Recommended Vent Cover For A MaxxAir MaxxFan 4751KS

Question

Question:

I have a Maxxair fan in my camper and want to purchase a cover for it. When the Maxxair 4751KS wall control is used to open fan lid or fan button is depressed the lid opens all the way, there is no halfway or partial open with wall control so Camcos wont work because they are too short when vent lib is fully open. I can manually open but that requires getting a ladder out and then the fan cant be operated. Any cover or fan upgrade options. My old camper I could partially open all vent lids but not this one. Thanks,

asked by: Steve C

0

Expert Reply:

For a MaxxAir 4751KS you'll want the MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip - White # MA76JR ( # MA26JR for Smoke and # MA86JR for Black). If your vent doesn't have the EZclip connectors then you'll simply need to screw the included brackets into the side of your vent to attach your new cover.

expert reply by: Kevin C

0

Answer 1

Actually the type of roof vent cover you need to attach to the vent cover brackets of your Maxxair 4951KS like part #MA00-04500K is the part #MA00-955003 which uses those brackets with the included cotter pins of the cover.

view full answer...

Answer 2

For a MaxxAir 4751KS you'll want the MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip - White #MA76JR or if you meant the lid you'd want the part #MA10A40002K.

view full answer...

Answer 3

Yes, if you check out the picture of the underside of the MaxxAir II RV and Enclosed Trailer Roof Vent Cover #MA76JR that I attached you will see the screen that is on the inside of the cover that would prevent bugs from entering.

view full answer...

Answer 4

The Replacement Bug Screen for MaxxAir II RV and Trailer Roof Vent Covers #MA10-20121 are the correct bug screens for a MaxxAir II Vent Cover. The screens just snap into the cover for an easy installation.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Recommended Vent Cover For A MaxxAir MaxxFan 4751KS

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching