Smoked Version of the MaxxAir II Vent Cover

Question

Question:

Do you sell Max Air 2 smoked vent cover

asked by: Chris N

0

Expert Reply:

We have the part # MA26JR which is a smoked MaxxAir II vent cover like you are looking for.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I spoke with my contact at MaxxAir regarding the MaxxAir 2 Vent Covers like the Smoke #MA00-933073 that you were looking at and the Standard Covers like #MA00-933067. He said there are two primary differences between the two models. The first is that…

view full answer...

Answer 2

I did some checking and for your MaxxFan 4900K vent the MaxxAir II RV and Enclosed Trailer Roof Vent Cover #MA26JR that you referenced is a confirmed fit.

view full answer...

Answer 3

The MaxxAir II RV and Enclosed Trailer Roof Vent Cover #MA26JR that you referenced can be used with the MaxxAir MaxxFan Plus #MA00-04500K that you are interested in. You may know this already but the #MA00-04500K comes with a rain sensor that will…

view full answer...

Answer 4

For your MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote #MA00-04500K, the MaxxAir FanMate Rain Cover is your best fit for fully functionality. These come in 3 colors: Smoke #MA00-955003 White #MA00-955001 Black #MA00-955002 This will allow…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Smoked Version of the MaxxAir II Vent Cover

Product Page this Question was Asked From

Continue Researching