Will MaxxAir 4951KS Lid Open All the Way when Using MaxxAir II Vent Cover

Question

Question:

Will this vent allow for complete raising of the cover of a MaxxAir4951KS ?? The vent cover is opened by a remote switch, so opening part way is not an option. The vent is located on a 2017 Grand Design 337 RLS

asked by: Chap

0

Expert Reply:

The MaxxAir vent cover # MA26JR will allow MaxxFan and MaxxFan Plus models to open all the way. However for those models the FanMate cover is recommended, # MA00-955003. I have linked a couple of videos on the FanMate cover for you.

expert reply by: Michael H

0

Answer 1

Since pulse modulation does not look like it's going anywhere, you are going to need the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera #FR87PR.

view full answer...

Answer 2

Hey Steven, thanks for reaching out! What you're needing to fix your problem is the 7-Way Vehicle Power Adapter #FR87PR. GM, in their almighty wisdom, decided to lower the power output on the 12V pin in certain situations so what's happening…

view full answer...

Answer 3

The MaxxAir Vent Covers part #MA86JR and part #MA00-955003 both are just used to cover the vent to protect it from the elements. However, the MaxxAir FanMate part #MA00-955003 is designed for the high power fan models because it does allow almost…

view full answer...

Answer 4

The tallest roof vent cover we offer in white is going to be the MaxxAir FanMate RV and Trailer Roof Vent Cover part #MA00-955001 which is about 10-1/4" at its highest point. I will say that most of the auto-open roof vents will stop raising…

view full answer...

Answer 5

For your Fan-Tastic Vents fan, you want the MaxxAir FanMate RV and Trailer Roof Vent Cover #MA00-955003. This is your best option for your Fan-Tastic vents fan and has the translucent feature you are needing. It is a smoke (grey) color.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Will MaxxAir 4951KS Lid Open All the Way when Using MaxxAir II Vent Cover

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching