bing tracking image
  1. Accessories and Parts
  2. Furrion
  3. RV Camera System
  4. Camera
  5. Side Camera
  6. Right Side Camera
  7. Left Side Camera
LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2
Furrion

LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2

Part Number: FCE48TASL
In Stock
$268.68
Accessories and Parts
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Waterproof marker light side cameras with night vision are designed for use with Vision S 5" and 7" systems. 65-Degree viewing angle and motion detector minimize blind spots. Detachable light cover allows easy access to replace your bulb. 1-800-940-8924 to order Furrion accessories and parts part number FCE48TASL or order online at etrailer.com. Free expert support on all Furrion products. Great prices and Fastest Shipping for LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (56)
  • Q & A (0)
  • Photos

Furrion Accessories and Parts - FCE48TASL

  • RV Camera System
  • Camera
  • Side Camera
  • Furrion
  • Right Side Camera
  • Left Side Camera
  • Black

Waterproof marker light side cameras with night vision are designed for use with Vision S 5" and 7" systems. 65-Degree viewing angle and motion detector minimize blind spots. Detachable light cover allows easy access to replace your bulb.


Features:

  • Marker light cameras replace your clearance lights to improve visibility and obstacle detection for your RV or camper
    • Minimize blind spots on both sides of your RV and help prevent accidents
    • Gives you a 65-degree viewing angle
    • Designed for use with Furrion Vision S backup camera system (FOS05TASF and FOS07TASF)
  • DOT- compliant, waterproof marker lights with detachable cover allow easy access to replace your bulb
  • CMOS sensors create high-quality digital video in full color
  • 12 Infrared LED lights on the camera's housing provide night-time vision up to 39'
    • Integrated IR cut filter blocks infrared light during the day to capture natural-looking images
  • Motion detection triggers monitor (sold separately) to power on
  • Durable, metal construction is dust resistant and waterproof
    • IP65-rated to protect against dust and low-pressure water jet spray
  • Simple installation - minimal drilling required
    • Mounting hardware not included
    • (8) #6 x 3/4" Self-tapping screws are recommended
    • Includes 4x 1/4" light bracket screws


Specs:

  • Overall dimensions: 5-3/4" wide x 3-3/8" tall x 1-3/4" deep
  • Mounting hole spacing:
    • Vertically (left side): 1-1/8" center to center
    • Vertically (right side): 5/8" center to center
    • Diagonally: 3-1/8" center to center
  • Resolution: 720 x 480
  • Voltage: 12V - 24V DC
  • Wire length: 5"
  • 1-Year warranty


Marker Light Side Cameras

Marker Light Side Cameras

Designed for use with the Furrion Vision S wireless RV backup camera systems (FOS05TASF and FOS07TASF - sold separately), these marker light side cameras are the ultimate upgrade for your RV's side marker lights. They give you the same DOT compliant marker lights with the added benefit of waterproof side cameras with LED night vision and motion detection. The cameras enhance visibility and minimize blind spots by giving you a wide 65-degree viewing angle. They also have detachable light covers for easy access to replace your bulbs.


Infrared LED Night Vision

LED Night Vision

Each camera has 12 infrared LED night vision lights that produce a clear, quality picture and give you the flexibility to back up your RV in low-light conditions at dusk or in complete darkness at night.


Motion Detection

When used with your Furrion Vision S wireless RV backup camera system (sold separately), the motion detect feature on the system's monitor allows you to set the motion sensitivity level of your cameras to low, medium, or high. On the low setting, your cameras will not detect a pesky raccoon until it's very close or already in your garbage, whereas on high setting, they will detect the raccoon approaching from further away. Your monitor will automatically illuminate to alert you once motion is detected.



2021123791 Marker Light RV Side Cameras for Furrion Vision S Systems - Night Vision - Qty 2

Replaces 733325 and 110469

Alt 405206ET

Alt FCE48TASH





Customer Satisfaction Score:


Customer Reviews

LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2 - FCE48TASL

Average Customer Rating:  4.7 out of 5 stars   (56 Customer Reviews)

Waterproof marker light side cameras with night vision are designed for use with Vision S 5" and 7" systems. 65-Degree viewing angle and motion detector minimize blind spots. Detachable light cover allows easy access to replace your bulb.

by:

Perfect integration with the Furion rear camera system. Did purchase the larger screen to give more visibility to what the cameras are showing. Easy install and weatherproof seals.



by:

Great product! Easy to install and works great . The picture is very clear and system was easy to pair up with my rear view camera. Instructions were very clear. I do wish the wires were longer . I chose to install above existing light as I wanted the camera higher than the factory lamp was located.



by:

Was exactly what I wanted for replaceme nt.



by:

These work as advertised. I bought with the 7" monitor which is key to seeing the images provided.



by:

Everything went smoothly and received the product in just a few days. It took less than 30 minutes to install both cameras after watching an online from strainer.



by:

Exactly what I needed a great product really good price and an excellent representative Joanne talked me through all the best options to fit my needs i can't say enough about her !! tyvm !!



by:

Installed them today. My 5th wheel was pre wired so I just had to add on the cameras to the existing side marker lights. They had a plug there in the cameras place. Did notice you had to have the truck hooked up to the 5th wheel in order to get power to the cameras. Then the pairing to the monitor was very easy.

Charles E. profile picture

Charles E.

6/20/2022

Amazing! We pull a 39 5th wheel with our dually as if its not there! It was easy to assemble and fit perfectly into our new trucks puck system! We bought the size bigger than we needed, works great!



by:

These cameras have very good images.
Be
aware when you place them as Awning Arms vs camera location can restrict your view. They work well in all light conditions and take the worry out of what is there behind & beside, especially on the Offside. Furrion’s Prodcut support is excellent should you need it. Install & pairing are relatively easy.
Adding these camera’s to the review/backup just completes the all round view.

Steve K. profile picture

Steve K.

7/10/2021

Would not be without them. Makes maneuvering easier and Mike eases directions from spotter.



by:

Work great very wide angle.
covers two
lanes.



by:

Never got them to work like they should before we traded the RV. It had something to do with trucks running light voltage on my 2021 GMC Denali being too low. It could be fixed using a relay and powering them from the trailer batteries and using the truck lights to trigger the relay. But since we decided to trade the rig I didn’t bother adding the relays. They did work well when I tested them being powered directly off the trailer battery. The trucks cameras are so good if I had to do it again I probably wouldn’t buy them. BUT if you don’t have side cameras on your truck you will like them.



by:

Bought the side marker light cameras & rear view camera for a new 5th wheel that we took on a 2 1/2 month; 11,000 mile trip. One of the side cameras malfunctioned but was replaced at no cost to me. The rear view camera is very useful and works very well. The side cameras are less helpful. I have a better view of what is going on next to me by using the side mirrors. Also, the rear view camera is better at seeing what’s behind me and what is about to pass on either side, it also let’s me know when I can pull back into my lane when I’m passing someone. Although I can have all three cameras displayed on the monitor at the same time, the pictures are so small as to be useless when driving. Switching from from rear view to side view takes attention from driving and several seconds to accomplish. Additionally, the passenger (right) side camera’s view is partially obscured by the arm for one of the awnings on that side.

Having said all that, the side marker cameras work well, but are not as useful as I’d hoped they would be. Knowing what I now know, I probably would not purchase them again.



by:

Extremely happy with the product. Very easy to install and working great. Thank you for good service and speedy delivery.



by:

Works great and was easy to install, excellent safety device



by:

Work great. Easy to install. No issues syncing with monitor.

Kenneth profile picture

Kenneth

8/28/2023

One camera failed but Furrion quickly replaced under warranty. Furrion was easy to deal with. Honestly, I dont use the side cameras. My mirrors can be set to see both sides of my 5th wheel. So these are just a nice to have rather than a neccessary item. The rear view camera I count as a requirement.



by:

We wanted these for our new 5th wheel that was prewired for them. It was cheaper to upgrade our 4.3 backup monitor to The 7” and add the side cameras versus buying a new setup.



by:

These are great for providing a wide view of blind spots. This is useful for backing up as well. In my setup, I have to have the lights (or parking lights) turned on for them to work, but that is a minor issue.



by:

Cameras work great. They are every bit as good as the OEM equipment on our car. I drive with them on continuously to be aware of traffic around my 5th wheel.



by:

Excellent cameras. Has great wide angle view. Like the wireless feature. I give the cameras five stars. I just didn't care for the way they shipped the product. Yes you get free shipping, but they ship it UPS then transfer it to the post office which takes an extra two days to get. Should just have left it with UPS delivery only. That's why I gave only four stars.



by:

Game changer, a little difficult to pair. Turn camera and screen off, try again(3 times=success)! Now they pair, everytime.



by:

Very easy install on a 33’ Tralee trailer. But just an FYI, you’ll need to go out and buy your own screws. Otherwise great cameras and good picture. As far as reception I was able to get about 300’ away before I saw the slightest flicker. Definitely buy the 7” monitor for sure! Love doing business with etrailer! My goto for everything.



by:

Just installing them now. Very easy installation. Can't wait to see how they are working going
222
down the road.



by:

Easy install, works well on the road and helpful for a little extra blind spot view when backing in.



by:

would be nice to have the cameras adjustable but everything is working great



by:

Great customer followup Sharon kept me personally informed about the status of my order. I was on a tight schedule, I feel the order was expedited, and delivered a day earlier than promised. Thank you

Fred profile picture

Fred

6/10/2022

Failed again, the 3 pin contact between the housing and camera is not water proof. The contacts corrode and the unit fails. Takes about a year to fail.

KatrinaB profile picture

Katrina B.

7/8/2022

I am sorry that this unit has failed you. I have gotten in contact with the manufacturer ad they have confirmed that the unit is indeed waterproof and the contacts should not be in the open to get water on them. The side cameras will need replaced. I have sent your information over to them for them to get into contact with you on a possible replacement.


by:

Easy to install, easy to use, works great! Great customer service by etrailer as well! Really well done!


25
56
Show More Reviews

See what our Experts say about this Furrion Accessories and Parts

  • Should Camera of Marker Light RV Side Cameras Be Above or Below Clearance Light
    The most common way to install the side marker cameras part # FCE48TASL is with the camera above the light like in the picture I attached.
    view full answer...
    Image 1 for
  • Can A Truck Bed Camera Be Used With the Furrion RV Observation Camera System
    The Furrion RV Observation Camera System part # FOS43TASF which is a fit for your 2019 Keystone Montana 3121RL can be paired with side cameras like the Furrion Vision S Side Camera w/ Marker Light Bracket part # FCE48TASL for increased visibility of the trailer but they currently do not offer a camera for the vehicle. I assume your 2019 Keystone Montana 3121RL has a pre-mounted bracket specially for the Furrion RV Observation Camera System so I recommend you use this system for your trailer...
    view full answer...
  • Troubleshooting A Furrion Vision S RV Camera System Monitor That Goes Black When Using View All
    I spoke with Furrion and found that this is a known issue with the wiring on the side marker cameras # FCE48TASL. A lot of people have been installing the trigger wire in with the power wire instead of running it to the turn signal or just capping it off. I've attached an installation video I did below where I show the wires for the cameras at the 6:18 minute mark. You'll want to remove the whole side marker camera from the trailer to get to the wiring and disconnect the trigger wire...
    view full answer...
  • No Power To Furrion Light/Side Camera
    The Marker Light RV Side Cameras part # FCE48TASL for the Furrion Vision S Wireless RV Backup Camera System part # FOS05TASF is powered via the running light circuit. Therefore, if you don't have power to the light/camera you will need to ensure you have power to the running light wire leading to the light/camera. If not, check the vehicle's fuse box for the trailer tow running light or trace the wire back to the trailer connector while checking for breaks. The other two possible causes...
    view full answer...
    Image 1 for
  • What Backup/Observation Camera Do I Need for a 2017 Forest River Heritage Glen
    Yes, the Furrion RV Observation Camera System part # FOS05TASF is exactly the system that you will need to use the pre-wired backup camera mounting bracket on your 2017 Forest River Heritage Glen. The part # FOS43TASF that is listed on the bracket is the same version as the above but with a 4.3" screen instead of the larger 5" screen. They both use the same camera, so you won't have any issues. The camera will plug into the bracket you have installed now without any wiring required. Once...
    view full answer...
    Image 1 for
  • Is Furrion Vision S Camera Compatible with In-Dash Monitor on 2019 Chevy Silverado 2500HD
    While we do have camera options that link up to the in-dash monitor on your 2019 Chevy Silverado 2500HD (see linked selection), these are for the 3rd brake light. The Furrion Vision S system uses it's own monitor so you'll need to get one of the following kits to add it to your towing rig: 4.3" Monitor - # FOS43TASF or 5" monitor - # FOS05TASF. I recommend going with either the 5" monitor because the 4.3" option is only compatible with one camera. If you use the larger system, then you...
    view full answer...
  • Camera Setup for Rear of Tow Vehicle and Trailer
    The easiest way to pull that off would be with the Furrion Vision S system part # FOS05TASF which comes with a single rear camera that you could put on your van or on your trailer. And then for a second camera for the other location you'd just need the part # FCN48TASF. If you wanted side cameras too you could then use the part # FCE48TASL. This whole setup is wireless too which means that there would be minimal wiring required.
    view full answer...
  • Looking For Furrion Side Marker Cameras
    Hello Scott. The Furrion Side Marker Cameras are available as part # FCE48TASL. I am not quite sure what you mean by "side markers that the cameras plug into", but these cameras hardwire into the existing wiring for the clearance lights. If this is not what you are looking for feel free to comment below with more detailed information and I am happy to look into it.
    view full answer...
  • Best Camera System for RV Pre-Wired for Furrion Camera System
    The best camera system pre-wired for use with a Furrion observation camera is the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision # FOS05TASF which has a 5-inch screen. These camera systems are the best option because they are not only highly effective but also easy to use and set up in a pre-wired trailer. The Furrion Observation camera system has a camera that has a shaded design so glare in the bright sun won't be a problem, and also has infrared so you can use it...
    view full answer...
  • Recommended Monitor Size for Furrion Vision S Wireless Camera System
    I recommend going with the 5" # FOS05TASF monitor screen because you can only use 1 camera with the 4.3" # FOS43TASF screen. With the 5" option you can add an additional 3 cameras with parts # FCE48TASL and # FCN48TASF so that you can see behind you, on either side, and then use the 4th camera wherever you see fit. If you like the idea of the side marker lights right off the bat then these are offered packaged with the 5" # FCE48TASL-05. I personally like the larger monitor better because...
    view full answer...
  • Best Multi Camera System Recommendation for 2019 Grand Designs 328M Toy Hauler
    Since you have a 2019 Grand Designs 328M pre-wired for a Furrion system and you are wanting a setup that will give you the ability to view multiple camera views the best and easiest solution is going with a Furrion 5 inch Monitor and Camera kit part # FOS05TASF with the clearance light camera kit part # FCE48TASL as well. What's great about this setup is that the install is super simple since your vehicle is already setup for the camera at the rear of the vehicle and then the clearance...
    view full answer...
  • Recommended Furrion RV Camera System Compatible with Pre-Wired Camping Trailer
    There are 3 camera options compatible with your pre-wired 2019 Grand Design Imagine travel trailer. They are the same camera, with different monitor options and two of the three have additional features. The Furrion RV Observation Camera System w/ Monitor and Bracket - Wireless - 4.3" Screen # FOS43TASF due to the screen size does not allow you to expand your system to multiple cameras or views. The 5 inch # FOS05TASF allows up to 4 cameras in quad view and also comes with security...
    view full answer...
    Image 1 for
  • Furrion Side Cameras Come On When Brake Pedal is Pressed
    In regards to the LED Marker Light RV Side Cameras part # FCE48TASL, there are only three wires you should be using. The brown and red wire get tied together and then attached to the running light power wire coming from the old light, the black wire get tied into the ground wire coming from the old light. I recommend checking over all the wiring to ensure you have it wired as such. I did a video on this exact process if you want to fast forward to the 10:00 mark in the video linked below.
    view full answer...
  • Observation Camera System with Side Cameras for 2020 Grand Design Momentum 395M
    Your 2020 Grand Design Momentum 395M that you referenced was pre-wired for a Furrion observation camera system so for a setup that includes the rear camera as well as the side cameras we have the # FOS05TASF for the rear camera and then to add the side cameras you'd want the # FCE48TASL. I attached install videos for both of these for you to check out as well.
    view full answer...
  • Backup Camera System Used with Factory Monitor on a Ram 3500
    I do have a camera system that will tie into the factory in-dash monitor on a 2010 - 2019 Ram 3500 with the Truck Bed Cargo Camera for Factory Monitor part # 3460015 but this as I am sure you can see installs on the vehicle and is used predominantly for hitching the trailer to an in-bed hitch. I am not aware of a backup/observation system for the trailer that works in conjunction with the factory in-dash monitor. The best wired trailer camera system we have for you is the Rear View Safety...
    view full answer...
  • How to Install Furrion FCE48TASL Side Cameras On RV with Diagram
    To add two side cameras to your Furrion Vision S Wireless RV Backup Camera System with 5" Screen # FOS05TASF, you can use the Marker Light RV Side Cameras # FCE48TASL. I can understand your concern with the trailer having all LED lights, but it will not be an issue on an RV like yours which will provide more than enough power. So, the # FCE48TASL install the same as any 2-wire (power and ground) side marker light, with the addition of the extra red wire to power the camera. I have attached...
    view full answer...
    Image 1 for
  • Installing Furrion Side Marker Light with Camera on 2019 Momentum 351M
    The Furrion Side marker lights with camera # FCE48TASL you will have the running light wire (brown) camera power (red) and ground (black). Because it sounds like you have two sets of wires, it is likely one set is running light power and the other is the ground. You can use a circuit tester like # PTW2993 to determine function. Once you have done so, the brown and red wires connect to the running light power and the black will connect to ground. This will give you camera power as long...
    view full answer...
    Image 1 for
  • Can a Furrion Wireless Backup Camera and Observation System Be Used with GM Infotainment System?
    I have a solution for you, but GM has made it so that only the IntelliHaul Echo Master cameras are wirelessly compatible with their Infotainment systems and we haven't come across any aftermarket wireless observation system for RVs that can be paired with these sytems. With that being said, there are some bonuses that come along with using a Furrion system like the # FCE48TASL-05 (5" monitor) which has the rear camera and monitor, as well as side marker light cameras. These side view...
    view full answer...
  • Can Just the Camera of the Furrion Vision S Side Camera w/ Light Bracket # FCE48TAS Be Installed
    You can pretty easily separate the camera from the taillight on the Furrion Vision S Side Camera w/ Marker Light Bracket # FCE48TASL that you referenced. I attached a picture of what that looks like. There isn't a cover though for this situation.
    view full answer...
    Image 1 for
  • Backup and Observation Camera Compatible with Factory Pre-Wired Trailers
    Your 2019 Prime Time Tracer Breeze 25rbs like many others is pre-wired by the manufacturer specifically for the Furrion Observation Camera System. We have two options available with the 5 inch monitor monitor being able to do split screen for additional cameras where the 4.3 inch does not have that split screen option due to the monitor size. Here are the options: Furrion RV Observation Camera System w/ Monitor and Bracket - Wireless - 4.3" Screen # FOS43TASF Furrion RV Observation...
    view full answer...
  • Side Marker Cameras For Furrion Vision S Camera System With 7" "Monitor
    As you already have the Furrion Vision S Wireless RV Backup 7" Camera System you simply need the LED Marker Light RV Side Cameras # FCE48TASL.
    view full answer...
  • Availability of Replacement Light Solution for Furrion Vision S Side Camera Kit
    For just the light and mounting bracket for the Furrion side camera kit we have the part # FR66PR for the driver side.
    view full answer...
  • Replacement Camera For Furrion FOC48TA-BL On 5TH Wheel Camper
    Unfortunately Korey, you are going to have to update your camera system as your Furrion FOC48TA-BL is an older version which Furrion discontinued. We have the 4.3" Kit # FOS43TASF, 5" Kit # FOS05TASF or 7" Kit # FR98NR you can use to replace your current camera and monitor. The communication method changed which is why you cannot use your current monitor. We also have the Side Cameras # FCE48TASL which are compatible with the 5" and 7" monitors if you want to add them to your camper.
    view full answer...
  • Are the Replacement Marker Light and Bracket for Furrion Vision S RV Camera System LED
    Yes, the Replacement Marker Light and Bracket for Furrion Vision S RV Camera System part # FR24PR for passenger side or part # FR66PR for driver side is LED. These are direct replacements for the LED Marker Light RV Side Cameras with Night Vision for Furrion Vision S Systems part # FCE48TASL.
    view full answer...


< Previous
123. . .11



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Kathleen M
Video by:
Kathleen M
Employee Dustin K
Video by:
Dustin K
Employee Charles A
Video by:
Charles A
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Adam Y
Updated by:
Adam Y
Employee Noah M
Updated by:
Noah M
Employee Amanda M
Edited by:
Amanda M
Employee David F
Test Fit:
David F
Employee Kevin C
Test Fit:
Kevin C
Employee Halie H
Written by:
Halie H
Employee Michael B
Installed by:
Michael B
Employee Evangeline M
Installed by:
Evangeline M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924