Can I Add Snappad Block To etrailer Swivel Trailer Jack e35YV ?

Question

Question:

I already bought the black 2,000 lb swivel jack e35YV from you guys without the SnapPad. I love the jack but can I add the SnapPad later, or is that only available if I buy the other version from the start?

asked by: Tyler

0

Expert Reply:

Hey Tyler! You can add the SnapPad! If you already have the etrailer Sidewind Trailer Jack - Swivel Bolt - 2K # e35YV, you can add the SnapPad using # SN47FR.

That is a nice upgrade if you park on gravel, grass, dirt, or softer campsites and want a wider, more stable base than the standard round foot. It gives the jack more contact with the ground and helps reduce sinking without carrying a separate block around. If your foot is already damaged or missing, then I’d look at # e44QV instead since that gives you the replacement inner tube with the SnapPad included.

What kind of trailer do you have, Tyler?

expert reply by: Andrew N

0

Answer 1

Hey Brian! Yep, for your boat trailer, I’d skip the etrailer A-frame drill jack #e38AV since your trailer doesn't have that standard 3-bolt A-frame jack mount. That could be fabricated to fit, but that's a lot of unnecessary work. For a…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 4

Hey George, best solution for you will be to go with an all new jack like the etrailer part #e95YV because Fulton is no longer in business so there isn't a way to get a replacement F2 and none of the other jacks out there use the same bolt…

view full answer...

Answer 5

Hey Ben, the deciding factor is really where your current jack mounts and whether you want it to stay in that same location. If your enclosed trailer already has a standard A-frame jack opening and you’re happy with the jack staying in the center,…

view full answer...

Answer 6

I sure do Steve! To replace your Triton boat trailer's jack, I recommend our etrailer Sidewind Aluminum Jack with Wheel item #e95YV. This is a 1,500 lbs capacity jack, that will provide 12" of travel, and has a built-in wheel for easy moving…

view full answer...

Answer 7

Hey Brian, thanks for reaching out. I went out to our warehouse and measured one of the etrailer Sidewind Aluminum Jacks #e95YV. The distance from the center of the bracket to the bottom of the wheel is approximately 14" with the jack fully…

view full answer...

Can I Add Snappad Block To etrailer Swivel Trailer Jack e35YV ?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching