SnapPad Mini Jack Pads for Travel Trailers w/ BAL - 5-1/2" Square Jack Feet - Qty 4

Part Number: SN39FR

459 Reviews | 14 Questions

In Stock

$122.63

Retail:$134.95

You Save: $12.32

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

snappad rv jack pads 4 square foot sn39fr

snappad rv jack pads 5-1/2 inch foot square mini for travel trailers w/ bal - feet qty 4

snappad rv jack pads 5-1/2 inch foot permanent mini for travel trailers w/ bal - square feet qty 4

snappad rv jack pads 5-1/2 inch foot 4 mini for travel trailers w/ bal - square feet qty

snappad rv jack pads 5-1/2 inch foot square sn39fr

snappad rv jack pads 5-1/2 inch foot permanent

snappad rv jack pads square foot permanent sn39fr

Show All (14) Product Images

Show Fewer Product Images

Customer Photos

SnapPad Mini Jack Pads for Travel Trailers w/ BAL - 5-1/2" Square Jack Feet - Qty 4 customer photo

Show All (5) Customer Images

Show Fewer Customer Images

Videos

SnapPad Mini Jack Pads for Travel Trailers w/ BAL Review

Show All (1) Videos

Show Fewer Videos

Need help with installation?

Locate installers near me

Designed for travel trailers with BAL leveling systems, these sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area provides added stability on soft ground. Includes 4 pads. Great Prices for the best rv jack pads from SnapPad. SnapPad Mini Jack Pads for Travel Trailers w/ BAL - 5-1/2" Square Jack Feet - Qty 4 part number SN39FR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (459)
Q & A (0)
Related Parts
Photos

SnapPad RV Jack Pads - SN39FR

Features:

Heavy-duty rubber pads snap onto your travel trailer's BAL leveling to make leveling faster and easier
- Eliminates the need to crawl under your trailer to position plastic pads or wood blocks
Increased surface area of your leveling jack's feet provides added support for your trailer
- Prevents sinking into soft ground, unlike smaller metal feet
Durable, heavy-duty rubber is made from recycled tires
- Grips uneven terrain and prevents metal feet from rusting or bending
- Serves as a cushion so metal feet won't crack or chip your driveway
- Helps dampen vibration from inside motorhome that could cause shifting
Built-in drains release moisture to prevent jack feet from corroding
Simple, one-time installation
- Line up the pads beneath the jack feet and lower each foot until the lip on the pad fully engages and locks in place
- No need to remove and replace pads or carry other jack pads or blocks around with you
Made in USA

Specs:

Application: travel trailers with (4) 5-1/2" square jack feet
Diameter: 8-1/8"
Weight: 3 lbs per pad
2-Year limited warranty

Simple, One-Time Installation

SnapPads install quickly and easily, and never need to be removed. Install each pad one at a time. Begin by placing the pad beneath your jack, ensuring that the pad and foot are properly aligned.

Lower the jack until the lip of the pad fully engages around its foot and locks into place. You'll hear a snapping sound once the pad is securely installed. Repeat this process for the remaining pads. Installation is permanent, so once you have the SnapPads secured, you'll never have to worry about crawling under your RV to place pads again.

BL5SP4 SnapPad Jack Pads for Travel Trailers w/ 5-1/2" Square BAL Stabilizer Feet - Quantity 4

Installation Details SN39FR Installation instructions

Customer Satisfaction Score:

96% were satisfied with this product

4% of customers were not satisfied

etrailer mistake
Wrong item was ordered
Did not arrive in time

4% of customers were not satisfied

etrailer mistake
Wrong item was ordered
Did not arrive in time

4.8

459 reviews

5 Stars		(410)
4 Stars		(36)
3 Stars		(8)
2 Stars		(1)
1 Star		(4)

by: Mox Nix 08/27/2026 One Year Later

We live in South Florida, the feet of our stabilizing jacks used to sink into the sand. Small addition, but really helps. Gives some grip and a little more stability to the feet. Definitely would purchase again. Highly recommend.

Kate F.

8/31/2026

SnapPads are great Mox Nix. I am so happy you discovered them, and are helping giving you a bigger foot so you can get the things stabilized with the sand =)

by: Steven J 03/31/2025

2022 Toyota Tacoma

Just got back from our first camping trip of the year. I installed the pads before we left and installation was very easy. I really love the pads. I don't need to use any lego blocks anymore if the campsite is fairly level. The trailer also seems to be more stable likely due to the pads absorbing more vibrations than the plastic blocks due. I'm very happy with these.

Steven J. One Year Later

3/31/2026

Im still loving my Snap pads. They stay on my stabilizers very well and save me time.

by: Regina 06/12/2025 One Year Later

Still working great and attached after many bumpy travels over a year. Love the non-skid surface & something that’s attached…one less thing to haul around & deal with when setting up

Regina One Year Later

6/22/2026

Great. Still attached &amp looking good

by: Mike 06/09/2026

2021 Airstream Globetrotter Travel Trailer

Super quick on the shipping and delivery. Install was a little more challenging than expected as only three of the four sides of the stabilizer foot slid easily into the Snap pad (no matter how much dishwashing liquid I used!). Finally got them to set and they look and work as advertised.

by: Brian 08/08/2026

Super easy to install. Look great on my trailer. Looking forward to my camping trip with them.

by: John 07/30/2021

‘Purchased a set of 4 to use on our 2019 AS, a 25’ International Serenity model, which has 5 1/2” square stabilizer feet.
‘Some hesitancy placing the order as most reviews appeared to have vehicles with round stabilizers.
Manufacturer & delivery took months but was worth the wait: these are thick, heavy-duty, compressed rubber ( think rubber stall mat for race horses) and a nice, tight fit.
The fit was tight enough that mounting required me to remove the foot from its arm and use a channel lock wrench to torque the snap pad edge enough for the foot plate to fit into the product groove. Once in, it appeared to be snug enough to stay there for the long haul.
Re-attaching foot & pad to the stabilizer arm required another edge torque ( minimal pressure) to get the long attaching bolt to slide into its housing holes.
….long winded review for a simple Excellent rating of this product.
I wasn’t disappointed with this purchase

Click to Enlarge

John One Year Later

8/1/2022

Used product for 1 yr. now. Still impressed and an excellent rating is warranted. You wont be disappointed with these.

by: Loretta 03/20/2026

Snap pads on stabilizer and tongue jacks are great! We no longer have to worry about ground conditions or putting blocks underneath the jacks to help stabilize our camper.

by: Sam 03/25/2025

They're exactly what I thought they were. They work great and I can't wait to try them out. A little hint when you install them, watch the video, use the soap and let them warm up first makes it a whole lot easier

Sam One Year Later

3/26/2026

I have had no issue with the pads. The camper is solid but seems a bit quieter when I stomp around - could just be me. I have but has to use additional blocks, but have also been in level sites. Would still recommend them.

by: Jeffrey 07/18/2026 One Year Later

Great product. Have put them on 2 trailers now. Won’t be without them.

by: Mike 07/15/2026

Installed on a 2026 Winnebago Thrive 18fbs.
Snapped right on no problem. In a week will see how they work. I’m sure they will work just fine.
So nice not to haul those wooden blocks around anymore.

by: Pmb-Gh 05/27/2022

These snap pads look heavy duty and should protect and cushion the rv stabilizer foot pads. These installed in a quick snap! Pardon the pun.

Click to Enlarge

Pmb-gh One Year Later

5/28/2023

Best product ever. Protects and secured a good grip on any surface. Love these snap pads and I highly recommend them.

by: Brent 05/13/2026

Fit was perfect. Fast shipping.

by: Randy 06/16/2026

2018 Airstream Flying Cloud Travel Trailer

Installation was a "snap".

by: Paul 05/11/2026

Always great customer service as well as a great product. We continue to be repeat customers!

by: Jim 07/31/2026

I have only had them a short while but so far I have no complaints. Getting them on by myself was difficult, it was just a Snap in as I had thought.

by: Justin 09/03/2024 One Year Later

The day I bought these I got to stop using plastic or wood for under my stabilizer jacks. One of the best things I bought for my camper. Faster set up. Meas more time with family !!!!! Thanks again

Justin One Year Later

9/20/2025

Hanging on strong. Still one of the best things I bought for my camper.

by: Daniel 09/08/2025

The product—the build—is awesome. The pads are solid and made very well. The concern I have is the fit of the pads to my truck camper's round, 5 3/4" jack feet. After putting one of them on a jack I quickly became uncomfortable as to how easy it was to take the snap pad off. It didn't take much to push down on a corner of the snap pad when the pad fell off, hitting the ground. I'm afraid the pads will fall off during travel.I verified with e-trailer that I purchased the correct Snap Pads, time will tell.

by: Robert 09/28/2026

Great product

by: Allan 07/09/2026 One Year Later

Worked great on all kind of surfaces and they were easy to install.

by: Col. Allan 08/02/2025

2019 Airstream International Serenity Travel Trailer

Great product. My last set went on super easy, as I had a Lippert Auto-Leveling system that just ..forced...them into place. This 2nd set, for the stabilizer jacks on the Airstream, went on a bit tougher, two completely and two waiting for the weight of the trailer to slide the 4th side of the foot pad into place (yes, I used dishwashing soap both times). If the "weight waiting" doesn't work, I will try tapping the last edge into place with a rubber mallet when the stabilizers are lifted for travel next time.

by: Teresa 10/06/2025 One Year Later

I am not sure there are words to describe how fabulous the Jack Pads are. The Jack Pads stay on during travel and through all the weather elements. They give the jack a much bigger foot and that is helpful for stability.

by: Tricia 07/07/2026

2022 NuCamp TaB Travel Trailer

Great easy to install and on our first trip with them seemed much easier to set up camp.

by: Jeff 07/01/2026 One Year Later

Super convenient!!

by: Peter 09/18/2025

Nissan Titan

Fits snuggly on my Rico Titan truck camper jacks as recommended by the sales advisor Kimberly.

by: Robin 06/08/2026

They fit my Aliner great. Very stable and sturdy. Time will tell how well they hold up, but love them so far!

459

true

Show More Reviews

See what our Experts say about this SnapPad RV Jack Pads

Do you have a question about this RV Jack Pad?

Will The SnapPad Mini Jack Pads SN39FR Fit A 2018 Jayco Flight SLX With BL Levelers?
Hey Jerry, thanks for reaching out. Yes, if your 2018 Jayco Flight SLX has the BAL leveling system with 5-1/2" square metal jack feet, then the SnapPad Mini Jack Pads # SN39FR are the correct fit. They're designed specifically for BAL jacks with 5-1/2" square feet and snap permanently onto the jack pads.
view full answer...
Could SnapPad Mini part # SN39FR Fit 2024 StarCraft Super Lite
Hey Cass, can you measure the feet of your 2024 StarCraft Super Lite? The SnapPad Mini Jack Pads for Travel Trailers w/ BAL - 5-1/2" Square Jack Feet # SN39FR is designed to fit 5-1/2 inch square feet which might be what you have but I don't have a way to verify that. Let me know what you have and I'll get you what you'd need.
view full answer...
Recommended Jack Pads for BAL Type C Stabilizing Jacks without Jack Feet
Welcome back Linda and thanks for the pic! Unfortunately, the SnapPad SnapJack item # SN44VR are not going to work with your BAL Type C stabilizing jacks because the mounting tabs are too narrow. The SnapPad item # SN39FR are the only options to add jack pads to your BAL Type C jacks. They require the Base foot pad for C-Jacks part number 23200 that we do not carry. These are 5-1/2" square jack feet that are specifically designed for your leveling system that we do not carry. The SnapPad...
view full answer...
Will SnapPad Mini Jack Pads SN39FR Fit A 2025 Trade Wind 23 FBT With 5-1/2" Square Jack Feet?
Hey Mitch, thanks for reaching out. You’re right on target with your measurements. The SnapPad Mini Jack Pads # SN39FR, are made specifically for 5-1/2 inch square jack feet, so they’ll be a perfect match for the setup on your 2025 Trade Wind 23 FBT. Once installed, they’ll give you a wider footprint, better grip on uneven surfaces, and a little added protection for your landing gear. Just make sure the bottoms of your jack feet are clean before snapping them on so they seat correctly....
view full answer...
SnapPads for Arctic Fox Camper With 5-3/4" Round Jack Feet
Hi Mark; more than likely the 5-1/2" will work but it won't be the # SN27FR. With your 5-3/4" measurement you probably need the # SN39FR for square feet. These also fit 5-3/4" round Reico Titan jack feet which are common on a lot of Arctic Fox models. However, I can't completely confirm this without knowing the year and model of your camper. If you can add that information in the comments below I can make sure these are correct. Alternatively, if you can identify the jacks and they're Reico...
view full answer...
Which Snappads Fit The BAL Equalizer Leveling System
Hey John, the # SN39FR is specifically designed for for 5-1/2 inch BAL Power C jacks and is a set of 4, so that's what I'd recommend using plus two more of the part # SN67FR which is these pads individually for a set of 6. How do you like the BAL setup?
view full answer...
SnapPads for BAL Stabilizer on a 2020 Thor Quantum CR24 Class C
Hey Jack, thanks for reaching out! For a kit we have the SnapPad Mini Jack Pads for Travel Trailers w/ BAL # SN39FR, but this includes 4 of the pads. If you only want 2 of them then you'll need 2 of the Replacement Pad # SN67FR.
view full answer...
SnapPad's For an Artic Fox 865 Truck Camper With Rieco Titan Electric Jacks
According to SnapPad you are going to need their Mini Jack Pads # SN39FR. I know this may sound weird since you have 5-3/4" round bases and the pads have a square opening.
view full answer...
What SnapPads Fit Reico Titan Jack Feet that are 5 3/4" in Diameter?
Hi Tim, What you need for your Reico Titan jacks is the SnapPad Mini Jack Pads for Travel Trailers w/ BAL - 5-1/2" Square Jack Feet Part # SN39FR. We list them as a fit for the BAL leveling system, but SnapPad has this set on their site as being a match for the Recio Titan jacks with 5 3/4" jack feet as well. I definitely wouldn't try the 6" pads because the # SN39FR was specifically designed for the Reico Titan so the 6" pads wouldn't fit well. What kind of truck bed camper do you have?
view full answer...
SnapPad Feet for BAL Power C Jack on 2022 Winnebago Micro Minnie w/ 5-1/2 Inch Square Jack Feet
The # SN99FR SnapPads you'd looked at would be too large for the feet on your jacks, but we do offer a size that would work for you. The # SN39FR is specifically designed for for 5-1/2 inch BAL Power C jacks, so that's what I'd recommend using. I've confirmed this with my SnapPad representative, just to be sure.
view full answer...
Pad For Stabilizer Jack With 5-3/4" Feet
The SnapPads # SN39FR that you referred to are 5-1/2" in size and your metal pads are 5-3/4", so your feet are too big for the pads. You will need the # SN99FR pads designed for metal feet 5-3/4" to 6". Please measure all 4 feet before ordering. It is not unusual for front and back feet to be different sizes.
view full answer...
How to Determine Correct SnapPad Jack Pads for 2022 Keystone Bullet Crossfire 1850RB
In order to determine which SnapPad jack pad fits your 2022 Keystone Bullet Crossfire 1850RB you will need to know the shape and size of your jack feet. This information is not listed so you will have to check on your actual trailer. For example, the # SN39FR you were looking at is designed for travel trailers with 5-1/2" square feet. If you had 5-1/2" round feet you would need the # SN27FR instead. I have attached a link below with all of our available SnapPads that can be filtered by...
view full answer...
Recommended SnapPads for a 2025 Airstream Flying Cloud 25' w/ BAL Stabilizer Jacks
Hey Sean. It looks like the 2025 Airstream Flying Cloud 25' model comes from the factory with a BAL leveling system. Which would mean you'd need the SnapPad Mini Jack Pads for Travel Trailers w/ BAL item # SN39FR. The SnapPad Mini Jack Pads item # SN39FR are designed to fit 5-1/2" square jack feet. The bottom of your landing gears foot is going to press right into the pads so they stay locked into place while you're traveling. The SnapPad item # SN39FR are the smallest square pads available...
view full answer...
Could SnapPad Mini Jack Pads Fit 2019 Lance Model 1062 Camper
While we don't know for sure if the SnapPad Mini Jack Pads part # SN39FR will fit your 2019 Lance Model 1062 if you can measure the feet of your jacks now it should be pretty easy to figure out. If your feet are 5-1/2 inches square these will work. If you have a different size let me know or check out the attached link to see all of the options we have where you can select your foot size from the drop down menu.
view full answer...

Do you have a question about this RV Jack Pad?

Info for this part was:

Edited by:

Lindsey S

Expert Research:

Jameson C

Updated by:

Wilson B

Updated by:

Carrie F

Written by:

Mike S

Installed by:

Andy C

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.