Product Experts Available Now!
Call 1-800-940-8924
Furrion Vision S+ Wireless RV Backup System w/ 1 Camera - 7" Screen
(171 reviews)
Price: $479.00
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
Furrion Vision S+ Wireless RV Backup System w/ 1 Camera - 7" Screen
Part Number: FR57AD
In Stock
$479.00
Retail:$596.70
You Save: $117.70
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (171)
- Q & A (0)
- Photos
- Used (1)
Furrion RV Camera System - FR57AD
- Backup Camera
- Built-In Microphone
- Night Vision
- Waterproof
- Furrion
- 7 Inch Display
- Pre-Wired RVs
- Wireless
- 1 Camera
- Rear
- Suction Cup Mount
- Standard View
Whether you're driving, off hiking, or relaxing at camp, you'll always know what's behind your RV. Rear camera helps you navigate blind spots while changing lanes on the highway or backing into a tight space - and records video at night.
Highlights
- Steady Signal, No Lag: Get an immediate, real-time view even at high speeds or long distances
- Includes 1 Camera: Back into a tight space at the campground and monitor overnight
- Clear View, Day or Night: No glare, no guesswork - just a crisp, sharp picture whenever you need it
- Large 7" Screen: See multiple camera angles at once while cruising down the highway
- Waterproof: Backup camera works even if you're caught in a sudden rainstorm
- Installation Made Easier: RVs that are pre-prepped for Vision S+ need little to no drilling
Features to know about
Back Up With Confidence
Reversing into a tight campsite or navigating busy roads? No problem! The backup camera gives you a clear, top-down view while the built-in microphone lets you hear your spotter - no more yelling or frantic hand signals. It's also motion-activated, so it'll give you a clear view right from your monitor whether it's a late-night visitor, a curious critter, or an opportunistic thief. And you can record video with an SD card (not included) perfect for keeping an eye on things while out on a hike.
Reliable Wireless Signal in Any Setting
No more worrying about dropped signals, electrical interferences, or lagging video feeds! This wireless camera system delivers a stable, real-time view, even if you have a longer RV, motorhome, or box truck. It'll hold a steady connection for up to 100' as you're cruising down the highway and up to 492' once you've parked at the campsite.
Touchscreen Monitor Provides Clear, Crisp Views
Switch between camera views with a quick tap of a finger and get a clear, real-time look at what's around your RV. The anti-glare 7" screen supports up to 4 cameras and lets you watch 3 at a time to help you keep an eye on traffic merging onto the highway. Need help backing into your campsite? Rear park assist marker lines guide you right into place.
Quick Installation Without Complicated Wiring
This setup comes with 2 monitor stands, a cigarette lighter charger, and a USB-C power cable. The backup camera mounts at the back of your RV, and the monitor sticks to your windshield or sits on a tabletop - wherever works best for you! And if your RV is already prepped for the Vision S+ system, you'll have an even easier time getting it all set up with little to no drilling.
Specs
Monitor:
- Screen size: 7"
- Resolution: 1024 x 600
- Viewing angle: 85 degrees left, right, up, and down
Backup Camera:
- Overall dimensions: 6-5/8" wide x 2-1/2" tall
- Viewing angle: 140 degrees
- IP rating: IP65
- Number of LEDs: 8
- Quantity: 1
General Specifications:
- Voltage: 12V - 24V DC
- Camera resolution: 1920 x 1080
- Night vision distance: up to 16'
- Signal strength: 2.4 GHz
- Distance at high speeds: 100'
- Distance in open spaces: 492'
Warranty:
- 1-Year warranty
Additional Parts You May Need for Installation:
- Backup camera:
- 4 #6 x 3/4" Flat head self-tapping screws
- 4 #4 x 1/4" Self-tapping screws
- Sealant
- Insulation tape
2021124329 Furrion Vision S Plus Wireless RV Backup Camera with 1 Sharkfin Camera - 7" Screen
Alt FOS7HTASF
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Defective
Ratings & Reviews
4.6
171 reviews
by:
Michael from San Diego
04/28/2026
The camera was very easy to install. I planned on installing the camera 2-inches below the center running light, but instead I removed the center running light and installed the camera in its place, and less holes to drill for a cleaner look. I've had this rv trailer for over a year, but I've always traveled with a companion that could assist and spot me when backing up, but my next camping trip will be solo. It was important for me to have this camera installed for backing into the camp sites I've reserved, as these are not pull through sites. It will also be nice to see any vehicles that are directly behind me that my side mirrors can't pick up.
by:
Mark RVTERP
03/20/2026
Great place to purchase from. This replaces my OG Furrion setup. I will be using the same rear view mirror mount for the Vision S+ display. I need to get a photo of the new display mounted to the rear view mirror.
Gwendolyn Y.
3/26/2026
Did you 3D print your mount?
by:
Tom
10/11/2025
Installed and wired as directed. Originally plugged in the monitor to the USB/C cable and result was no power. Checked cord in plugging to my phone. Result said it was charging. Then checked the cig lighter pluggin. Result that the monitor works w/ lighter pluggin.
I'm not sure what the USB cord was sent along for. Now that I found a way to power it up. The camera and monitor works as I was hoping. I'm able to see my trailer clearly behind my pickup "slide in" camper.
I'm not sure what the USB cord was sent along for. Now that I found a way to power it up. The camera and monitor works as I was hoping. I'm able to see my trailer clearly behind my pickup "slide in" camper.
Lazer S.
10/14/2025
Glad it's working well for you, Tom! That USB-C cord should have also supplied power, so it's a little weird that it didn't. Would you prefer to be using that cord? I can see what we can do to get that remedied if you like.
by:
Jim
09/17/2026
The camera works exactly like I wanted. It helps keep an eye on my rear cargo rack and any traffic behind me. Thanks for the professional install too!
by:
Ellen
07/02/2026
I installed the camera and paired it with the monitor but it says not connected. I called Furrion and after being on hold for over 45 minutes I was told that it wont work with a chevy unless I purchase a 7 pin adapter. I have ordered the adapter but it wont arrive until 7/7 after the holiday. It would have been nice if E trailer had told me when purchasing the camera that I needed the adapter too.
by:
Mike
04/29/2026
I have a 2024 Chevrolet Silverado 3500HD and therefore needed the PWM filter. I had an installer put in the filter and the camera. The installer tested the camera functionality (not with my truck) and stated that it was fine. I tested it in my truck later with the cigarette lighter cable provided in the box. I don't have a cigarette lighter 12v socket in my truck so I used the Swift Hitch
AC to DC Adapter for Swift Hitch Wireless Camera System
Part Number: PP01 to plug into. This adapter has worked fine for my TST 507 monitor. Well, when I plugged the Vision S+ monitor into the adapter, which was plugged into the AC outlet in my truck, it totally threw the truck's Infotainment system for a loop! It was like a virus had taken over my electronics and was paging through all of the menus, even making changes to data in fields. Luckily nothing permanent was changed in the electronics, but it was rather upsetting to see this. I still don't know if it was the cigarette lighter cable included in the box or the Swift Hitch 12v adapter that caused this. So I switched out the cigarette lighter cable with a Type A to Type C USB cable, plugged it into a USB port in my truck, and everything worked fine. Camera works great, the picture is great, and there is no fooling around with my truck's Infotainment system and data. I reported this issue to etrailer who in turn reported to Lippert/Furrion, from whom I am still waiting to hear from. If they shed any new light and why this issue occurred, I will update my review later.
AC to DC Adapter for Swift Hitch Wireless Camera System
Part Number: PP01 to plug into. This adapter has worked fine for my TST 507 monitor. Well, when I plugged the Vision S+ monitor into the adapter, which was plugged into the AC outlet in my truck, it totally threw the truck's Infotainment system for a loop! It was like a virus had taken over my electronics and was paging through all of the menus, even making changes to data in fields. Luckily nothing permanent was changed in the electronics, but it was rather upsetting to see this. I still don't know if it was the cigarette lighter cable included in the box or the Swift Hitch 12v adapter that caused this. So I switched out the cigarette lighter cable with a Type A to Type C USB cable, plugged it into a USB port in my truck, and everything worked fine. Camera works great, the picture is great, and there is no fooling around with my truck's Infotainment system and data. I reported this issue to etrailer who in turn reported to Lippert/Furrion, from whom I am still waiting to hear from. If they shed any new light and why this issue occurred, I will update my review later.
by:
Michael
07/30/2026
I have tried similar knockoffs to Furrion with decent results but I always seemed to have issues with the cameras failing prematurely. While Furrion is a bit more expensive, I think the quality and dependability is worth the extra cost. Like the old saying goes, you get what you pay for.
by:
Kelley Joe
09/09/2026
Installed on my new GoLight Boulderback 14 toy hauler. Totally changed my towing experience. No more blind spot.
by:
Desiree R
07/22/2026
We are very pleased with our Furion S+ camera system. The Furion S was all that was available when we purchase originally and this upgrade was well worth the price. The monitor does not wash out in direct sun nor black out after dark. I advise any RV camper to purchase. Also etrailer once again had quick response to our questions and shipment was here in 4 days. We would give more stars on product and service if it were available.
by:
Gerald
08/23/2026
Matched up to the mounting bracket on the rv and once installed paired up with the pull trucks monitor. A little pricey
by:
Steven
07/28/2026
My RV is not equipped with the pre-wired system. How can I wire in the rear camera?
by:
Michael
05/15/2026
So full disclaimer. My trailer was already pre wired for a system from Furrion. Easy to install. Great picture. Once I figured out that my truck had to be running to provide power to the trailer for the camera to work it was easy. Key on engine off did not provide the necessary power. Set up the angle I wanted on the camera and good to go. Got to buy a SIM card for recording your trip. You can monitor all the time or use it for backing only.
by:
Steven
07/26/2026
Very good resolution screen. It was plug and play installation for my Imagine travel trailer.
by:
J
05/21/2026
Since my Travel Trailer was pre wired for Furrion, I paid the extra for a Furrion. Install was about 20 minutes, and that was taking my time, making sure I didn’t lose those mini screws. Powered everything up an worked like it was supposed too. Real world test next week.
by:
Jim
06/24/2025
Just received camera system, well packaged and received on time. Will continue with review after installed.
Jim
6/25/2026
Camera system has been working great, no issues. Using this system while pulling 36 foot toy hauler, provides a great rear view of approaching traffic and use of extended side mirrors eliminating blind spots on road.
James D.
6/25/2026
@Jim these are definitely a game changer when towing something like a 36' trailer. No blind spots and peace of mind for sure. Thanks for stopping by and we appreciate you choosing etrailer!
by:
Ray
09/15/2026
The huge screen makes a difference. Worth every penny! It freaks me out when I can’t use my rear view mirror and this helps me pull my trailer with some peace.
by:
Brian
07/08/2026
Since our camper was already pre wired with the camera mount, it was simple to install. The camera works great. I definitely recommend this camera.
by:
Don D.
03/27/2026
Has definitely made my trailer towing less stressful and backing up is a breeze. Really like being able to see behind the trailer when driving. Image quality is very good. Installation and configuration was a breeze. Connected everything and turned it on and it worked. Only issue I had was there were no mounting screws included - there was a the camera mounting screws and another set of 1/4" long screws which were too short to use for mounting. Fortunately my trailer was prewired and I was able to re-use the old screws.
Highly recommend having a backup camera/monitor.
Highly recommend having a backup camera/monitor.
by:
Steve
09/06/2026
Everything it was advertised to be. Very easy to install on our XLT Fifth Wheel toyhauler.
by:
Aj
08/15/2026
Service grom your company was Great. Especially appreciated the updates,tracking info, I had a question about the product that was promptly answered by knowledgable staff.
by:
Steven
04/28/2026
Used this to replace my Furrion Vision S with the small dim display. This is a much-improved product that can be simply plugged in to replace the Furrion S (which was functionally almost worthless) with no rewiring.
by:
Mark
10/10/2026
best customer service anywhere on anything.
by:
Lorimer P Scribner
03/20/2026
Video is not smooth... Very slow frame rate like rapid slide show. Contacted Furrion, sent a video showing the problem and was told it was normal.. Looked fine to them. A system I bought on Amazon previously for another RV for less than half the cost did not have this issue. It works, just not well.
by:
Doug
07/18/2026
our 2025 keystone had a camera but someone needed more than us so it was somewhat ready the imitation screws that came in the package were a joke so off to menards for the correct length and size hooked and work perfect
by:
David
06/10/2026
I am impressed with the clarity and image reception. Definitely be sure and buy the SD card that is needed once it’s purchased. The trailer had a great price and always have very good technical and product representation. Their representative are always helpful and knowledgeable.
25
171
true
Show More Reviews
See what our Experts say about this Furrion RV Camera System
- 2019 Jayco Whitehawk 26RK Camera Monitoring System RecommendationHey Dennis, thanks for reaching out! The Furrion Vision S+ system is what you're looking for as the rear camera will be plug and play like you're wanting. For a single rear camera, you need the Kit # FR57AD, but if you'd like to install a few more we have the 4-Camera Kit # FR74AD. This will require you to modify your trailer for the additional cameras, but depending on what you want out of an observation system it might be worth it. The cameras can be used during travel as well as when...
view full answer... - Does 2025 Chevy Silverado 2500HD Require Power Adapter for Install of Furrion Vision S+ SystemHey Mike, your 2025 Chevy Silverado 2500HD will have the power issue with the Furrion Vision S + # FR57AD that you have so you would need a solution like the part # VGR64VR that you referenced. Or if you don't want to mess with any wiring you could just use the plug-in style adapter part # FR87PR which does the same thing. You'd plug your 7-way into it and then plug it into your vehicle 7-way. But to answer your question the # VGR64VR would work on the thinner gauge wires that you have....
view full answer... - Can I Purchase Just the Furrion S Wireless Camera System Monitor By Itself? Hi Eric, It sounds like you have a Furrion S Wireless Back-Up Camera System like part # FCE48TASL-05, which has a back up camera and two side cameras with integrated LED lights. The Furrion S Wireless Systems are only compatible with Furrion Vision S monitors which we sell two sizes of. The 5" Replacement Furrion S Wireless Monitor part # FR97FR, will replace your monitor for Furrion S Wireless Camera Systems 732556 (FOS05TASF) and FCE48TASL-05. The 7" Replacement Furrion S Wireless...
view full answer... - How Do I Mount the Back Up Camera for the Furrion Vision S+? Hey Michael. The backup camera that comes with the Furrion Vision S+ System item # FR57AD has built in mounting holes in the casing. It comes with four #6 x 3/4" flat head self-tapping screws, four #4 x 1/4" self-tapping screws, sealant, and insulation tape to complete the installation. What tow vehicle are you using?
view full answer... - Does Furrion Vision S+ Have to Use Included Power Cable for MonitorHey Mike, it is important that you use the included power cable with the Furrion Vision S+ Wireless RV Backup System w/ 1 Camera # FR57AD like the instructions indicate. If this is like a hardwire install I would look for a cigarette lighter to 2-wire adapter so that you can wire it in and use the correct connector that will allow you to have the correct voltage for it.
view full answer... - Backup Camera for 2025 Forest River Rockwood Mini Lite 2205S*Updated From Below Hi Michael; I'm sure you're right, it is probably prepped for the Furrion. Since Furrion is phasing out the old Vision S, and parts won't be available soon, you want to get the new Furrion Vision S+ Wireless RV Backup System # FR57AD. If you want the system that comes with the side cameras as well that is the # FR64AD
view full answer... - Back Up Camera For an In Bed Camper Hey, Joe. That's a great question. Backup cameras and rearview, observation, cameras are essentially the same, the difference comes down to how they’re wired. With a system like the Furrion Vision S+ Wireless RV Backup System # FR57AD, it’s typically wired into the reverse light so it turns on when you shift into reverse. However, many people wire it to a constant 12V power source instead so it can be used as a rear observation camera while driving. The monitor will go into a “sleep”...
view full answer... - Troubleshooting Furrion Vision S that Screen Cuts in and OutHey Robert, I would check to see if something happened to the antenna on the camera if this is a new problem. It's possible it's not pointing up anymore and fixing that will get you back the reception you once had. Let me know if that helps either way. Do you have the Vision S system or the Vision S+?
view full answer... - Solution for Needing Replacement Furrion Vision S CameraHey Scotty, so unfortunately Furrion recently discontinued the Vision S system and replaced it with the Vision S + which uses all new components and is not backwards compatible. What that means is that we don't have a replacement camera alone for what you have as you most likely have the older system. So best solution would be the part # FR57AD for an all new Vision S + system. I know it's not ideal but is that something you'd be open to?
view full answer... - Furrion Camera Comaptibility With 2020 GMC Sierra 1500 Towing 2017 Coachmen Catalina Legacy 243RBSHey Mary! The 12V PWM Filter # VGR64VR will work with the Furrion camera and prevent any issues with the PWM from your 2020 Sierra. However, I do recommend getting the Furrion Vision S+ # FR57AD over the old Vision S. They use the same mount so this is still compatible with what you have on the travel trailer. The Vision S was discontinued, and most parts aren't available anymore if you need them. The new S+ is a significant upgrade in quality, and has other nice features like recording...
view full answer... - Availability of Mirror Mount and USB-A/USB-C Adapter for Furrion Vision S+Hi Richard; the Furrion Vision S+ Wireless RV Backup System # FR57AD does not come with a mount for your 2024 F-350 mirror. You can use the suction cup and mount it near your rear view mirror but there is no specific mount for it. The system actually includes two different cables. One is USB-C to 12V for the standard 12V socket. The other is USB-C to USB-A so you will be able to power it with a standard USB port in your F-350. What kind of trailer will you be installing the camera on?
view full answer... - How to Get Furrion Vision S+ to Work with Plug on 2017 Forest River Wildwood Ultra LiteHey Joe, thanks for reaching out! To get the camera from the Furrion Vision S+ Wireless RV Backup System, like part # FR57AD with 1 camera, to work, you'll need to remove the plug on your Forest River and install the plug that came with the camera. You might try cutting the plug off initially to see if there are just 2 wires that you can then splice to the plug that came with your kit, but that's about it. Let me know if you have any other questions!
view full answer... - Will Furrion Vision S+ Monitor Work With Vision S CamerasHey Brian! The Furrion S+ monitor like the one that came with your # FR57AD is not backwards compatible with Vision S cameras. If you're wanting to add side marker cameras or an extra camera it would have to be # FR84AD or # FR24AD from the Vision S+ system. What kind of trailer do you have?
view full answer... - Are Wireless RV Camera Systems ReliableHey Garth! The camera systems have come a long way in 10 years and they definitely work well and are reliable. I recommend the latest generation from Furrion, the Vision S+ # FR57AD. The Vision S+ gives you a real-time view using a 2.4 GHz signal and will avoid that signal interference you experienced in traffic in the past. This version comes with a 7" monitor and the main backup camera, a 5" monitor system # FR39DF is also available. If you want side marker cameras we also have the #...
view full answer... - Can Furrion Vision S+ Be Used As Rear View MirrorHey John! The Furrion Vision S+ # FR57AD does act as sort of a rear view mirror when you're towing or if you have an in bed camper, but it is not designed to replace the mirror on your vehicle. The camera stays on while you’re driving so you can monitor what’s behind your RV or trailer. The 7" monitor shows a live video feed from the rear camera, which helps reduce blind spots and lets you see traffic behind you when changing lanes or traveling down the highway. What are you towing...
view full answer... - Availability of Furrion Vision S + System with Two Rear CamerasHey Phil, while we don't have a single part number that includes two rear cameras and a 7 inch monitor what you would need is the part # FR57AD plus an additional rear camera part # FR24AD. You can have the monitor setup to show the two camera views simultaneously if you like. You can also have the monitor in any vehicle and if the cameras are in range it will all work.
view full answer... - Can Furrion Vision S/S+ Pair With 2025 Dodge Ram 1500 Tungsten Factory MonitorHey Clarence! That would be great but none of the trailer camera systems are going to pair with vehicle monitors/screens. All of them will require a separate monitor. The Furrion is a really nice system so I do recommend it. Since the Vision S is getting phased out you will want the Vision S+. Parts aren't backwards compatible and you wouldn't want to run into an issue if somehow you broke a camera and couldn't find a replacement for the Vision S. We have the following available: -Furrion...
view full answer... - Travel Trailer Camera for 2026 GMC Sierra 1500 Towing 2026 Brinkley I 280. Hey Doug, congratulations on the new truck and trailer! That is a nice setup for sure. Unfortunately, the backup cameras aren't going to integrate with your dash cam system. Since you're already prepped for Furrion, and it is the best on the market right now, I recommend using the Furrion Vision S+ # FR57AD. The camera will mount up to the shark fin on the back of your Brinkley for a simple installation. Then you will have the separate 7" monitor in the cab of your truck. If you want to...
view full answer... - Can I Add Two Side Marker Cameras To Furrion Vision S+ Camera System?Hello Paul, thanks for reaching out. Yes, you can add two side cameras to the Furrion Vision S+ camera system. For that you will need part # FR84AD. These cameras have plenty of signal strength, so even for a longer 4-horse living quarters trailer there will be no problems there.
view full answer... - Furion S Vision Plue Wireless Backup Camera Blue light Not Receiving SignalThanks for reaching out Randy, With the Furrion Vision S+ # FR57AD showing a blue light on the sharkfin camera indicates the camera is getting power but the monitor is not receiving video signal. From what you've described it sound like either the camera lost pairing or no wireless signal. A few things we recommend checking: 1. Confirm the camera is still receiving a steady 12V power source while the vehicle/running lights are on. 2. Try completely powering down both the monitor and...
view full answer... - What is Size of Mounting Ball on Furrion Vision S MonitorHey Tandra, we haven't tested the Furrion Vision S + systems like the part # FR57AD on a Bulletproof mount system at this time but I can tell you that the diameter of the ball is 5/8 inch. Is that the correct size for that system?
view full answer... - Are the Furrion Vision S Side Marker Cameras Compatible w/ the Furrion Vision S+ Monitor? Hey Mark. The Vision S+ cameras and monitors like the Furrion item # FR57AD are not compatible with the older Vision S cameras. You'll need to install the Furrion Vision S+ Wireless RV Observation Cameras w/ LED Marker Lights item # FR84AD to upgrade your side marker lights. What kind of trailer do you have? You can add this information, along with any other questions you have, where it says Add Comment.
view full answer... - Backup Camera for 2022 Ram 3500 With Tailgate RemovedHi Sam; is there another connection in the vicinity of the one from your picture? The Brandmotion Tailgate Delete Backup Camera # BM22FR is designed to be used without the tailgate. See the attached photo with the connector. It isn't super clear but it looks like the connector you sent a picture of is in the background behind the camera connection. I can tell this wiring harness won't fit either of the connectors from your photo. Let me know what you find.
view full answer... - How To Power Furrion Vision S In Chevy Silverado 2500 With No 12V OutletHi Kyle; we don't carry an adapters but what you can do is install the Roadmaster 12 Volt Outlet Kit, 20 amps # RM-9332. This ensures constant, reliable power for the camera system. It gets harder and harder to trust those adapters as random companies continue to push them out with less than desirable quality.
view full answer...
Do you have a question about this RV Camera System?
Used Items Available
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Dustin K
Video Edited:
Jonathan Y
Video Edited:
John S
Installed by:
Steven C
Written by:
Mary K
Updated by:
Wilson B
Updated by:
Michael B
Edited by:
Amanda M
Test Fit:
Kevin C
Test Fit:
Jesse B
Video by:
Thomas T
Video by:
Ethan H
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Heather A.
5/1/2026
That’s a really clean install, nice call using the center running light location. Sounds like this is going to be a big help on those solo trips too. Having that rear view when you’re backing into tighter campsites takes a lot of the guesswork out, especially without a spotter. What states are you traveling to this summer?