Bolt Pattern On etrailer Sidewind Trailer Jack

Question

Question:

What is the bolt pattern of Part Number: e38AV? I’d like to verify fitment on my enclosed trailer.

asked by: James M

0

Expert Reply:

Hey James! The etrailer Sidewind Trailer Jack # e38AV uses the standard 3-bolt A-frame mounting pattern, which is 3" apart on center. The mounting holes are also elongated, so there is a little wiggle room if the holes on your enclosed trailer aren't exactly 3" apart.

The etrailer Sidewind Trailer Jack is also available with a tongue weight scale # e63KV if you want that option. This version doesn't have the SnapPad, but you can add it separately with # SN47FR

What kind of enclosed trailer do you have?

expert reply by: Robin H

0

etrailer Sidewind Trailer Jack
(click to enlarge)

Steve

8/23/2026

Awesome trailer jack Quality built, best one I’ve had on my trailers in the last 20 years

Robin H.

8/24/2026

@Steve glad to hear it! That's high praise after 20 years of owning trailers. Thanks for taking the time to leave some feedback!

Answer 1

Hey Donny, welcome back! As of right now, the BTBRV Trailer Jack Foot Scale #BTBRV014 is the only version we have available on its own. As you saw, we have an etrailer version that is available with some of our trailer jacks like #e63KV, #e83KV, and…

view full answer...

Answer 2

Hey Tris. I attached a diagram below that will show you the dimensions of the etrailer Manual Sidewind Trailer Jack w/ Drill Adapter item #e88GV. From the mounting plate to the bottom of the jack foot is 9-1/8". The etrailer Manual Sidewind…

view full answer...

Answer 3

Hi Edie; we haven't had any specific reports on whether or not the tailgate can sit open when hooked up to a trailer with the #LC733926 installed. To some extent this will depend on the ball mount you're using since that determines the height…

view full answer...

Answer 4

The Global Link Vise Lock for Cam-Action Door Latch part #295-000024 will be a direct replacement for the vise lock you have on your trailer now. That said, it can only be ordered keyed alike which means if you order multiple and select this option…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Tom, great question! Both products provide an easy way to measure tongue weight, but they excel in different situations. The BTBRV Trailer Jack Foot Scale #BTBRV014 measures tongue weight at the trailer jack, so you don't need to position a…

view full answer...

Answer 7

Hey Ben, the deciding factor is really where your current jack mounts and whether you want it to stay in that same location. If your enclosed trailer already has a standard A-frame jack opening and you’re happy with the jack staying in the center,…

view full answer...

Answer 8

It sure is Steve and welcome back! The etrailer Sidewind Trailer Jack w/ Drill Adapter item #e88GV is the correct jack if you don't want the SnapPad. This one is designed to fit the standard bolt pattern of an A-Frame trailer coupler and can be…

view full answer...

Answer 9

Hey Brian! The BTBRV Trailer Jack Foot Scale #BTBRV014 is not designed to live on your trailer jack permanently. If you're traveling or storing your trailer you definitely want to remove it and replace it with your standard foot. If you're at…

view full answer...

Answer 10

Hey Jim, you can do both ways with the part #BTBRV014 if you like but it really comes down to what you are wanting the tongue weight info for. If you want to know your tongue weight without WD system hooked up then do it without the system hooked up.…

view full answer...

Bolt Pattern On etrailer Sidewind Trailer Jack

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching