bing tracking image
  1. RV Camera System
  2. Furrion
  3. Backup Camera
  4. Observation Camera
  5. 7 Inch Display
  6. Wireless Signal
Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras - 7"

Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras - 7"

Item # FR98NR
Our Price: $878.10
RV Camera System
This item qualifies for Free Shipping
Shipping Weight: 4 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Product Expert Kathleen M

Is this right for you? Product Expert Kathleen M says:

Yes, if you:

  • Feel nervous changing lanes because your RV has such big blind spots
  • Have plenty of room for a large screen on your dash and want to see all the cameras at once
  • Prefer the from-the-factory look of a backup camera built into your third brake light

No, if you:

  • Haul an Airstream or toy hauler, which can cause interference with wireless systems
  • Often power wash your rig and need a camera with a better seal
Wireless backup camera system has 3 LED waterproof cameras with night vision - 1 third brake light camera and 2 side marker light cameras that can wire to your turn signals. Touch screen, anti-glare monitor displays up to 4 cameras. Lowest Prices for the best rv camera system from Furrion. Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras - 7" part number FR98NR can be ordered online at etrailer.com or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (578)
  • Q & A (0)
  • Photos
  • Why etrailer?

Furrion RV Camera System - FR98NR

  • Backup Camera
  • Observation Camera
  • 7 Inch Display
  • Wireless Signal
  • Furrion
  • Anti-Glare
  • Built-In Microphone
  • Mirrored Image
  • Motion Detecting
  • Night Vision
  • Touch Screen
  • Waterproof
  • Dashboard Pedestal Mount
  • Suction Cup Mount
  • Below Rear Clearance
  • Side Marker Lights
  • 120 Degrees
  • 3 Cameras

Wireless backup camera system has 3 LED waterproof cameras with night vision - 1 third brake light camera and 2 side marker light cameras that can wire to your turn signals. Touch screen, anti-glare monitor displays up to 4 cameras.


Features:

  • Marker light cameras replace your clearance lights and 3rd brake light to improve visibility and obstacle detection for your RV or camper
    • Minimize blind spots on both sides and the rear of your RV and help prevent accidents
  • DOT- approved, waterproof marker lights with detachable cover allow easy access to replace your LED bulb
  • CMOS sensors create high-quality digital video in full color
  • Gives you a 65-degree viewing angle
  • Motion detection triggers monitor (sold separately) to power on
  • 12 Infrared LED lights on the side camera's housing provide night-time vision up to 39'
    • Integrated IR cut filter blocks infrared light during the day to capture natural-looking images
  • Durable, metal construction is dust resistant and waterproof
    • IP65-rated to protect against dust and low-pressure water jet spray
  • Wireless backup camera system improves rear-view visibility and obstacle detection for your RV or camper
    • Minimizes blind spots and helps prevent accidents
  • Rear clearance light camera with CMOS sensor creates high-quality digital video in full color
    • Gives you a 120-degree viewing angle
    • Features a built-in microphone to pick up audio
  • Motion detection triggers monitor to power on
    • LCD auto-off setting lets you set your monitor to power off after 10, 20, or 30 seconds
  • 8 Infrared LED lights surround the camera lens to provide night-time vision up to 16'
    • Integrated IR cut filter blocks infrared light during the day to capture natural-looking images
  • 7" Full-color LCD touch screen monitor shows a mirrored image for a precise view from the driver's perspective
    • Auto-dimming, anti-glare screen let you view the display in any lighting
    • Rear assist marker lines show distance from other objects
    • Brightness, color, contrast, and image orientation can be easily adjusted
    • Speaker projects audio sent from your camera
  • Quad screen displays up to 4 camera angles simultaneously
  • Built-in digital transmitter eliminates interference from other devices
    • Offers high-quality, uninterrupted video up to 492' away
  • 2 Different mounting options allow you to display the monitor
    • Tabletop mount designed with 4 non-slip pads to sit on your dashboard
    • Suction cup mount secures to your windshield or dashboard
  • Durable, metal construction is dust resistant and waterproof
    • IP65-rated to protect against dust and low-pressure water jet spray
  • Simple installation - minimal drilling required
    • Mounting hardware included
  • System can be used as a backup camera or for observation
    • Wire to reverse lights for backup camera
    • Wire to running lights for observation
    • Includes trigger wire to connect side cameras to turn signals


Specs:

  • Side camera overall dimensions: 5-1/2" wide x 3-1/4" tall x 1-5/8" deep
  • Mounting hole spacing:
    • Vertically (left side): 1-1/8" center to center
    • Vertically (right side): 5/8" center to center
    • Diagonally: 3-1/8" center to center
  • Resolution: 720 x 480
  • Voltage: 12V - 24V DC
  • Wire length: 7-1/2"
  • Monitor dimensions: 7-7/16" wide x 4-15/16" tall x 1-3/16" deep
  • Screen size: 7"
  • Camera dimensions: 6-5/8" wide x 2-9/16" tall x 2-5/8" deep
    • Mounting hole spacing:
      • Horizontally: 3-3/4" center to center
      • Vertically: 15/16" center to center
  • Tabletop mount dimensions: 3-5/16" wide x 3-1/4" tall x 4-5/8" deep
  • Suction cup mount dimensions: 2-1/8" diameter x 3-1/8" tall
  • Resolution:
    • Monitor: 480 x 272
    • Camera: 720 x 480
  • Wireless range: 492'
  • Voltage: 12V - 24V DC
  • Camera cable length: 6'
  • 1-Year warranty


Note: Will not work on 2016 and newer Mercedes Benz Sprinter or GM trucks that have PWM wiring.



2021123890 Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras - 7"

Replaces FOS07TAEM





Customer Satisfaction Score:


Customer Reviews

Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras - 7" - FR98NR

Average Customer Rating:  4.7 out of 5 stars   (578 Customer Reviews)

Wireless backup camera system has 3 LED waterproof cameras with night vision - 1 third brake light camera and 2 side marker light cameras that can wire to your turn signals. Touch screen, anti-glare monitor displays up to 4 cameras.

by:

I have a 2020 Grand Design momentum toy hauler.. The side cameras hoioke up very easily.. The rear I had to remove the security camera mount and drill new holes to mount rear camera and light.. Not terrible.. The screen has room for a 4th sec camera and not sure why it wouldnt be included in this kit.. Havent used it other than hook up but nice to see behing you..




by:

As I have yet to install the camera set this review is geared more towards etrailer. First great site where products are easy to find. Super customer service. High tech folks who actually help. Videos for product information and installation. And a host of folks that research so you don't have too. Great prices and fast shipping. Only downfall no accounts to save later purchases in. OH Well! I guess I will have to suffer. :)




by:

Wow makes driving and backing a lot safer. I love the extra protection to see what is happening outside while we’re camping.




by:




by:




by:




by:

Review from a similar Vision S Wireless in RV Camera System


The installation was fairly easy. The trailer came prepped for the rear camera so, it was attached and linked. The side cameras involved a little work due to being close to the pass-through doors. They went on with a bit of cutting of the trailer skin.

The problem is the right side trailer camera is reading that it's the left side and visa versa for the right. They are both installed correctly, facing back and the pairing button on the bottom.

Also when the two side cameras paired they caused the rear camera to unpair. I re-paired the rear and now the right side ( left camera ) is unpaired.

I've emailed Furrion for answers to my situation.


Comments
I dont use the side cameras as much as I thought I would. it does work nicely.
John - 04/10/2022


by:

Review from a similar Vision S Wireless in RV Camera System


they work fairly well I have them hook up to the signal lights so they come on with the signal light (diodes are required)also have them on a constant power(signal only) so I can turn them on at any time(like when parking)the only thing is they should (build or supply an extension block to go passed the awning brackets.I made one to look passed the awning but I still have to modify the angle as I build it straight so it left me with a blind spot in the right far corner.but you can pick it up in your mirror. In photo one the awning is out but you can see where the awning bracket will come down and block the view if I didn't make the spacer.




by:

Review from a similar Vision S Wireless in RV Camera System


I love this camera! It is so much better than I originally thought it would be. I use it for my rearview mirror when traveling, I can see who is behind my Camper and I don't have to use the add on mirrors on my tow vehicle anymore because I can see now with the backup camera in the rear blind spot and the rest with my tow vehicles mirrors. I also can now back my travel trailer into the campsites without my wifes help and do that with only one try. It has been such a nice experience using this camera system.


Comments
I still love it! It is still awesome, I would not want to go camping without it. It has made my camping experience so much more pleasurable. If you don’t have one of these I highly recommend you get one .
Randy - 10/15/2022


by:

Review from a similar Vision S Wireless in RV Camera System


Thanks for the fast service.
I received
the backup camera and installed it in minutes. My camper was prepped at the factory, so the installation was easy.


Comments
It works great. I use it for rear view while towing.
Teddy - 11/12/2022


by:

Review from a similar Vision S Wireless in RV Camera System


Excelente producto, facil de instalar y envio seguro y rapido, no requieres un técnico, lo puedes hacer tu mismo con poca herramienta, 2 horas en instalacion.

(Excellent product, easy to install and safe and fast shipping, you do not require a technician, you can do it yourself with a few tools, 2 hours to install.)




by:

Review from a similar Vision S Wireless in RV Camera System


Haven’t had long but I really like it, bought this to go on my enclosed trailer because I go into areas that I need to turn around which requires backing up and some are really tight and the way I turn I can’t see what is behind me, this helps alot


Comments
After having this for a year i am glad i got it, its like having a second person to guide me backing up, i really like the motion sensing and all, I definitely feel more confident maneuvering around in tight areas and backing up to my house
James - 09/12/2021


by:

Review from a similar Vision S Wireless in RV Camera System


Have not been out on the road yet but the install was easy even for a novice like me. My reflection 5th wheel was prewired so it was a plug and play for the rear camera. For the side cameras I used the two screws from the previous light. I put both screws in the top holes, (one behind the camera) as that seemed to secure it better then bothe screws not behind the camera. Instructions were a bit limited(or I didn't read them) on the side camera sync but I pressed enough buttons to figure it out. Picture looks great. Do watch for obstructions such as awning supports which will limit view. I also used silicone to keep the water out.


Comments
I find that i use the rear camera much more than the side cameras so i question whether i would have bought the side cameras again. The rear camera would cut in and out on the highway so I added a longer antenna and you have to make sure both antennas are straight up and down to get the best signal. All in all i get a good view behind the 35ft trailer and would buy the rear again.
Pete - 03/26/2021


by:

Review from a similar Vision S Wireless in RV Camera System


Installed on GD Imagine '22 2600RB and '15 Chevy 1500 Silverado double cab LTZ. Took about 15 min to install with pre-wired prep kit on RV. Got 5" monitor to keep from being too big on dash/windshield. Monitor is on windshield with suction mount right below rear view mirror and works great even with antenna folded down, very easy to pop off and put in console when not in use. You can also just rest monitor in the console next to power plugs, etc. Did not get the side cameras due to other reviews that they aren't really necessary, definitely agree not needed. The rear view however is a must-have if backing anywhere without a spotter. I can back out of my neighborhood driveway with somewhat limited sight and see everything in both directions Based on many internet reviews of other camera systems, glad I went with this: it was super easy to install and provides the basic purpose of backing up safely. I have no need to record or watch it continuously while driving, although it seems to work just fine while driving and not cut in/out as other reviewers have described after a couple hour round trip. Maybe higher definition systems out there with better features, but this unit has great quality and vision is very acceptable for the purpose it was designed, to assist in backing up. Simple, easy install, great value, just works!




by:

Review from a similar Vision S Wireless in RV Camera System


Product arrived sooner than originally estimated & w/o any damage. Installation took only minutes to compete & to have a functioning unit.
Installed on the rear of a 35' travel trailer.
Will be used used for the first time in the next week.
Will provide additional details after we have a chance to shake it down.


Comments
It has meet expectations & provided an addition measure of safety & awareness behind the travel trailer as many drivers like to draft or get to close before passing. Only drawback is the monitor is not glare free and at times difficult to view if not at the proper angle.
Sudden S - 10/22/2022


by:

Review from a similar Vision S Wireless in RV Camera System


The cameras work great. The set up wasn't as easy because Forest River has the plug and play set to the back up lights. So if you do their install the camera will only work when you are backing up. Not what we wanted. A quick google search found someone with a Forest River/Surveyor trailer who gave the instructions to hook it up to your clearance lights. So that's what we did.


Comments
Weve had this a year and still give it a 5 star. It makes backing up, driving down the freeway and roads so much less stressful. we can see everything behind us. Like others we dont use the side cameras as much but having the option is great.
DianeB - 07/28/2022


by:

Review from a similar Vision S Wireless in RV Camera System


The rear camera works as one would expect. However, the monitor is not as clear as my old Voyager and the build is less then the Voyager. Once the monitor was mounted on the Ram mount I have on the RV dash the monitor started to make a rattle noise which is coming from inside the monitor. Currently doing the research for a better monitor.




by:

Review from a similar Vision S Wireless in RV Camera System


This camera is a bit pricey, but it's worth it. Set up was super easy for our Flagstaff 26RBWS trailer, which is pre-wired for Furrion cameras. The entire installation took only 10 minutes or so -- just replace the existing camera plate with the camera, plug it in, and plus in the monitor. It connected automatically, and works great. Just remember to turn on your lights, because the camera is powered by the trailer light circuit.




by:

Review from a similar Vision S Wireless in RV Camera System


Everything works great as advertised. We’ve been 1 year on the road from PA to FLORIDA to Wyoming and back to PA.
My one wish is that the 3 view screen would stay on the monitor as needed. (unless I missed that in set up)


Comments
I reached out to Furrion who did provide a possible solution. You will want to use the camera menu to access the LCD setting and turn it off. You will also want to make sure that the motion feature is also off. While in settings there will be a view all setting and you will want to choose the view that you will like.
-- Etrailer Expert Jenny N - 06/07/2022


by:

Review from a similar Vision S Wireless in RV Camera System


This camera set up is a great addition to our Rv. However it’s not quite as advertised. Our 2022 RV that we just purchased came pre wired for these specific cameras but it is not wired for the whole security set up and the cameras can only be seen on the monitor when the running lights are on the Rv are on which only come on when hooked up to the truck and are on on the truck. The “trigger” for the side cameras would be the directional also not wired in on the marker lights on the RV thus a waste of money for the side cameras and security monitoring. Without the directional trigger while driving, only the back up camera is viewed on the monitor.Also there is no power supply for the monitor for in the RV. Great technology but falls short for plug and play.


Comments
When mounted in the cab, the monitor typically works as an observation system together with a Furrion rear mounted camera to see the back, and two side cameras, for traffic observation. When mounted in the coach, the monitor typically works as a security system together with a Furrion doorway camera. In order to keep the cameras on when not hooked up to your truck you will need to wire it by running a power wire to each camera then connecting them to a switch like item # 37212225
Single Rocker Switch - On/Off - Black
$12.50
. The switch will go directly to the battery in your trailer. You will need to turn the switch on while towing too, or the cameras will not be on. You should also add a 12V outlet in your trailer for the monitor to plug into when you are in the trailer like item # 37215105
12V Power Outlet for RVs - 1-7/16" Diameter - Hardwire - Plastic
$13.86
.
-- Etrailer Expert Sierra K - 12/30/2021


by:

Review from a similar Vision S Wireless in RV Camera System


We are not new to pulling a trailer. I resisted my spouse wanting to get this system as I am quite comfortable in all sorts of traffic and can back up with the best of them. She would not give up and ordered a system. Our 2012 Ibex 19QBS came pre-wired with the dock already installed at the back of the camper. Installation could not have easier. The instructions are concise and clear. The components are well made. Off we went thinking this is a good way to not back into anything. Yes, that is true, but the bigger value to me is pointing the camera further back down the road to keep an eye on what is approaching. It is a valuable addition to decision making on passing traffic and lane changes. My only issue is I need some sort of glare protection on the monitor to make it easier to see in bright light. We are well satisfied with this product. As expected, e-trailer was easy to work with and meet their commitments.




by:

Review from a similar Vision S Wireless in RV Camera System


It’s a decent system with a good picture, while parked or slowly moving (backing up). The refresh rate is so horrible that it loses picture/signal constantly while driving. This is not a rear observation camera, it is solely a back-up camera! Do not purchase if you are looking for a true rear observation camera to use while driving and for back up assistance.




by:

Review from a similar Vision S Wireless in RV Camera System


Love this camera! It makes it easier to change lanes and back up. My Jayco was pre wired so installation was very easy. The first time I used it I had to remember that the lights had to be on to power the camera because of the pre wire. Much safer to change lanes now. I can see what’s behind me now.




by:

Review from a similar Vision S Wireless in RV Camera System


We received our Furrion Observation Camera, FOS43TASF, quickly as advertised. Our camera arrived with no damage. Installation was fast and easy on our 2018, Grand Design, Imagine, 2600RB, plug and play with the existing mount. It took maybe 20 - 30 minutes at the most to install, pair and make minor adjustments. The camera and viewer paired immediately when power was turned on. The camera turned on when the trailer parking lights were turned on. Positioned the camera so the spare tire could be seen on the observation screen to give a point of reference to the back of the camper. Received a strong signal on the pairing. We haven't driven the camper on the road yet to give a review on the workings of the the unit but, don't expect any problems. Should be a good safety feature to know what is behind us when towing. Very happy with our purchase and would recommend this product. This product from etrailer was the least expensive price I could find while researching price points. Thank you etrailer.




by:

Review from a similar Vision S Wireless in RV Camera System


We purchased the Furrion FOS43TASF to use as an observation camera while towing our new 2018 26' Jayco Jay Flight travel trailer. Our Jayco came equipped with a pre-wired mount for the Furrion camera. The pre-wired black female cord for the camera was present but someone at the factory forgot to wire it to power, so when I plugged in the camera, there was no juice... I removed the center clearance light on the back of the trailer, used the supplied power cord and to feed in/splice in from the clearance light. Installation only took about 15 minutes. We already made our first trip this season and the camera worked wonderful. Great picture, no delays, very happy being able to see what's in the back and coming along the sides. We didn't use the monitor mount supplied with the Furrion, instead we used a vent phone mount I had for my phone that worked perfectly. This is our second and the best observation camera for towing a trailer we've experienced. The first one was another brand on different travel trailer we just sold. Our experience with that camera was poor picture quality, delays and blackouts. We definitely would recommend the Furrion FOS43TASF.



25
578
Show More Reviews

See what our Experts say about this Furrion RV Camera System

  • Will Bluetooth Connection In Truck Interfere With Furrion Vision S Wireless RV Observation System
    The Furrion Vision S Wireless RV Observation Camera System w/ 3 Marker Light Cameras part # FR98NR is not affected by blue tooth because they have a wireless connection between the camera transmitter and the monitor receiver but they do not utilize Bluetooth at all. They basically have their own wireless connection and use their own separate monitor so the camera is not compatible with any existing screens in the vehicle unless they are Furrion. They also do not require WiFi connection to work.
    view full answer...
  • Can I Mount Two Furrion Cameras on the Back of my RV?
    When using the Furrion Vision S Wireless RV Observation Camera System w/ 3 Marker Light Cameras - 7" Screen part # FR98NR you do have adjust ability in both the red marker light camera and the shark fin camera. I was able to confirm this with Furrion. The red marker light camera would best used as the camera that looks down towards the bumper and the shark fin camera would be mounted on the roof at the rear edge and would act as you rear viewing camera. The system has really good field...
    view full answer...
  • Will Furrion Vision S Wireless RV Observation Camera System Fit 2016 DRV FullHouse LX455
    Yes, the Furrion Vision S Wireless RV Observation Camera System w/ 3 Marker Light Cameras # FR98NR that you referenced will work great on your 2016 DRV FullHouse LX455 that currently has side marker lights that are round. This would replace them easily and would give you the side cameras that would be very helpful for a fifth wheel trailer that's as long as yours.
    view full answer...
  • Furrion Vision S 3rd Brake Light or Clearance Light Camera
    The Furrion Vision S Wireless RV Observation Camera System w/ 3 Marker Light Cameras - 7" Screen # FR98NR has the red light with camera that serves as both a marker light and 3rd brake light for your RV. You don't need to use it as a brake light, but you do need the clearance light function because that is what gives the camera the power it needs.
    view full answer...
  • Where Should the Rear Camera Be Placed On a Trailer At the Top
    The best location to install a camera on the back of the trailer is in place of the center marker light at the top. That said, removing the center light completely can be a violation of local state law. The best option we have with this in mind is the Furrion Vision S Wireless RV Observation Camera System part # FR98NR as the center camera is integrated in a mounting bracket which also houses the marker light. Furthermore, there are two traffic cameras which help reduce blind spots when...
    view full answer...
  • Will Furrion Vision S Camera System FR94FR Fit 2019 Grand Design Solitude 2930RL?
    The Furrion Vision S Wireless RV Observation Camera System w/ 3 Marker Light Cameras - 7" Screen # FR98NR will work with your 2019 Grand Design Solitude 2930RL and will replace your current marker lights. You will just need to wire the cameras in the # FR98NR to the running light circuit of your camper, and will give you an excellent view of what is going on around you when you are on the road and the 7" monitor is great for being able to see each camera view clearly. I included a video...
    view full answer...
  • Furrion Vision S LED RV Back Up Camera System Wiring Instructions
    You have the newer LED version of the Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras # FR98NR which has four wires instead of the old three wire system. If you're replacing a running light you will wire the power wire on the camper to the red and brown wire on the camera, if the camera will replace a turn signal you will need to wire the power wire to the red and yellow wire on the camera and in both instances you would wire the black wire from the...
    view full answer...
    Image 1 for
  • Could Furrion Vision S Install on 2015 Forest River Signature Ultra Light
    Yes the Furrion Vision S Observation system part # FR98NR would work great on your 2015 Forest River Signature Ultra Light fifth wheel camper. This kit can basically install on any camper and would do so very easily due to it's universal design. For more info on this kit check out the review video I attached.
    view full answer...
  • Is The Furrion Vision S RV Camera System # FR98NR The Same As The FOS07TAED
    Yes, the Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras - 7" # FR98NR and FOS07TAED are the same thing, we just use a different item number on our site than Furrion.
    view full answer...
  • Will The Furrion Vision S System Show The Side Observation Cameras When Using The Blinker
    Great question, I did some research into the Furrion Vision S. **Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras - 7" # FR98NR. You need not worry about getting any kind of upgrade or anything new to get this feature, it comes standard. Just follow the install instructions to complete the set up.
    view full answer...
  • Can Furrion Vision S System be Used on Toy Hauler
    I am not really sure why there would be a note stating that the Furrion Vision S systems like the part # FR98NR wouldn't work well on a toy hauler but it definitely would. This kit has the best reception of all of the kits out there and is overall very reliable so I would feel very confident recommending it for you.
    view full answer...
  • Can The Furrion Vision S RV Cameras Be Mounted Anywhere?
    You can mount the Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras # FR98NR anywhere you'd like, so if you wanted to mount it lower or higher on your 2020 Keystone Passport you absolutely can. In the installation video attached, you can see at 13:07 our tech chooses a location to mount this camera since the shown motorhome didn't have a side marker light. I would just recommend that you do not mount the camera anywhere that'd interfere with any moving...
    view full answer...
    Image 1 for
  • Can Furrion Vision S Wireless RV Observation Camera System Side Cameras Orientate Vertically
    The side cameras of the Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras # FR98NR are not able to be orientated vertically as they are not able be removed and repositioned.
    view full answer...
  • Can Furrion Side Marker Cameras be Mounted Vertically
    There is not a vertical-mount option for the side cameras of the Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras - 7" # FR98NR. The reason for that is the camera can't be rotated, and while the monitor allows you to rotate the image, it rotates it 180 degrees instead of 90 degrees. So you would have to drill new holes to mount the # FR98NR.
    view full answer...
  • Recommended Replacement Observation Camera System For A 2021 Forest River Sunseeker MH
    The side marker cameras on the Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras # FR98NR is definitively the best observation system on the market, and the best that we have as well. Also, you are correct the yellow lensed cameras are the side marker cameras. Additionally, these will work just fine with your existing system, the color of the lenses don't have an impact on compatibility either. As far as displaying one camera with three connected, you...
    view full answer...
  • Can Furrion Vision S RV Observation System be Powered from RV Battery
    The Furrion Vision S systems like the part # FR98NR that you referenced are normally installed like you have it with the running lights being the activation circuit since it's very convenient and easy to use and not accidentally leave on. If you wanted to use the trailer battery power circuit as the activation circuit you certainly could but it would be a matter of running the power wire of the camera to it instead of the running lights. You'd want to use a switch too so that you'd be...
    view full answer...
  • Back Up Camera System For A 2018 Grand Design Imagine Travel Trailer
    The best option that we will have for you is The Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras # FR98NR.Though the camera resolution is still only 720 x 480 it has a wireless range of 492 foot. The Marker light cameras replace your clearance lights and 3rd brake light to improve visibility and obstacle detection for your RV or camper. The cameras have a simple installation with minimal drilling required. The system can be used as a backup camera or...
    view full answer...
  • What Type of Bulb Does Furrion Side Camera Kit Use
    The bulb type that the Furrion Side Camera kit part # FR98NR uses is a 194 so for LEDs you'd want the part # ARC78FR.
    view full answer...
  • Full Camera System Replacement For A 2018 Monaco Coach Marquis
    I did some research in regards to the OEM cameras, and I wasn't able to find anything for a 2018, but I was able to find something for a 2019 oddly enough. According to the owner's manual, the 2019 Marquis was equipped with a Magnadyne MobileVision monitor and cameras. We unfortunately, do not carry replacements for these monitors/cameras, my only option would be to replace the entire system with the Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras...
    view full answer...
  • Recommended Wiring and Camera for 2007 Airstream Travel Trailer
    The prewired observation systems tap into that same circuit so that isn't an issue. I don't believe that the 2007 Airstream travel trailers had any prewired options. That model year is before that was common practice. I recommend tapping into that clearance light circuit and using the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen # FOS05TASF. If you want extra cameras you can use the Furrion Vision S Wireless RV Observation Camera System w/...
    view full answer...
  • Best Backup Camera System for my 2021 Grand Design Imagine.
    We have several options that will work on your 2021 Grand Design Imagine 2400BH. A couple of the most popular are the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision part # FOS07TASF which will attach to the pre wired connection on the top rear of your camper. This will give you a 7" screen to see where your heading as you back up. Another very popular option is a complete observation system while you travel. The Furrion Vision S Wireless RV Observation Camera System...
    view full answer...
  • How to Correct Furrion Cameras Paired to Wrong Sides of RV
    The good news is that getting your system paired correctly is fairly easy! On the bottom of either side camera with the Furrion system # FR98NR you will see a button that you can press and hold for 15 seconds to disconnect the camera signal from the monitor. Once this is done for both side cameras then you can follow the instructions in the attached photos from the manual about how to pair each camera.
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Best Back Up Camera for 2020 XLR Nitro 28dk5 Forest River
    The best observation system for your 2020 XLR Nitro 28dk5 Forest River would be the Furrion Vision S system part # FR98NR which comes with a larger 7 inch display plus 3 additional cameras for the RV so that you can see all around it. Or for something similar we have the 5 inch screen version part # FOS05TASF which comes with a single camera. I really like the Furrion setups the best as they offer the best reception and consistency.
    view full answer...
  • How Can I Tell If My 2022 Cruiser Twilight TWS2400 Is Prepped For A Backup Camera
    Let me help you out with that question. **Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen # FOS05TASF. *Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras - 7" # FR98NR. If you already own the RV you can go to the back of the unit and look up and the middle of the top section. If it is prewired it will have a plate and mounting bracket that will tell you what brand is prewired, see linked photo. If you do not...
    view full answer...
    Image 1 for


< Previous
12



Do you have a question about this RV Camera System?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv camera system information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Kathleen M
Updated by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Edited by:
Amanda M
Employee Jonathan Y
Video by:
Jonathan Y
Employee Adam E
Video by:
Adam E
Employee David F
Test Fit:
David F
Employee Adam Y
Written by:
Adam Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.