Will Furrion Vision S+ Wireless RV Backup System Fit Old Furrion Vision S Trailer Prep

Question

Question:

I have a Vision S on my travel trailer right now and I need to replace it. My trailer was pre-wired for Furrion before. Will the Vision S+ fit the same mount and plug right in?

asked by: Luke

0

Expert Reply:

Hey Luke! What kind of trailer do you have? Yes, the Furrion Vision S+ Wireless RV Backup System # FR57AD will fit where the old Vision S was. They use the same mounting bracket and wiring so it should be an easy swap. The only thing that isn't compatible is the components of the system. The Vision S+ cameras only work with the Vision S+ monitor and vice versa.

expert reply by: Robin H

0

Furrion Vision S+ Wireless RV Backup System
(click to enlarge)

Answer 1

Hey Alfredo! Great question. The Furrion Vision S+ Wireless RV Observation System #FR57AD, #FR74AD, and #FR64AD are all capable of recording. The 7" monitor has a micro-SD card slot (must be at least Class 10) and supports cards up to 128GB.…

view full answer...

Answer 2

Hey Luke! What kind of trailer do you have? Yes, the Furrion Vision S+ Wireless RV Backup System #FR57AD will fit where the old Vision S was. They use the same mounting bracket and wiring so it should be an easy swap. The only thing that isn't…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Hello Ken, thanks for reaching out. Sadly, the Furrion Vision S camera system is being discontinued and replaced with the Vision S+. The camera for the Vision S+ is not backwards compatible with the Vision S system, so sadly if your camera is bad,…

view full answer...

Answer 5

Hey William, the best option we have that covers everything you need is the Hollywood Racks RV Rider part #HLY64FR. This rack was reinforced for heavier bikes at the rear of 5th wheel trailers where the ride quality is notoriously rougher than on…

view full answer...

Answer 6

Hey Jack, If you're talking about a transition plate then you'll want the etrailer Enclosed Trailer Transition Plate #e32JR. This can be installed on either end of the ramp to help make the transition onto easier or at the hinge of the ramp…

view full answer...

Answer 7

Hi Bernadette, You would want to plug your 50 amp to 30 amp adapter in to the power pedestal and then connect your Portable Power Watchdog Surge Protector #HU42VR to the adapter. Once the Watchdog lights show that the connection is good you can…

view full answer...

Answer 8

Yes, we do. What you are describing sounds like the Inner Frame Brackets for Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Hitch item #RP27FR. I have attached a picture below. These come welded to the frame exactly where you…

view full answer...

Answer 9

If you were to use the 4 inch offset ball #BWGNXA4085 the pin weight on the ball will not be changed. What will change is where the weight is carried on the truck. Using the offset ball will put more weight 4 inches back from the center of the…

view full answer...

Answer 10

Hey Kevin, the Portable Power Watchdog Surge Protector with Bluetooth and WiFi #HU32VR that you referenced weighs 4 lbs. The length of the cable is 10 inches.

view full answer...

Will Furrion Vision S+ Wireless RV Backup System Fit Old Furrion Vision S Trailer Prep

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching