bing tracking image
  1. RV Camera System
  2. Rear View Safety
  3. Backup Camera
  4. 7 Inch Display
  5. Hardwired
  6. Mirrored Image
  7. Night Vision
  8. Removable Sunshade
Rear View Safety Backup Camera System - 4 Camera Setup - Quad View Monitor

Rear View Safety Backup Camera System - 4 Camera Setup - Quad View Monitor

Item # RVS-062710
lowest price pledge
Our Price: $750.47
You Save: $404.87
RV Camera System
This item qualifies for Free Shipping
Shipping Weight: 13 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Lowest Prices for the best rv camera system from Rear View Safety. Rear View Safety Backup Camera System - 4 Camera Setup - Quad View Monitor part number RVS-062710 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (18)
  • Q & A (0)
  • Videos (3)
  • Photos
  • Why etrailer?

Rear View Safety RV Camera System - RVS-062710

  • Backup Camera
  • 7 Inch Display
  • Hardwired
  • Rear View Safety
  • Mirrored Image
  • Night Vision
  • Removable Sunshade
  • Dashboard Mounting Bracket
  • Suction Cup Mount
  • Below Rear Clearance
  • 130 Degrees

  • Rear View Safety backup camera system
  • 7" Digital TFT LCD color monitor
    • Quad view
    • Removable sunshade
    • Mirror image capability
  • 4 Cameras
    • 2 CCD color backup cameras
      • 130-Degree viewing angle
      • 50' Infrared night vision
    • 2 CCD color side cameras
      • 120-Degree viewing angle
      • 30' Infrared night vision
    • IP69K Rated - keeps out dirt and moisture
    • 20G Vibration and 100G impact rating
  • Includes all wires, connectors, and mounts
  • 1-Year warranty

RVS-062710-10 Backup Camera System | Four Camera Setup with Quad View Monitor

Installation Details RVS-062710 Installation instructions

Video of Rear View Safety Backup Camera System - 4 Camera Setup - Quad View Monitor

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for RVS Rear View Safety Backup Camera System Review

Hi there, RVers. Today we're going to be taking a look at RVS' rear view safety backup system. These are available in different configurations up to four cameras. We've currently got the four camera system installed on our RV. The four camera system comes with a front, a rear, and two side cameras. Here at the back we've got our two rear cameras.

Now, the system is designed for one of these to go on the front, but you can mount the front camera wherever you really like. My friend Tom's dad mounts his over the door of his RV so he can watch his camp site and use it as a security camera.Right now you're looking at the one we've set up low at the back of our vehicle to make it easy when backing up for hooking up this flat tow setup. When we toggle to the next camera, we've now got our high mounted rear camera that'll allow you to see your entire flat tow setup pulling behind you. This is also nice for pulling a trailer and you want to monitor your cargo in the back. We also have a left and right side camera system, which makes it easy when parking and backing up where you need to see down the side of your RV.If we continue to toggle through, we'll have multiple display modes up.

Here, we have both of the cameras we have installed in the rear. Here, we have both of our side cameras. You've got a three camera set up here with the rear and both the sides, and a four channel setup, where you have both the sides. And we have two rears here, but it could be your front and rear.It's just another layout with all four cameras, and we've circled back around to our first camera, which is our low rear camera. These display options will vary depending on how many cameras you have.

The monitor system will accept up to four.This is our side camera on our driver's side. All of the cameras feature infrared lights to assist its vision in low light settings. The nice thing about the front rear cameras is they come with a sun shade to assist its vision in high light settings, and the brackets that come included with those will allow the camera to swivel both up and down. The screws on the side can be loosened and tightened to allow you to make that adjustment.Here's our passenger side camera. All the cameras that come included with the kit are going to be vibration and impact resistant.

Your side cameras will have two mounting options. You'll have the adhesive backing that we chose to install on ours, which gives it a nice flush mount, which gives it a real good factory look. There are also a bracket set up that you can install on these. It will have it stick out about an inch when the brackets installed, but what's nice about the brackets is that the cameras will be adjustable so you can tweak those to the best vision option that works for your RV.Three out of the four cameras that you can hook up to the monitor system will have trigger wires available. These trigger wires, when 12 volts as applied to them, will turn on that specific camera. So on our system here, we hooked our side cameras up to our front blinkers, so that way whenever I turn the blinker on, that 12 volt signal from the blinker is sent to our system and it turns those on. We also have one hooked up to our reverse lights for the rear camera. Here, you can see it activating as I turn my blinkers on.There's a slight delay when you turn the blinker off before it returns to the normal position, which is usually your front camera or camera one. And here's our left. As long as the blinker remains active, this camera will stay on. Same goes for reverse.Now, when you put your vehicle in reverse, it automatically switches to your reverse camera. Here, you would see it on. When it gets this trigger signal, that will inaudible 00:03:33 switch to that camera. inaudible 00:03:34 grid lines up, making it easy to back into a parking space. And it also turns on the audio circuit. You're hearing me through the camera system right now. This is nice if you've got anybody in the back guiding you into your spot. You'll be able to hear the directions.This camera system's not only great for increasing your confidence and safety as you're driving down the road by providing you with vision all around your RV. It also is great for a security system, so when you get to your destination, you can monitor your camp site and your belongings, in the event that any animals may come along to try and get some food, or you have any unwanted guests that want to troll into your camp site.The menu button next to the power button will pull up the menu where you can adjust all the display output options on your camera here. This is going to vary between picture quality, brightness, as well as which cameras are currently being displayed. In the bottom right, you can also reverse the camera. This gives you a few more mounting options. If the location that you want to mount it works best with the camera upside down, go ahead and place it upside down and then press the reverse button. Through the menu on the turn option, you can adjust it so that specific camera displays upside down all the time, which would be right side up for you.The unit also comes with a remote. This is nice if you're using it as a security system. I can be sitting here at the table, just inaudible 00:04:54 look around outside. We can cycle through all of our cameras and see that everything here at the site is a-okay.When comparing this other camera systems on our website such as the ones from Voyager, I found that the RVS system has a better audio quality coming out of it in comparison. However, I found that the Voyager has a little bit crisper picture. So if picture quality is better for you, then the Voyager might be a better option, but if you really are having trouble hearing the people behind you and you want those directions, the RVS system that we have here is probably a better option.Another difference between them is that the RVS cameras use a five wire connector, where the Voyager systems use a four pin connector. The four pin connector, I've found, is a little more common and is often pre-installed on many RVs, even if they don't have a camera system. So installing a Voyager system is often a little bit easier if the wiring is already run to the back, because routing the wiring can be some of the most time consuming parts. So if you can use the wire that already exists in the RV, it greatly decreases the amount of time for the installation.You'll want to begin your installation by determining what you already have on your RV. Some systems already have cameras mounted in the back, and may already have cameras mounted at the side, and they may already have camera wiring run through them.Once you determine what you have, then you'll want to determine where you want to put the cameras that come in your kit. We're going to be placing two cameras at the back. This kit's typically designed for one of those to go on the front, but our customer requested the other to be in the rear. And we're going to be mounting both the side cameras. There was already wiring ran for our camera through the back. There is wiring that comes in your kit if you don't have a wire that's already run.If you need to route your wiring, you're going to run that from your monitor to wherever you've mounted your camera. When routing your wiring, it's best to avoid any moving objects, such as your steering and suspension, and anything excessively hot, such as your exhaust. In a lot of cases, running it down and then underneath the vehicle back up and then inside is the easiest way to do it.For your front and rear cameras, you'll have a bracket that you'll need to mount. We're going to be mounting the rear. We're going to use the hardware that already existed on our RV. There is some hardware that comes with it, but depending on where you want to mount your camera, you may need to pick a more appropriate hardware for that application, whether that be wood screws or nut and bolts that are different sizes than what comes in your kit.We're going to mount the bracket by sliding our screws through the slotted holes on each side here in the back. And using a Phillips screwdriver for this hardware to tighten it down.Next, we're going to mount our camera into our mount there. It's not a bad idea, if you're mounting it up high on the back of the RV like we are here, to go ahead and, connect the electrical wire now. This way, just in case you drop it, it's not going to go all the way to the ground. So just line up. There's a couple little slots on each end. Line those up, so it only goes together one way. Go ahead and screw the locking nut together and then you can take the rubber protective covering and slide it over both.Now, it's optional, but there is a sun shield that comes with it. If you decide to use it, you simply just slide this over your bracket. I like to slide it on first. It's going to be held on by the same hardware that holds on the camera. I just find it a little easier to put that in place because it does a pretty good job of staying there. We'll now take our camera. We're going to line up the holes in the side, you have three holes on each side, with the hole in the center of our bracket, and the slots. We're going to start by doing the center hole to the center hole on the camera.Once you've got the bolt the center ones on on each side, and you can angle the camera to your desired position and then use the remaining hardware to put one on each side of that center one, locking it in place. You'll do that on each side of the camera. We can now push our wiring back up inside the motor home to hide it. We mounted our camera where cameras are typically mounted in the back, and a lot of RVs already have a location here to put one if they don't already have a camera, just like this vehicle did. But if you we're installing it in a place where there was no spot for it, you can drill a hole for your wiring, and I would recommend using an 11 16ths drill bit to make it large enough to fit your wiring and connector ends through there. That also happens to be a good size for the grommet that comes in the kit to poke up in there and seal up the hole you just drilled.To help get your grommet in place, you might need a small screwdriver to just poke the lip edge up in the hole as it is kind of a tight fit, but this is what we want, so that way it's a water-tight seal. We mounted our front camera here at the rear. Our customer wanted to use this as a closer camera towards this hitch. Hooking up this hitch mounted accessories and also backing up, hook this vehicle up for his flat tow setup.Your side cameras, so they're going to mount in a similar way. You do have brackets that will allow adjustment just like your rear and front cameras, but it also comes with a double sided adhesive pad that you can use. That's what we chose to use here, as it gives it a nice flush mount and it's just a little bit more appealing to the eyes using the flush mount.Once you've got all your cameras mounted and you've routed all your wiring up to the front of the vehicle, we now need to get our monitoring system hooked up. There's a harness that comes with your monitor and we're going to start hooking that up. The end with all the wires poking out of it that you see here, it's going to have all of your camera connections here, so if you routed your wiring inside, you can go ahead and connect all of your cameras to it. Those connect just like the ones in the back. And after you've connected them, you can cover them up with the rubber sleeve.You'll have a brown, a blue and a yellow wire that comes off of your harness. These are your trigger wires for your cameras. Your trigger wires will look for a 12 volt input, and when it sees one, it will automatically turn on the camera for that specific trigger wire. So you can see here this one's labeled channel four, channel three, and channel two.Channel one is supposed to be for your front camera. Channel two is designed to be your rear camera. Channel three is designed to be your left side camera, and channel four is designed to be your right side camera. So we've hooked channels three and four to our blinkers, channel three to the left front turn signal, and channel four to the right front turn signal. We just spliced right off of the bulbs for the turn signals, in order to get that 12 volt. So whenever we turn our blinker on, that blinker signal that's going to the bulb, making the bulb light up, is going here in flashing. Our system will detect that flashing and know, oh, that's your left turn, and it will automatically turn on the camera when it sees that left turn signal input.Same thing with our channel two. We hooked this to the reverse light circuit and brought it up here. So whenever we pull our vehicle in reverse, the 12 volts that was going to our reverse light is also going to our camera system. Once it sees the signal, it turns on the backup camera. You'll also then have a black and red wire that comes off this harness. Your black wire is ground, and you could hook this to any ground point. We went ahead and just used a ground stud located back behind our brake pedal. This will vary depending on your motor home, where you decide to mount it.And lastly, we have power. There's a couple of different ways you hook up power. You could hook it directly to the battery and that would power your camera system all the time. If you do have it hooked up to your battery all the time, you can turn the monitor off to save battery life, but there is still LEDs on it that will be lit up for the buttons, and over a long period of time, those could drain the battery.So what I've opted to do, instead of hooking it directly to the battery, we used a fuse tap to tap into a fuse that's only powered when the ignition's in the run position. This way the camera system turns on when you turn the key on. So if you are not planning to use it as a security system and you want to make sure that it's not going to drain your battery so you don't have to worry about it ever, this is a good option. You can pick up fuse taps here at the front camera, there is no trigger wire. If you want to select the front camera, you do so using the buttons on the monitor. Now, you can see here we've got a lot of extra wire. Depending on the length of your motor home, you may have a lot of wire like this too. This is a shorter motor home, so the excessive length that you get here, we can just bundle up and zip tie out of the way. I do however really like that you get so much cable length. This camera system will work with just about all RVs out there without needing additional extensions. Some of your longest ones may require them, but for your average and slightly larger sized ones, there'll be plenty here. So we're just going to take this and we're going to shove it under the dash and zip tie it up out of the way.Then pick out a location to mount your monitor. We've decided to put ours on the dash, a little bit on the passenger side, but close to center. And we've angled it towards the driver. It's a pretty large monitor, so placing it in the center and on the driver's side will likely obstruct the driver's view, so I do highly recommend putting it off towards the passenger side of it.There's a couple of different mounting brackets that you'll receive, to choose some different locations to mount ours. We used the dash mount, which has a double sided adhesive underneath, and there are a couple of holes in it where you can run some self-tapping screws down to further secure it to your dash.The other option you'll get is a wall or ceiling mount that you can put and be able to pivot and rotate it. This is nice if you've got the extra room so you don't have to worry about obstructing your windshield. However, on our particular RV here, there really just wasn't a good location. This kind of puts it a little too far back, makes it hard to see for the driver. You can't really go off to one side because it will interfere with our visors. But it is a good option if you do have the space.The only thing left to do is test it out. We've gone ahead and turned our key on. The system automatically powered up due to how we have it run. You can see here, we're currently looking at, this would be our front camera, but this, on our vehicle, is our lower rear mounted camera. You can cycle through the cameras with the button here, so you just want to make sure they all work. This is our backup camera, the high mounted one. We have our left and right side mount cameras as well.You can also watch multiple monitors at the same time when cycling through. Next, we'll test out our trigger wires. You'll want to try both your blinkers in reverse and make sure you've got those signals. As you can see here, whenever I flick the blinker switch, it switches to each side. And when we put it in reverse, we'll get our backup camera.And that completes our look at RVS' rear view safety backup system.

Customer Reviews

Rear View Safety Backup Camera System - 4 Camera Setup - Quad View Monitor - RVS-062710

Average Customer Rating:  4.6 out of 5 stars   (18 Customer Reviews)


Ask the Experts about this Rear View Safety RV Camera System

  • Wiring Diagram for the Rear View Safety Backup Camera # RVS-062710 For Cameras to Monitor
    I attached a diagram that I took from the instructions for the Rear View Safety Backup Camera # RVS-062710 that shows how all of the monitors connect.
    view full answer...
    Image 1 for
  • Rear View Safety Backup Camera Recommendation that Has Four Cameras
    If your goal is to have a total of 4 cameras your best solution is to go with the Rear View Safety Backup Camera System # RVS-062710 as it is very similar to the discontinued RVS-770616-2133 that you referenced except it has the 4th camera you are wanting.
    view full answer...
  • Wiring Diagram for Rear View Safety Backup Camera System # RVS-062710
    Absolutely! On the diagram that you mentioned, which I have attached for reference, the wire numbers are as follows: 1. Red (power +) 2. Yellow (Left) 3. Brown (Right) 4. Blue (Back/Rear) 5. Black (Ground) I have also attached the complete installation instructions for the Rear View Safety Backup Camera System # RVS-062710 that you can take a look at.
    view full answer...
    Image 1 for
  • Backup Camera System Recommendation for 35 Foot Class A Motorhome
    I have the perfect solution for fitting your 35 foot class A motorhome with a backup camera system. The Rear View Safety Backup Camera System with Side Cameras, # RVS-062710, will give you the visibility you need. I personally prefer the wired systems because you don't have to deal with any interference and have a reliable system when you need it. The 2-color CCD side cameras have 120 degree viewing angle and use 9 infrared lights per camera for 30' of infrared night vision . The heavy-duty...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Upgraded Camera Kit Recommendation for 2007 Damon Tuscany with Night Vision
    The Rear View Safety Backup Camera System # RVS-062710 is a really solid option that would give you 4 cameras you could have mounted on your 2007 Damon Tuscany 4072. The monitor is bigger at 7 inches and the cameras have night vision like you are wanting as well so it would be just what you are looking for. I attached a review video for this for you to check out as well.
    view full answer...
  • Troubleshooting RVS-062710 Cameras That Blink With Turn Signals On
    If the cameras are turning on and off as the turn signals blink, it indicates that you've connected to the incorrect power wire. Instead of the turn signal wire, use the running lamp circuit as the power wire. To turn on the camera, you'd just turn on the RV running lamps which would power up the cameras. I've linked to the installation instructions plus a product demonstration video.
    view full answer...
    Image 1 for
  • Why Would Observation System Have Side Camera Come on With Running Light Circuit
    What you described sounds like a short between the running light circuit and the right turn signal circuit which would cause the side camera to come on with the headlights/running lights. So basically what you'd want to do is go over the wiring of the side camera on the right side and see if you can find where the two circuits might be shorting out to each other and fix as necessary.
    view full answer...
  • Adding Cameras to the 2021 Thor Gemini Motorhome
    Yes, we have several options for this. You can either add on to the existing system you have, if that is an option. You will need to identify what system you have on the RV to know what options you have toward add on cameras as varying makes cannot be combined. Or, you can replace the existing system with a more complete option that has all the features you want. Something such as the Rear View Safety Backup Camera System with 4 Cameras and Quad View Monitor, # RVS-062710. I have attached...
    view full answer...
  • Wireless RV Camera Install
    The Rear View # RVS-062710 camera system that you referenced is designed for an all-wired system for Class-A, B, or C RVs. For a wireless system on your travel trailer I would recommend the Furrion # FCE48TASL-07 wireless camera system. The 7" screen is much easier to see especially in multiple-camera mode. Users have reported satisfaction with the reception in various trailers. It has a very clean install and the cameras are not as noticeable.
    view full answer...
  • Troubleshooting An RVS Camera System With Mixed Up Camera Views
    I spoke with the manufacturer and they stated they have experienced this is the past with another Rear View Safety Backup Camera System # RVS-062710 and that it's a signal issue. To resolve the issue they recommend disconnecting power to all cameras and then to connect and trigger them one at a time to see if they correctly trigger and go back to their correct side.
    view full answer...
  • Could Wiring of Weldex RV Backup Camera System be Reused with RVS Backup Camera
    So the Weldex camera setup you have is discontinued and notoriously had bad connections on the wires and in the circuit boards of the cameras and monitors. There might be a way to adapt the wiring you have with a camera we have like the Rear View Safety Backup Camera System # RVS-062710 you referenced but since the wiring of the system you have is not reliable I would strongly recommend just starting over with an all new kit like the one you mentioned.
    view full answer...
  • Observation Camera System for 2018 Ram Longhorn Laramie and Trailer
    Based on what you were checking out it looks like you are in need of an observation camera for your 2018 Ram Longhorn Laramie pulling a trailer, and we have exactly that. I strongly recommend the Rear View Safety Backup Camera System - 2 Camera Setup # RVS-770614 or for more viewing options, the Rear View Safety Backup Camera System - 4 Camera Setup - Quad View Monitor # RVS-062710 because they give you a full range of viewing with a large 7 inch color monitor and night vision so you...
    view full answer...
    Image 1 for
  • Does The Rear View Safety Backup Camera 4 Camera System Allow Viewing 4 Sources At Once?
    The Rear View Safety Backup Camera System - 4 Camera Setup # RVS-062710 does come with the option to view all camera inputs at once. It has the quad view monitor. However, there is an option that does allow this. An option you may want to consider is the Rear View Safety Backup Camera System - 4 Camera Setup - Quad View Monitor # RVS-062710 which includes another camera. This will give you 2 rear view and 2 side view cameras with Infrared ability.
    view full answer...
  • Recommended Quad View Camera System For Ford F250 Camera And Side/Rear Cameras For 20ft Cargo Hauler
    We have exactly what you are looking for. I recommend the Rear View Safety Backup Camera System - 4 Camera Setup - Quad View Monitor # RVS-062710 along with the # RVS-2133 for quick connect/disconnect to your 20 foot cargo hauler. This system will give you the camera for your F-250 and the two side and rear view cameras for your trailer all with the ability to see all 4 cameras at once or individually. This has a 7 inch monitor and the cameras have the infrared so you can see clearly...
    view full answer...
  • Back-Up Camera System for Rear of Trailer
    A camera system on the back of your trailer is a great idea an I highly recommend the Rear View Safety Backup Camera System with Side Cameras # RVS-062710. It has a backup cameras that has a viewing angle of 130 degrees and and will even give you infrared night vision up to 50 feet; the side cameras have a 120 viewing angle and 30 feet of night vision. The cameras are also rated to prevent any damage from moisture and has a 20G impact rating. I also recommend using the Trailer Tow Quick...
    view full answer...
  • RV Camera System That Works with Wiring on 2015 Forest River Cherokee Grey Wolf Travel Trailer
    We can help you choose a camera system to make travel in your Grey Wolf trailer a bit less stressful even if that camera cannot use the existing wiring socket in the trailer. For maximum safety and visibility the item I suggest is the Rear View Safety camera system # RVS-062710. This complete 4-camera set-up include two side cameras to make it easier to pass other vehicles and to position the trailer properly at your destination campsite. This also includes two heavy-duty backup cameras....
    view full answer...
  • Recommended 4-Camera System for a 2015 Heartland Cyclone 5th Wheel Trailer
    I do have a solution for you, but I am not sure if your 2015 Heartland Cyclone already comes pre-wired for a camera system so I wouldn't know if there are specific connectors. The camera system that I recommend installing on your Cyclone is the Rear View Safety Camera System # RVS-062710 which comes with 4 cameras and then a quick connect kit # RVS-2133. I recommend connecting the 2 cameras on the side of your 5th wheel trailer to the same circuit so that you can utilize all 4 cameras. An...
    view full answer...
  • Can a Different Camera System be Used for a 5th Wheel that has Furrion Camera Wiring
    You can definitely use a different brand of backup camera for your 5th wheel, you will just need to do some basic modifications on your end. The Rear View Safety Backup Camera System # RVS-062710 is a popular item especially when used with a quick connect kit # RVS-2133 for easy connecting and disconnecting from your tow vehicle. To modify your trailer you would need to remove the mounting bracket and then find a way to splice into the wiring and connect the other camera.
    view full answer...
  • Is There an Alarm Function on the Rear View Safety Backup Camera System
    It sounds like you're asking about whether or not the Rear View Safety Backup Camera System with 4 Cameras # RVS-062710 has a sensor system built in that gives audible alerts. The Rear View Safety Backup Camera System you're looking at normally is triggered by open circuits as you turn on different functions on your coach; it does not have a sensor system built into it that will give audible alerts when backing up. This system also has an audio feature/microphone built in so that someone...
    view full answer...
  • What Camera Systems do you Have that will Work with Four Cameras
    For a system that works with four cameras the options I have are wired. The Rear View Safety Backup Camera System part # RVS-062710 is the way to go. It is a very high quality system that uses top quality components. They work really well together and offer very good video quality when compared to a lot of the other systems which of course have less cameras.
    view full answer...
  • 4 Camera Backup Camera System For Trailer Compatible With 2 Different Trucks
    For your trailer and 3 camera feature, I recommend the Rear View Safety Backup Camera System with Side Cameras and Quick Connect Kit # RVS-062710. This will give you the functions you are looking for. You can then use the Quick Tow Connect # RVS-2133. I reached out to my contact at Rear View Safety and to give you the wiring for your second vehicle, you can use the Quad view monitor power harness # RVS-504 with a second tow connect kit and camera.
    view full answer...
  • Why Would Turning On Headlights Activate Rear Camera and Override Side Blinker Camera on RV
    Your backup camera setup is wired currently to show the rear camera angle whenever the running lights/headlights are turned on. This is a pretty common way to trigger a backup camera. Since this trigger overrides the turn signal triggers the easiest solution will be to switch the rear view camera to a reverse light circuit instead. This will prevent the rear camera from showing when you turn the headlights on. You might go through the manual of your camera setup to see if there is a way...
    view full answer...
  • Do Side Cameras Come On with Turn Signals on Rear View Safety Backup Camera System RVS-062710
    Yes, you can install the Rear View Safety Backup Camera System with Side Cameras Item # RVS-062710 to have the side cameras come on when a turn signal is engaged. There are instructions that explain different ways the cameras can be activated and this is one of the methods explained. The method I recommend is having all the cameras on while driving with the quad view monitor so you can see all around as needed.
    view full answer...
  • Can the Rear View Safety Backup Camera System be Set to View All 4 Cameras When Not in Reverse
    You definitely can install the Rear View Safety Backup Camera System # RVS-062710 so that the side and rear cameras are constantly on while your combine is on. Instead of hardwiring them to a reverse light circuit simply connect them to a circuit that gets power when you start your combine up.
    view full answer...

< Previous

Do you have a question about this RV Camera System?

  • Why

    At we guarantee:
  • Highest quality rv camera system for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv camera system information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Tyler C
Edited by:
Tyler C
Employee Jeff D
Installed by:
Jeff D
Employee David F
Installed by:
David F
Employee Joshua S
Video by:
Joshua S
Employee Dustin K
Video by:
Dustin K
Employee Jacob T
Video Edited:
Jacob T
Employee Mary E
Updated by:
Mary E
Employee Wilson B
Updated by:
Wilson B
Employee Noah M
Updated by:
Noah M
Employee Daron K
Written by:
Daron K
Employee Ryan G
Test Fit:
Ryan G

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-800-940-8924