Is Furrion Vision S+ Direct Replacement for Vision S

Question

Question:

Would the S+ system be a direct replacement for an existing S system?

asked by: Bill

0

Expert Reply:

Hey Bill, yes the Furrion Vision S+ # FR64AD would be a direct replacement for your current Vision S system. None of it is backwards compatible with the standard Vision S system though.

expert reply by: Jameson C

0

Furrion S.

6/15/2025

If you need to replace a furrion sharkfin camera can you use a furrion S+ camera instead?

Reply

Jameson C.

6/16/2025

@FurrionS With a standard Vision S? No you can't.

Reply

Tina

6/22/2025

@JamesonC I currently have a Furrion Vision S camera system on my fifth wheel. If I wanted to replace it with furrion vison S+ system can I remove all the cameras and replace with all the S+ or is the wiring different. My 2020 grand Design Momentum came with it prewired and the furrion S system

Reply

Jameson C.

6/23/2025

@Tina All of the wiring is the same so the connectors and everything would be the same which means a simple install.

Reply

Peter

10/20/2025

Our 2022 Pinnacle 32RLTS came equipped with the Furrion Vision S rear and side cameras pre-installed. I understand that the new Vision S+ isn't backwards compatible but will the cameras mount to the existing mounts without having to disturb any of the caulking of the mounts already on the RV?

Reply

Jameson C.

10/21/2025

@Peter The mounts and brackets for the Furrion Vision S and the S+ is the exact same so the kit part # FR64AD would work in place of what you have without causing any issues with the mounts like you asked about.

Reply

Answer 1

Hey Clarence! That would be great but none of the trailer camera systems are going to pair with vehicle monitors/screens. All of them will require a separate monitor. The Furrion is a really nice system so I do recommend it. Since the Vision S is…

view full answer...

Answer 2

Hey James, welcome back! The only plug and play wiring harness I have for flat towing is the Curt Custom Tail Light Wiring Kit for Towed Vehicles item #C96JR. This has a 4-way connector that plugs into your motorhome. This plug and play harness…

view full answer...

Answer 3

Hey Micah! Pacbrake has actually been around for a long time, more than 60 years. We have had customers ask for these air bags in the past, and we've seen them on vehicles coming in. Until now, Firestone has been the go to since their quality is…

view full answer...

Answer 4

Hey Tim! You can replace the old Furrion AC on your Grand Design with the Furrion Chill HE Low-Profile AC. However, the old one is an R410A unit and this is an R32 unit. Everything has switched to R32 due to the 2025 EPA regulations. This means you…

view full answer...

Answer 5

Hey there Martin! Yep, if you're using a Furrion RV Observation Camera with your 2025 Chevy Silverado 2500 HD Custom 4x4, you'll likely need the Furrion 7-Way Vehicle Power Adapter with Power Switch part #FR87PR. Newer Chevy and GMC trucks…

view full answer...

Answer 6

Hello Ken, thanks for reaching out. Sadly, the Furrion Vision S camera system is being discontinued and replaced with the Vision S+. The camera for the Vision S+ is not backwards compatible with the Vision S system, so sadly if your camera is bad,…

view full answer...

Answer 7

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 8

The B&W Continuum #BW78FR and the Reese Strait-Line #RP66083 are both great systems. The B&W Continuum is going to be easier to set up, but as far as sway control goes, I definitely have to give the edge to the Reese Strait-Line. The…

view full answer...

Answer 9

The biggest issue we see with the Furrion Vision S Wireless RV Backup Camera Systems like part #FOS43TASF comes from the wiring on the vehicle side, the running light circuit in particular. If it's less than 12 volts then the camera won't be…

view full answer...

Answer 10

The 4.3" Furrion Vision S Camera System monitor #FR77FR is going to pull 500mA at 12v when the screen back light is on and 300mA at 12v when the light is off.

view full answer...

Answer 11

Firestone does indeed offer replacement air tubing. It's available in a 18 foot length as part #F49ZR or a 22 foot length as #F99ZR. To cut the tubing to length, using a tubing cutter such as part #AL10530 is highly recommended as it's…

view full answer...

Answer 12

Hi Phil; the air bags will not have an impact on ride quality when you run them at the minimum 5 psi. This complete adjustability is the best things about air bags when compared to other suspension enhancement options. Between the two brands,…

view full answer...

Is Furrion Vision S+ Direct Replacement for Vision S

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching