Availability of Furrion Vision S+ With 5" Monitor

Question

Question:

Im looking on your website for the Furrion Vision S+ system with 5 monitor but only see it with the 7. Do you also offer the 5 versions.

asked by: Clark L

0

Expert Reply:

Hey Clark! We didn't have the version with the 5" screen so I went ahead and added it to our site for you. For the standard system we have the Furrion Vision S+ Wireless RV Backup System w/ 1 Camera - 5" Screen # FR39DF. If you want the side marker cameras as well you need the # FR69DF.

What kind of trailer do you have?

expert reply by: Robin H

0

Vision S+ w/ 5" Screen
(click to enlarge)

Sean L.

8/14/2026

The only difference between these and the 7" is the screen size right? Same system otherwise?

Robin H.

8/14/2026

@SeanL that is correct, the # FR57AD and # FR64AD just have the larger screen. It is the same camera system with the same features, the monitor size is the only difference.

Tim L.

8/19/2026

If I want to add the side cameras later is that possible? Or do I have to make that decision now?

Robin H.

8/19/2026

@TimL you can add them later, you don't have to make that decision right now. The system supports up to 4 cameras so you can add the marker light cameras # FR84AD at any time. You can even add another backup camera like # FR24AD if you want one over your door for security.

Answer 1

Weight distribution works to distribute the tongue weight of a trailer up to the front axle of the tow vehicle so that it will sit more level and handle/brake better. That being said the systems do not "reduce" tongue weight or allow you to…

view full answer...

Answer 2

Hey Kyle! The etrailer Electric Trailer Jack #e72QV is a straightforward bolt-on upgrade for your utility trailer. This will fit the standard A-frame jack bolt pattern where your manual jack is currently installed. The nice part with this particular…

view full answer...

Answer 3

Hello Scott! Yes, the etrailer Electric Trailer Jack #e72QV can replace your existing Lippert electric jack. It has a 3,500 lb lift capacity, 18" of powered travel, and another 9-3/4" of adjustment from the drop leg. It bolts onto your…

view full answer...

Answer 4

Hey Ethan, congratulations on the new Jeep! I can definitely help you out. For a complete setup you will need a tow bar, base plate, safety chains, wiring, and then your portable brake system. For a Roadmaster setup I recommend the following:…

view full answer...

Answer 5

Hi Mark, You shouldn't need to use the Furrion 7-Way Vehicle Power Adapter part #FR87PR because your 2018 Ram 2500 is from the fourth generation of the Ram 2500 before they did the huge overhaul that changed the circuits and resulted in the newer…

view full answer...

Answer 6

Hey Mike, your 2025 Chevy Silverado 2500HD will have the power issue with the Furrion Vision S + #FR57AD that you have so you would need a solution like the part #VGR64VR that you referenced. Or if you don't want to mess with any wiring you could…

view full answer...

Answer 7

*Updated From Below Hi Michael; I'm sure you're right, it is probably prepped for the Furrion. Since Furrion is phasing out the old Vision S, and parts won't be available soon, you want to get the new Furrion Vision S+ Wireless RV Backup…

view full answer...

Answer 8

Hey Bill, yes the Furrion Vision S+ #FR64AD would be a direct replacement for your current Vision S system. None of it is backwards compatible with the standard Vision S system though.

view full answer...

Answer 9

Hey, Joe. That's a great question. Backup cameras and rearview, observation, cameras are essentially the same, the difference comes down to how they’re wired. With a system like the Furrion Vision S+ Wireless RV Backup System #FR57AD, it’s…

view full answer...

Answer 10

Hi Eric, It sounds like you have a Furrion S Wireless Back-Up Camera System like part #FCE48TASL-05, which has a back up camera and two side cameras with integrated LED lights. The Furrion S Wireless Systems are only compatible with Furrion Vision S…

view full answer...

Answer 11

Hey Doug, congratulations on the new truck and trailer! That is a nice setup for sure. Unfortunately, the backup cameras aren't going to integrate with your dash cam system. Since you're already prepped for Furrion, and it is the best on the…

view full answer...

Answer 12

Hey Mary! The 12V PWM Filter #VGR64VR will work with the Furrion camera and prevent any issues with the PWM from your 2020 Sierra. However, I do recommend getting the Furrion Vision S+ #FR57AD over the old Vision S. They use the same mount so this is…

view full answer...

Availability of Furrion Vision S+ With 5" Monitor

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching