1. Home
2. RV Camera System

Tony, the Reese Sidewinder #RP34FR (Reese part number 69220) is a direct replacement for the 68220, so assuming your trailer has one of the following pin box you can use your brother-in-laws pin box no problem (Free is a pretty sweet price!): Fabex…

Hey Doug, That's a good question because fit is really important so the cover stays snug on your trailer, and there is a specific way to measure for the etrailer covers. It's pretty simple, and what you want to do is measure the body of the…

Hey David, unfortunately all of the RV camera systems like the Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision #ASA57YR are only going to be compatible with their respective monitors. Right now, there is not currently any way to…

Since your trailer has the bracket #FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part #FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3…

The newer Chevrolet and GM pickup trucks have a known power deficiency issue with the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras #FCE48TASL-05. There is likely nothing wrong that you did, the problem is the…

The Furrion camera system we have is a closed system and would not be compatible with the in-dash display so you would need to purchase GM's camera system to be able to connect to your display instead of having another monitor. If you do end up…

I checked with Furrion and the 7 inch and 5 inch monitor version of the Furrion observation system #FOS05TASF use part #FR79SR. The smaller 4.3 inch size use the part #LC776462. The ball of the #FR79SR is 0.85" or 21.59mm and the ball of the…

Since your current camera only says Voyager that means it is going to be the 1st generation. The WiSight 2.0 Camera #ASA74YR has Voyager 2.0 on the camera. So you are going want a new system with either the 4.3" Monitor #ASA24YR or 7"…

Hi Al, The 36841 Adco cover was actually made unavailable by the manufacturer so it is not something that can be purchased. That said, we do have a very similar cover for travel trailers between 20 and 22 feet, which is our RV Cover for Travel…

Hello Kurt, about how long is that section of pipe in your picture? Both the 8 inch long #277-000162 and the 13 inch long #277-000161 are safe to use with 1/2" pex pipes. Using a larger pad will provide more heat so if you can fit the larger pad…

Hey Ronnie, the Voyager Monitor #VOM719WP will replace your AOM-7694 monitor per Voyager, but you will have to splice the existing wires from your AOM-7694 to the new Voyager Monitor. There is no direct plug and play replacement monitor.

Yes, we do! To replace the wiper blades on your 2021 Winnebago Sunstar 29V you will need the 32" Wiper Technologies Windshield Wiper Blade item #WPR47FR. This wiper is sold individually but it works for both the driver's and passenger sides.…

Tony, the Reese Sidewinder #RP34FR (Reese part number 69220) is a direct replacement for the 68220, so assuming your trailer has one of the following pin box you can use your brother-in-laws pin box no problem (Free is a pretty sweet price!): Fabex…

Hey Doug, That's a good question because fit is really important so the cover stays snug on your trailer, and there is a specific way to measure for the etrailer covers. It's pretty simple, and what you want to do is measure the body of the…

Hey David, unfortunately all of the RV camera systems like the Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision #ASA57YR are only going to be compatible with their respective monitors. Right now, there is not currently any way to…

Since your trailer has the bracket #FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part #FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3…

The newer Chevrolet and GM pickup trucks have a known power deficiency issue with the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras #FCE48TASL-05. There is likely nothing wrong that you did, the problem is the…

The Furrion camera system we have is a closed system and would not be compatible with the in-dash display so you would need to purchase GM's camera system to be able to connect to your display instead of having another monitor. If you do end up…

I checked with Furrion and the 7 inch and 5 inch monitor version of the Furrion observation system #FOS05TASF use part #FR79SR. The smaller 4.3 inch size use the part #LC776462. The ball of the #FR79SR is 0.85" or 21.59mm and the ball of the…

Since your current camera only says Voyager that means it is going to be the 1st generation. The WiSight 2.0 Camera #ASA74YR has Voyager 2.0 on the camera. So you are going want a new system with either the 4.3" Monitor #ASA24YR or 7"…

Hi Al, The 36841 Adco cover was actually made unavailable by the manufacturer so it is not something that can be purchased. That said, we do have a very similar cover for travel trailers between 20 and 22 feet, which is our RV Cover for Travel…

Hello Kurt, about how long is that section of pipe in your picture? Both the 8 inch long #277-000162 and the 13 inch long #277-000161 are safe to use with 1/2" pex pipes. Using a larger pad will provide more heat so if you can fit the larger pad…

Hey Ronnie, the Voyager Monitor #VOM719WP will replace your AOM-7694 monitor per Voyager, but you will have to splice the existing wires from your AOM-7694 to the new Voyager Monitor. There is no direct plug and play replacement monitor.

Yes, we do! To replace the wiper blades on your 2021 Winnebago Sunstar 29V you will need the 32" Wiper Technologies Windshield Wiper Blade item #WPR47FR. This wiper is sold individually but it works for both the driver's and passenger sides.…