RV Camera System - Motion Detecting

Hey Bill, yes the Furrion Vision S+ #FR64AD would be a direct replacement for your current Vision S system. None of it is backwards compatible with the standard Vision S system though.

Hey Kim, thanks for reaching out. The Firestone Ride-Rite Air Bags with Easy Mount Compressor #F24XV do fit your 2020 Ram 2500 with rear coil springs, but the hang-up is the under-bed gooseneck hitch. On your truck, the air bag brackets and the…

Hi Martyn, For your 2020 Keystone Cougar 27SGS Half Ton with the 3 step MORryde step unit, the correct option you’ll want is the MORryde Safe T Rail Telescoping Handrail part #MR54BR. This model is designed to mount to the flat fiberglass exterior…

Hey John! With four steps the MORryde Safe-T-Rail Telescoping RV Hand Rail #MR54BR is likely the better choice over the short #MR54RV. I went ahead and attached the full dimensions of both below so you can see what you think will fit best on your…

*Updated From Below Hi Michael; I'm sure you're right, it is probably prepped for the Furrion. Since Furrion is phasing out the old Vision S, and parts won't be available soon, you want to get the new Furrion Vision S+ Wireless RV Backup…

Hey Mike, it is important that you use the included power cable with the Furrion Vision S+ Wireless RV Backup System w/ 1 Camera #FR57AD like the instructions indicate. If this is like a hardwire install I would look for a cigarette lighter to 2-wire…

Hey Michael. The backup camera that comes with the Furrion Vision S+ System item #FR57AD has built in mounting holes in the casing. It comes with four #6 x 3/4" flat head self-tapping screws, four #4 x 1/4" self-tapping screws, sealant, and…

Hey Dustin, welcome back! The Timbren SES #TFRSDJ will offer you more support over the severe service kit #TFRTT350J. Are you experiencing squat with your current Timbrens? If you are then it would be worth upgrading. If you really aren't, then…

Hello Jay, I’m curious what panel you’re planning to use. How many panels will you be running, and what is the total wattage? I want to make sure the controller I recommended is properly sized for your setup. Right now, your camper has the Go Power…

Hey Katja, the Curt Echo Mobile brake controller part #C51180 would be your best option. This is a wireless brake controller and all it requires is a 7-way with the taillight functions and the 12 volt accessory circuit active and you'd be set. So…

Hey Christie! Yes, the Furrion Vision S+ Wireless RV Observation System w/ 3 Cameras #FR64AD will fit that mount on your camper. You're prepped for Furrion, and that mount works for both the Vision S and Vision S+. Since the S+ is the newer…

Hello Berniece, thanks for reaching out. Yes, the Lippert On-The-Go Telescopic RV Exterior Ladder #LC64HD will work great for your 2023 No Boundaries 16.1 camper. According to the online specs, that camper is about 10' 4" tall. The ladder…