Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there. I'm Michael with etrailer.com. Today we're going to take a quick look at the rear view safety backup camera system with rear sensors. Really, this is three different components combined into one system. It's going to provide you a more comprehensive view behind your trailer or motor home or large vehicle. You're going to get your sensors that will allow you to be alerted to anything that's behind you.
It's going to help give you the distance behind your vehicle. So as you're backing up, you'll know if anything is close by. You've got your camera here, which can be mounted on the rear of your vehicle. It's got a 130 degree viewing angle. So it's going to give you a nice wide view of everything that's behind you.
It's got a infrared night vision on there so you can see up to 50 feet at night.So you've got even in the low light conditions, it's going to do a good job for you. This is IP69 rated, so it's going to keep out any dirt and moisture. It's going to last a nice long time. You're not going to have any problems with that. It's also 20G rated for vibration and 100G rated for impact, so it's very durable.
Going to do a good job showing you what's behind your vehicle as you're backing up. And we also have our monitor here. This is a seven inch TFT digital LCD color monitor. It's going to show us what our camera's seeing. It's also going to integrate with our backup sensors to show us that distance that we have behind our vehicle.
And this system is really built. It comes with one camera, but it's got capabilities of up to three. So if you're doing all the work to install this, you're set up for adding two more cameras in the future.If you wanted to add one on each side of your vehicle so it could become like a monitor. As you're turning left, you can set it up so that it automatically jumps to your camera on the left side of your vehicle, so that you can see the lane next to you. If you make sure that it's all clear before you change lanes. Same with the right. They've got the trigger wires in there, so that when you activate that turn signal it will switch to that camera. So it's going to be a very easy to use system. Like I said, it only comes with the one camera. But if you're running all this wire and everything for the one, it's nice having that add on capability so that you could add those two more cameras in the future if you'd like to. And you don't have to run nearly as much wire down the road.This does come with all of the cables, connectors and mounts that you're going to need to get this installed. And it is going to be quite a bit of a process to get all this run. When you're running your wires and cables, you want to make sure that you're staying away from anything hot or moving. They do include an instruction manual, a user's main product manual. The one that came with this kit was not super helpful. It gives you a general idea, but we do have a more detailed one on the product page here at etrailer.com that should help you get this all installed and make it more convenient for you. Overall, I think this is going to be a great kit to help increase your visibility, so that you can more safely back up or add cameras on, so that you can see all around all sides of your trailer or motor home or large vehicle.Just going to give you extra peace of mind, knowing that you can see everything that's there. You're not going to have to worry about hitting objects or potentially causing personal harm to someone else. So great system, very much a do it yourself kind of thing. You've got all the materials that you need, it's just going to be installing it. You do get just over 60 feet of cable to run from your camera up to the front of your vehicle. So it's going to be made for large vehicles. And it might take some work to get it all installed. But once it's installed, I think it's going to be a great addition for you just to help, again, give you greater peace of mind and increase your safety. That's going to complete our look at the rear view safety backup camera system with your rear sensors. Thanks for watching.
Customer Satisfaction Score:
86% were satisfied with this product
14% of customers were not satisfied
Ratings & Reviews
Katrina B.
10/28/2022
Its unfortunate to hear that this item failed for you. I see that our customer service department has found an alternate for you.
Rex D.
7/16/2021
Still works good
Do you have a question about this RV Camera System?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kate F.
3/18/2026
I am sorry for the frustrating instruction Charles. This monitor actually has two mounting options, which isn’t clearly explained in the instructions. The U-shaped bracket mounts to the sides of the monitor housing, not the sunshade. The thumbscrews go through the bracket and into the monitor to hold it in place. The four holes on the back are for an alternate mounting style, and that hardware is not included. If your kit is missing the bracket or thumbscrews, it may be incomplete.- I hope this helps =)