Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Whether you're driving, off hiking, or hanging out at camp, you'll always know what's outside your RV. Side and rear cameras cover blind spots while changing lanes and backing into a space - the rear camera also records video at night.
Reversing into a tight campsite or navigating busy roads? No problem! The backup camera gives you a clear, top-down view while the built-in microphone lets you hear your spotter - no more yelling or frantic hand signals. It's also motion-activated, so it'll give you a clear view right from your monitor whether it's a late-night visitor, a curious critter, or an opportunistic thief. And you can record video with an SD card (not included) perfect for keeping an eye on things while out on a hike. The side cameras have built-in LED marker lights so you'll stay visible to others as you merge or change lanes, even in low-light conditions.
No more worrying about dropped signals, electrical interferences, or lagging video feeds! This wireless camera system delivers a stable, real-time view, even if you have a longer RV, motorhome, or box truck. It'll hold a steady connection for up to 100' as you're cruising down the highway and up to 492' once you've parked at the campsite.
Switch between camera views with a quick tap of a finger and get a clear, real-time look at what's around your RV. The anti-glare 7" screen supports up to 3 cameras and even lets you watch all at once to help you keep an eye on traffic merging onto the highway. Need help backing into your campsite? Rear park assist marker lines guide you right into place.
This setup comes with 2 monitor stands, a cigarette lighter charger, and a USB-C power cable. The side cameras swap right in for your existing marker lights, and the backup camera mounts at the back of your RV. The monitor sticks to your windshield or sits on a tabletop wherever works best for you! And if your RV is already prepped for the Vision S+ system, you'll have an even easier time getting it all set up with little to no drilling.
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
Ratings & Reviews
consistent good service
Good product and great service
Easy to install. Works perfectly
Easy, quick install on 27' FR Alpha Wolf. Screen resolution is excellent. Really helpful with backing up in neighborhood or at campsite. Also helpful while traveling in traffic to see all around.
does not work
Excellent service and a great product. Wiring diagram for side cameras would have made the install even quicker.
Well….cameras keep losing signal. Guess I need to spend more time with the system? Review might be premature, but early assessment is mixed.
Hi Adam I haven't even opened the box yet. Camping comes out of storage April 26th!
Installing this camera system was easy to do and the customer loves the clear display.
I had a problem with the monitor. It didn't work but the customer service technician sent me a new one and I bought a second backup camera for my trailer and everything is working perfectly. Thank you to Andy. He was excellent getting me the right system for my motorcoach and trailer.
An excellent product, the best RV camera I have ever seen. The only complaint is the installation and programming instructions could be better. It took several U tube videos to confirm the proper wiring and programming instructions. Ordering the camera from etrailer was a delight with a knowledgeable and plesent representative on the phone. This was my first order from etrailer and was a delightful experience.
I bought this for my 2026 Jayco northpoint. Unit was set up for it. Super easy install and works great. Only complaint is my unit was set up for two high mount cameras. One over the door and one center on the rear. Could not find the kit that would do all four locations. So had to order this kit and order a separate high mount camera. Other than that it works perfectly.
The camera system arrived quickly (one day ahead of schedule). I tested the system before installing and was impressed with the quality of the product. I will be installing the side cameras back from the front marker light because of the awning post. I like the fact that I can power the cameras separately from the marker lights. Thanks to Elijah for his professional service in making sure that I purchased the correct product for my situation. Etrailer has been taking care of my RV and me for 10 years.
The rear lens is so wide that the following cars seem much farther away than they are. Also with that perspective it is definitely not helpful in backing. The switch to the side cameras is so slow that it is unhelpful in most lane changes. The screen is difficult to see on a bright day. But it does improve at dusk and works much better at night. The camera is basically good for letting you know if someone is behind you and not much else. The bright spots are the microphone from the rear and the speaker on the monitor. It is much easier to hear when someone is guiding you back. Also the night vision on the cameras seems a bit better than daylight use.
Works great. Easy installation on our 2025 Jayco Northpoint. But it was already prewired,so extra simple. Autumn was very helpful in ordering and helping with questions. I think I will now get the camera for the entry door. This is a great system with lots of easy options for what you need.
Easy install. Replaced rear camera with existing wiring. The side cameras went in rather easy as well. Tip: removed inside panels in pass thru storage to access wiring. WHITE is the ground. GREEN is power. (2021 Imagine xls MLE) Monitor is incredibly clear - a visual upgrade!
Lazer S.
4/14/2026
Glad to hear it's working well for you, Kevan! And thanks for the tips as well! Definitely helpful. ^___^ What are you towing this with?
Install was on a 2023 GD Momentum 395MS. RV had old Furrion Vision S already installed (older version - low resolution). RV was prewired, so install was a breeze. Just undo bracket, remove old adapter cable and rear camera plugged straight in.
For side cameras, you have to run a dedicated 12VDC wire for power, or use the power already there for the clearance light. Customer chose clearance light, so you simply replace the clearance light and make sure to wire the camera hot and clearance hot to the existing wire in the RV. Only shortcoming is that the cameras only work when the clearance lights are on. I added a 7-pin connector that I wired into the pin box junction box. This lets you plug the 7-pin into the truck to power cameras while driving, then unplug from the truck and plug into the new 7-pin receptacle. It then powers the cameras/clearance lights AND stows the cable up off the ground. I added a illuminated switch and the user has the option to turn off the power to the lights/camera and still use the receptacle for storage. They thought I was a genius!
My reason for only 3 stars is that while the cameras seem to work well and the range is good to the wireless display, I think the wireless display is not well implemented. It lets you see one camera in full screen or all 4 cameras at one. However, you can't select just 2 or 3 to be displayed. You can't select the order to display them in, nor can you rename the cameras to what you want (in case you didn't install where they think they should go). I literally had to swap two cameras to get the names to match. The system works OK, but the user interface needed more work. Since Furrion = Lippert, there is no chance they will ever try to improve the product. It is what it is.
Heather A.
4/10/2026
Really appreciate you taking the time to lay all that out, that’s some seriously thoughtful work on the install. That 7-way and switch setup is a really clever solution, I can see why they thought you were a genius. On the camera side, you’re spot on about how these systems are set up. The monitor is pretty limited by design, so you’re generally locked into either a single full-screen view or the fixed quad view, and unfortunately there isn’t a way to customize layouts, reorder cameras, or rename them. Swapping the cameras physically like you did is honestly the workaround we see most often when someone wants things to line up differently on the screen. The clearance light wiring limitation is also a common tradeoff. Your solution to give it constant power while driving is a really solid way around that, especially since it keeps everything clean and functional. Totally understand the frustration with the interface, but you definitely made the most of the system and improved it in a way a lot of people wouldn’t think of. Really helpful info for anyone looking at this setup.
Do you have a question about this RV Camera System?
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kate F.
10/8/2025
How does it not work Randy? Need a little more information to help you get this working. Did you do the install, or have someone install it for you? Can you please respond directly to the email that you receive with pictures of the entire install so I can try to identify the issue? I appreciate your time!