Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’ve got gear to load or need your trailer up for maintenance, having jacks on both sides makes it simple. Each jack in this etrailer kit lifts 3,000 lbs, giving you 6,000 lbs of total lifting power and 10,000 lbs of total support capacity. With 15-1/2" of lift, you can get your trailer high enough for tire work or storage without breaking a sweat. The sidewind handle has an 8" radius for smooth turning, and the built-in grease zerk keeps the mechanism easy to service.
Installing new jacks doesn’t have to mean breaking out the welder. The included bolt-on mounting plates let you place the jacks exactly where they work best on your frame—just line them up and bolt them down. The plates fit frames with a cross-section depth of 3" or less and are rated to 3,500 lbs. Each plate is 5" wide x 4-1/4" tall x 2" deep, giving you a solid connection point with minimal hassle.
When you’re done raising or stabilizing, just pull the pin and swing the jack up for storage. The swivel design pivots down into place for use and locks securely in either position. That means no need to remove or unmount the jack between trips, and no dragging hardware over bumps or curbs. It’s an easy, reliable setup that stays out of the way when you’re on the move.
These jacks are built to handle exposure and keep looking good. The outer tube has a black powder coat, the inner tube and footplate are clear-zinc finished, and the mounting plates add a matte black powder coat with an e-coat layer underneath. Together, these finishes fight off rust from road salt, rain, and mud. Even the footplates—7-1/2" long by 3-3/4" wide—help keep the jacks steady on soft ground instead of sinking in.
Every detail is designed for long service life, from the sturdy 2-1/4" outer tube and 2" inner tube to the included bolts and hardware. Each jack feels solid in use—strong, steady, and accurate in adjustment. The kit includes a 1-year warranty on the jacks and a limited lifetime warranty on the mounting plates, so you can count on them to keep doing the job season after season.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
Fast
Perfect thank you
very good quality and does the job!
Strong and accurate adjustments.
Perfect Fit! These work great and were reasonably priced from etrailer!
Very robust and excellent design
Product seems to be quality only issue was my package was ripped open and half the product was sticking out. So maybe just a little more quality shipping.
Easy install. I installed one on each corner of my 7.4x16 enclosed trailer with the help of my 4 year old. It took a while, but I blame him ??. One handle had a chip broken off, but super glue fixed it. Directions were spot on and shipping was fast!
Product works great
Heavy duty and has a grease zerk to keep up with gear maintenance.
You can always find what you need on etrailer at an excellent price!! Thanks for being there for what we need!!!
Pretty good jack and easy instal. Jack and mount has a little too much play, more than I expected. Didn’t like the pin it came with so replaced with one I had where I use a linchpin to unlock versus the spring and ball pin it came with.
These are heavy duty. Absolutely impres sed.
Stout!!, heavy in hand, should do the job quite adequately. I would like to see the lock washer and simple nut replaced with a steel lock nut, which would make it less likely to vibrate loose as these are not usually installed and uninstalled on a regular basis. Once in place they’re there so a lock washer to me (and I’ve seen them fail) presents a weak point in the entire assembly .
Good quality product, solid and easy to install. Maybe a version with a removable handle could be good
As always was able to find exactly what was needed for the job. And the shipping was very fast. Thanks for the excellent service.
Just right for the height up and down. Strong, gear ratio is right. Sure like the grease fitting…
High-quality build and a perfect fit for my application. It bolted up seamlessly with zero issues and added the extra stability I was looking for. Excellent product overall.
Stable, easy mounting, plenty of travel for slopped/uneven ground. Pushing max load? Pop them off and reattach at destination. *also: can't be stolen if they're not on the trailer. On light/med duty trailer (7k), the supplied bolts were longer (much) than needed, easy replacement with shorter Grade 8 bolts.
Do you have a question about this Trailer Jack?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Victoria H.
2/25/2025
Aww I bet there was a core memory made for your little one even if it took a little longer than you just knocking the job out yourself. There's nothing like the memories made with Dad working on stuff. Thanks for the great feedback Joshua, happy hauling to you and yours!