Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2" Receiver - 44" Wide

See what our Experts say about this CURT Heavy Duty Receiver Hitch

• What Hitch do You Recommend for My 2012 GMC Savana Utility Van?
  Is the steel step bumper you have installed the factory bumper on your 2012 GMC Savana KUV Van?
  view full answer...
  
• Front Mounted Trailer Hitch Options For A 2024 Jeep Wagoneer
  Hi Stephen, There isn't a custom-fit front hitch available but we do offer adjustable-fit weld-on trailer hitches that you can cut to fit your frame and weld in place. We offer a variety of drops so you'll want to do a bit of measuring on your Wagoneer to figure out the best drop to fit the receiver tube either through fascia or beneath it. Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop # C99CR
  view full answer...
• Trailer Hitch Receiver Option For 2007 Ford Collins E450
  There isn't a custom fit hitch for your 2007 Ford Collins E450, so you'll need a weld-on hitch, with the right one depending on the drop you need, as well as your frame width. If the width of your frame is 44 inches or less (from outside to outside), you can use one of the following: - 3" Drop: Class V Universal Weld-on Receiver Hitch and Brackets # 15901 - 9" Drop: Class V Universal Weld-on Receiver Hitch and Brackets # C47CR For the drop, what you'll want to do is measure straight...
  view full answer...
• Trailer Hitch receiver For A 2011 Ford Expedition EL
  Hey Brian, That is correct, manufacturers do not offer a bolt-on trailer hitch receiver for 2011 Ford Expedition models. You'll have to go with a weld-on hitch and would need to measure the distance between your frame down to clear the bumper so that you can choose the correct drop: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop # C99CR
  view full answer...
• Trailer Hitch Receiver Options For A 2005 Ford E-350 School Bus
  Hi Jacob, The Curt Trailer Hitch Receiver # 14053 lists that it's a fit for cutaway chassis if the bolt holes are 38-5/8 inches from frame to frame. This would mean that the holes in your frame have to be spaced 38-5/8" from center to center in order for the hitch to work. With your vehicle be a school bus and the dimensions that you stated you'll likely have to go with a weld-on adjustable fit trailer hitch receiver. You'll want to measure the distance down from the frame to clear...
  view full answer...
• Solution for Front Mount Hitch on 2007 Dodge Sprinter 2500
  I do have a solution, but there are no custom fit options available for your 2007 Dodge Sprinter 2500. What you can use is a universal hitch like the Curt # C47CR. This is a Class V weld-on hitch so we recommend taking it to a certified welder for installation. The hitch has a 2" receiver, a 9" drop, and fits vehicle frames 18-44" wide. If you need taller brackets the # C99CR is also available with an 18" drop.
  view full answer...
• Solution for Spare Tire Carrier on 1977 GMC Motorhome
  The # TR-2 fits 4" square and 4-1/4" square bumpers. This and other carriers like it will not fit your 1977 GMC Motorhome, but I do have some other options. The first is to mount the Buyers Products Truck Spare Tire Carrier for 19-1/2" Rims or Smaller # 3375201010 on the back. This can either be bolted on (drilling will be required) or welded on. The other option is to use a hitch mounted spare tire carrier like the # e98ZR. Of course this will require you to have a trailer hitch receiver...
  view full answer...
• Will The Draw-Tite Trailer Frame Hitch Receiver Fit A 1974 Chevy K5 Blazer With A Gas Tank Shield
  The Draw-Tite Max-Frame Trailer Hitch Receiver 75129 should fit with any OEM parts but just to be used I went out to the warehouse and measured the hitch. From the back of the crossmember tube to the center of the first bolt hole is 1". The distance between the inside of both mounting ears is 30-1/4". This hitch should sit directly under your frame rails so you can use that 1" measurement to see if the tube will run into interference with your gas tank shield. If this doesn't work then...
  view full answer...
  
• Solution for Class V Hitch on 2011 Fleetwood Expedition Motorhome
  For hitch fabrication we only offer the receiver tube like the # E-11 or # C49511. You would need to take this to a local fabricator and they would be able to fashion a hitch and brackets that will fit your 2011 Fleetwood Expedition Motorhome. The other option would be to use one of the universal Class V hitches we have listed for your motorhome. We have the Curt # C47CR with a 9" drop and the Curt # C99CR with an 18" drop. Both options have a 2" receiver. The # C37CR and # C87CR are...
  view full answer...
• Trailer Hitch Receiver Fit on 1998 Chevy 3500 Cab & Chassis
  A stake body should be referring to a cab and chassis, and we do have a trailer hitch receiver that fits a 1998 Chevy 3500 cab and chassis. You just need to make sure that your frame measures 34 inches outside to outside, and if it does then the correct hitch is the Curt Trailer Hitch Receiver # C14082. If your '98 Chevy has a frame which is not 34 inches wide, you can still add a hitch, but it would need to be a universal weld-on application. The correct one would depend on the exact...
  view full answer...
• Front-Mounted Hitch Options For A 2021 Chevy Silverado 1500 3.0L Duramax
  Hi Kelly, There unfortunately are no custom-fit front mounted trailer hitches available for Diesel models of the 2021 Chevy Silverado 1500 so you would have to go with an adjustable-fit weld-on hitch and measure for the correct drop needed/check for any obstructions that could prevent fitment with the mounting brackets to the frame. We offer the following options: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop...
  view full answer...
• Recommended Hitch And Wiring For A 1971 Toyota Land Cruiser FJ40
  Hi Holly, There unfortunately aren't any custom-fit hitches confirmed to fit your 1971 Toyota Land Cruiser FJ40 so you'll have to go with an adjustable-fit weld-on trailer hitch. These come in a variety of drop lengths to help you clear the rear bumper/fascia so you'll want to measure down from the frame to see how large of a drop is needed for the receiver tube to clear. Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2"...
  view full answer...
• Trailer Hitch Option For 2017 Ram Promaster 3500 Cab & Chassis
  For your 2017 Ram Promaster 3500 cab and chassis service body, you'll need a weld-on hitch. There are three options from Curt that will work with frames that measure up to 44 inches (from outside to outside), with the only difference being the drop they provide (the distance from the bottom of the frame to the top of the receiver - 3" Drop: Curt Class 5 Universal Weld-on Hitch # 15901 - 9" Drop: Curt Class 5 Universal Weld-on Hitch # C47CR - 18" Drop: Curt Class 5 Universal Weld-on Hitch...
  view full answer...
• Option For Trailer Hitch For Holiday Rambler Motorhome
  There is possibly an option for a trailer hitch that fits your 2004 Holiday Rambler, and I say possibly because while a custom fit hitch is not available, there are universal weld-on hitches. This depends on the width of your frame from outside to outside, so if your frame measures up to 44 inches (from outside to outside), you can use any of the following. - 3" Drop: Curt Class 5 Universal Weld-on Hitch # 15901 - 9" Drop: Curt Class 5 Universal Weld-on Hitch # C47CR - 18" Drop: Curt...
  view full answer...
• Heavy Duty Trailer Hitch Receiver for 2020 E-450 Class C Motorhome
  Since there are no custom fit receivers for your 2020 E-450 motorhome you will need to use a universal hitch. The Curt Class 5 Universal Hitch # C47CR fits frames up to 44" wide. This is a weld-on hitch so we recommend taking it to a certified welder for installation. The maximum gross trailer weight of 16,000 lbs and tongue weight of 1,600 lbs is as heavy duty as it gets. Keep in mind, you will be limited by the towing capacity of your motorhome.
  view full answer...
• Recommended Trailer Hitch for a Thomas Saf-T-Liner School Bus
  The best option to add a hitch to your 2006 Thomas Saf-T-Liner School Bus is going to be the Curt Class 5 Universal Weld-on Hitch w/ Brackets item # C97CR. This is a universal hitch that fits frames from 18" to 62" wide. This is our highest rated universal hitch and it has a 20,000 lbs towing capacity. The included brackets will drop of 9" from your bus's frame. There are no custom fit hitches for your Thomas Sf-T-Liner and this is going to need to be welded to your frame for the capacity...
  view full answer...
• Recommended Trailer Hitch For A Foreign Model 2020 Ford Ranger FX4
  Hi Drew, The Curt # C97JR you were looking at is designed to fit select model Jeep Grand Cherokee L's and would not be a fit for your 2020 Ford Ranger. All of the custom-fit hitches we currently offer are designed for US models so you'd have to go with an adjustable-fit weld-on trailer hitch instead. These will come with a drop so you'll want to measure from the frame down to make sure the receiver tube will clear the bumper. Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3"...
  view full answer...
• Hitch For 1993 Ford E-350 RV With 42 Inch Frame
  Thanks for the frame dimensions, and while there are hitch options for your 1993 Ford E-350 RV, I checked with the hitch manufacturers and there are no custom fit options. So what that means is in order to add a hitch to your RV, you would need a universal weld-on hitch. There are three different options, with each of them being Class V hitches with a 2 inch receiver, and fit frames that are between 18 inches and 44 inches wide, so they will fit your '93 E-350's 42 inch frame. The difference...
  view full answer...
• Receiver Hitch for 2007 Newmar Class A Motorhome on Spartan Chassis
  While we do not have a custom fit option for a 2007 Spartan Chassis we do have several options of universal fit. Please note the attached link to the filtered options and let me know what follow-on questions you have. You will need to make measurements to identify which available option fits best, measure from inside the frame beam to the inside of the other frame beam to get the frame width. If you have, for example, a width of 18-44" then I recommend the Curt Class 5 Universal Weld-on...
  view full answer...
• Heavy Duty Hitch For 2013 Coachmen Leprechaun Class C
  I have a solution for you. I see a couple of options, you can go with the Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop # 15901. It is a weld-on hitch with a Gross Trailer Weight (GTW) of 15,000 pounds and a Tongue Weight (TW) of 1,500 pounds Or we have the Curt Class 5 Universal Weld-on Hitch w/ Brackets # C47CR. This is a weld-on hitch with a GTW of 16,000 pounds and TW of 1,600 pounds. You will also need the brackets with this one. We have the 7" Weld-On Bracket...
  view full answer...
• Recommended Trailer Hitch Receiver For A 1999 Toyota Prado RHD
  Hi Colin, Since there isn't a confirmed fitting custom-fit hitch for a 1999 Toyota Prado RHD the only option would be to install a weld-on adjustable-fit trailer hitch. We haven't had a Prado in to test it for a fit with a 4Runner trailer hitch unfortunately. We have a few different sizes depending on the drop you'll need to clear the rear fascia: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop...
  view full answer...
• Option For Heavy-Duty Hitch on Motorhome
  Since there isn't a custom-fit option for your motorhome, the only possible option for a heavy-duty hitch would be a universal, weld-on type. There are three options from Curt for frames that measure up to 44 inches (from outside to outside), with the only difference being the drop they provide (the distance from the bottom of the frame to the top of the receiver - 3" Drop: Curt Class 5 Universal Weld-on Hitch # 15901 - 9" Drop: Curt Class 5 Universal Weld-on Hitch # C47CR - 18" Drop:...
  view full answer...
• Trailer Hitch Option For Shuttle 2011 Chevy Express Shuttle Bus
  For a shuttle bus like your 2011 Chevy Express, you'll need a universal hitch that will be welded onto your frame. You will want to measure your frame though, as it will need to be no longer than 44 inches from outside to outside. So long as you have that, you can use one of the following, depending on how tall you need the brackets to be: - 3" Drop: Curt Class 5 Universal Weld-on Hitch # 15901 - 9" Drop: Curt Class 5 Universal Weld-on Hitch # C47CR
  view full answer...
• Trailer Hitch Receiver and Wiring Harness Recommendation For a 1969 GMC P15 Van
  The Curt Trailer Hitch Receiver # C13900 looks to be the closest bolt on receiver that I can find to fit your 1969 GMC P15 van. It has a 6-7/8" drop from the frame to top of the receiver so that may require you to notch into your bumper slightly. I recommend the Curt Class 5 Universal Weld-on Hitch w/ Brackets # C47CR. With this you will be able to place the receiver tube exactly where you want on the rear bumper. This will allow you the best ground clearance without having to modify...
  view full answer...

Do you have a question about this Heavy Duty Receiver Hitch?