1. Heavy Duty Receiver Hitch
  2. Draw-Tite
  3. 2 Inch Hitch
  4. 16000 lbs GTW
  5. Class V
  6. 16 Inch Drop
Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2"

Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2"

Item # 41990-16
lowest price pledge
Retail:$446.81
Our Price: $346.53
You Save: $100.28
Heavy Duty Receiver Hitch
This item qualifies for Free Shipping
Shipping Weight: 81 lbs
Quantity: 
In Stock
41990-16 - 44 Inch Wide Draw-Tite Heavy Duty Receiver Hitch
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Universal-fit trailer hitch fits heavy-duty and commercial vehicles with frames up to 44". Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. 16" Tall, weld-on mounting brackets included. Call 800-298-1624 to order Draw-Tite heavy duty receiver hitch part number 41990-16 or order online at etrailer.com. Free expert support on all Draw-Tite products. Guaranteed Lowest Price and Fastest Shipping for Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2". Heavy Duty Receiver Hitch reviews from real customers.
  • All Info
  • Reviews (66)
  • Q & A (108)
  • Photos
  • Why etrailer?

Draw-Tite Heavy Duty Receiver Hitch - 41990-16

  • 2 Inch Hitch
  • 16000 lbs GTW
  • Class V
  • 16 Inch Drop
  • Draw-Tite
  • Weld-On Hitch
  • 1600 lbs TW
  • 44 Inch Wide

Universal-fit trailer hitch fits heavy-duty and commercial vehicles with frames up to 44". Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. 16" Tall, weld-on mounting brackets included.


Features:

  • Universal-fit trailer hitch lets you tow a trailer with your heavy-duty or commercial vehicle
    • Designed for full-size trucks with long wheel bases and heavy-duty suspensions
  • Computer-aided steel construction ensures strength and durability
  • Oversize safety-chain loops are easy to access
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Weld-on installation with included side brackets
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Cross tube dimensions: 44" wide x 3" deep x 3" tall
  • Bracket height: 16"
  • Receiver opening: 2" x 2"
  • Rating: Class V
    • Maximum gross trailer weight: 16,000 lbs
    • Maximum tongue weight: 1,600 lbs
    • Not for use with weight distribution systems
  • Limited lifetime warranty




Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.



etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



41990-16 Draw-Tite Ultra Frame Service Body Receiver with 16" Bracket - Universal - Class V - 2"

Installation Details 41990-16 Installation instructions


California residents: click here



Customer Reviews

Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" - 41990-16

Average Customer Rating:  4.9 out of 5 stars   (66 Customer Reviews)

Universal-fit trailer hitch fits heavy-duty and commercial vehicles with frames up to 44". Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. 16" Tall, weld-on mounting brackets included.

- 41990-16
by:

Great product. Welded it on an M923 military truck to be able to haul conventional trailers and with a receiver pintle hitch I can haul any military trailer, big or small. Thanks.



- 41990-16
by:

This hitch is exactly what is needed for hauling something that requires a receiver hitch behind a class 8 tractor. I tow my Tracker behind the tractor to take it to service unhook, go home, and return to pick up finished repair. No more double trips.



- 41990-16
by:

A+ product, works as intended. Super thick mounting brackets.


Comments
Works as intended for custom installation
cody b - 12/20/2020


- 41990-16
by:

The hitch was a replacement for my Motorhome but had to return because it wouldn't fit the frame due to little room. The hitch arrived quickly which gives me the opportunity to determine my next step. The hitch is exactly as described and well made. The folks at etrailer were great and very helpful making the return easy. Thanks again.



- 41990-16
by:

Incredibly fast shipping. Very pleased with the product. It appears to be well built and solid. Very happy customer. I would recommend this hitch in a heartbeat!



- 41990-16
by:

Hitch showed up on time. It’s very heavy duty. etrailer rep helped out with some questions. etrailer honored a price match guarantee. Everything went great.



- 41990-16
by:

The hitch receiver is very stout, the welds look good, the finish is rugged. Very solid.


Comments
Im still pleased with this hitch. The finIsh had held up well.
Rob B - 01/06/2018



- 41990-16
by:

very heavy duty looking , have no worries that it won't work for a long time. Wished the truck it's going on came as fast.


Comments
install was easy ,strongest hitch ever bought very happy!
Tony - 03/09/2019



- 41990-16
by:

Great quality, very heavy duty, multiple mounting options depending on your application. this receiver was a great value



- 41990-16
by:

Great everything that is needed to make it fit my work truck and make it stronger in the towing area where it was lacking



- 41990-16
by:

Excellent product. Strong and worked great for my application.



- 41990-16
by:

Super fast shipping, great products and support.



- 41990-16
by:

Product as described with prompt delive ry



- 41990-16
by:



- 41990-07
by:

Review from a similar Draw-Tite Service Body Hitch Receiver in Heavy Duty Receiver Hitch


I purchased a class c motor home and found out after the purchase that the trailer hitch was only for supporting a basket up to 150 lbs. I needed a REAL trailer hitch. Etrailer.com sent me a wonderful hitch - the fabricator that installed it was very pleased with it, it pulls my truck with no worries, it was a reasonable price and came within a week of ordering. I love it, just what I needed - Thank you


Comments
It is a blessing. Very good product. Thank you still
Traci B - 06/17/2021


- 41990-07
by:

Review from a similar Draw-Tite Service Body Hitch Receiver in Heavy Duty Receiver Hitch


The trailer hitch from eTrailer arrived quickly. It is a robust hitch with plenty of towing capacity. I have a GMC box truck and will be using it to tow a utility trailer from New York to Arizona. Tow hitches for box trucks are hard to find. This one has a tow capacity of 16,000 lbs. I am pleased with the quality of the unit. I will gladly recommend eTrailer to others.


Comments
Excellent
John - 12/23/2020


- 41991-16
by:

Review from a similar Draw-Tite Service Body Hitch Receiver in Heavy Duty Receiver Hitch


I installed this on a custom pickup build from a 1956 Chevrolet 6500 fuel truck. It fit the frame perfectly, the hitch height was perfect at 17". I only had to drill the frame holes, cut the crossbar to size, weld and paint. Easy peasy.



- 41990-07
by:

Review from a similar Draw-Tite Service Body Hitch Receiver in Heavy Duty Receiver Hitch


Hi I’ve received the hitch but didn’t have time to get it install. Etrailer was very helpful with all the question I have, there support team was great. THANK YOU



- 41990
by:

Review from a similar Draw-Tite Service Body Hitch Receiver in Heavy Duty Receiver Hitch


Bought this hitch for a custom application. WAY OVERKILL for what I needed but better to over engineer it than under. This baby is capable of towing 16000 lbs with a tongue weight of 1600 lbs. I will never tow more than the 5000 lbs my coach is rated for but I needed it to extend out and be a bit lower than the standard hitch to carry my KLR 650 on a rack which comes in at about 525 lbs.



- 41991
by:

Review from a similar Draw-Tite Service Body Hitch Receiver in Heavy Duty Receiver Hitch


This is a tremendous hunk of steel, extremely well-made of high quality steel with perfect Welds. As you can see in the picture I customized this bar to fit right in the bumper. That is truly strong enough to be a bumper, Or even a crossmember to a custom vehicle. This is not a bolt up item. Be careful unless you're putting this on a large truck, The capabilities of this trailer hitch will generally far exceed that of your average vehicle. And of course etrailer is the best place to get it, good luck.



- 41990-07
by:

Review from a similar Draw-Tite Service Body Hitch Receiver in Heavy Duty Receiver Hitch


Hitch came on time and was easy to install being a weld on hitch. Was a good choice for my flatbed as the truck has a frame extension on it from a service box which meant a factory type hitch was not a option. Looking forward to using it more and not having to worry about hitch failure.



- 41990-07
by:

Review from a similar Draw-Tite Service Body Hitch Receiver in Heavy Duty Receiver Hitch


etrailer's staff was very helpful in evaluating options for my situation. This hitch works perfectly with my Class C Motor home (RV)



- 41990-07
by:

Review from a similar Draw-Tite Service Body Hitch Receiver in Heavy Duty Receiver Hitch


Worked perfectly on a 3500 mile cross country trip. No issues at all towing an 87 Bronco.



- 41990-07
by:

Review from a similar Draw-Tite Service Body Hitch Receiver in Heavy Duty Receiver Hitch


The hitch is well built. Having 4 wheel drive it gave me the flexablity I needed to mount to the front of my motorhome. I use to carry my cooler rack for surf fishing.



- 41991-07
by:

Review from a similar Draw-Tite Service Body Hitch Receiver in Heavy Duty Receiver Hitch


This receiver is by-far the strongest setup I've ever seen. Its really simple too. The end plates do not come attached to the receiver bar. The installation of the end plates involves either drilling the frame and installing bolts through the end plates, or welding the end plates directly to the frame. Then you slide the receiver bar through the end plate, slide it back through the other end plate, center it where you want it and weld the end plates to the receiver bar. The only thing I might find fault with is the end plates are not tall, so the application needs to be no more than 24-28 inches above ground level unless the end user intends to use a drop-hitch. Overall, it's the strongest hitch I've ever seen.


Comments
Fantastic! Its so strong Weve decided to add a spare tire mount and a spare that weighs about 100 lbs.
Don - 03/03/2019

Thanks for the follow-up. Just a little word of caution, I am not sure how big the trailer that you are towing but please be aware that your spare tire mount and tire's 100 pounds would add to the tongue weight of this hitch, and you will want to make sure that you are within the 1,600 pounds of maximum tongue weight this is rated for.

-- Etrailer Expert Rachael H - 3/4/2019

38
81
Show More Reviews

Ask the Experts about this Draw-Tite Heavy Duty Receiver Hitch

  • How To Install Trailer Hitch Receiver On 1996 Toyota HiAce
    I may have an option for you, but at this time there is not a custom fit trailer hitch receiver confirmed to fit your 1996 Toyota HiAce. The only option to add a trailer hitch receiver to your vehicle is using a universal trailer hitch receiver like the Draw-Tite # 41990-07 with 7" mounting brackets or # 41990-16 with 16" mounting brackets. The included brackets will need to be bolted or welded to the frame of your HiAce, and offers a 1600lb tongue weight rating and 16000lb trailer weight...
    view full answer...
  • Dimensions of the Mounting Brackets for the Draw-Tite Ultra Frame Service Body Hitch Receiver
    I have attached a photo showing what the distance is between the bolt holes and the dimensions of the mounting brackets for the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-16 that you can reference. The installation instructions have also been linked for you to check out.
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch for an International 3800 School Bus
    The best trailer hitch option we have for an International 3800 School Bus is the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-16. This hitch is a great option as it can be bolted-on (once drilled) or welded, the brackets can also be adjusted to get a snug fit on the bumper. It sounds like you are looking for something that will match up with the existing holes but that simply won't be an option, they don't have any true bolt-on hitches for this application...
    view full answer...
  • Recommended 2 Inch Trailer Hitch for Peterbilt Semi
    Yes, the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-16 is designed specially for the purpose of attaching to larger frame vehicles like a semi so this will work perfectly for you. The Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver can either be bolted or welded or both for that matter. I know you said you were looking for class III or class IV but there are not really any good options for these which is why you will want to go with the above class...
    view full answer...
    Image 1 for
  • Will Trailer Hitch Fit 2014 Freightliner Cascadia
    There might be a universal, weld-on trailer hitch that fits your 2014 Freightliner Cascadia but it will depend on the width of your truck's frame. So long as the frame is no larger than 44 inches you can use the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-16 which is a weld-on hitch that has 16 inch brackets. It has a 16,000 lb weight capacity and 1,600 lb tongue weight capacity. If your hitch is up to 61 inches another weld-on option is the Curt # 15903 which has...
    view full answer...
  • Recommended Trailer Hitch for International 4700
    The best trailer hitch option we would have for an International 4700 is the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-16. This hitch would indeed need to be either bolts or welded to the frame. The long brackets would then be able to get you the desired receiver tube height to tow standard trailers.
    view full answer...
  • Possible Hitch to Fit 1995 Chevrolet P30
    Your 1995 Chevrolet P30 is the type of vehicle that the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-16 was intended for. This is a multi-fit hitch that comes with brackets that allow it to drop down 16 inches to clear the lower bumper of your van. As long as your frame is less than 44 inches wide this hitch could be made to fit since it's a universal design. We have a version of this with shorter drop brackets as part # 41990-07 which has 7 inches of drop instead.
    view full answer...
  • Recommended Trailer Hitch for Shuttle Bus On Ford E-350 Chassis
    The best option I have for you to add a trailer hitch to your shuttle bus is with the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-16 which has the Class V rating that you are after. In regards to installation, this will be up to you as it is a universal trailer hitch and there is not a custom fit one available for your application. So long as your frame rails do not sit more than 44" apart inside to inside the Draw-Tite Ultra Frame Service Body Trailer Hitch...
    view full answer...
  • 1993 Chevrolet P30 Trailer Hitch Option
    For an RV application the # 41990-16 is an option as this is a great multi-fit hitch typically used for service body trucks. Since we know that the P30 chassis has 34 inches between the frame rails this hitch should fit just fine since it has 16 inch drop brackets that can weld anywhere on the 44 inch wide crossbeam of the hitch. If you needed a hitch with less drop in the mounting brackets the part # 41990-07 has a bracket height of 7 inches instead.
    view full answer...
  • What Heavy-Duty Trailer Hitch Receiver Will Fit 1993 Fleetwood RV With Chevy P30 Chassis
    The Reese Trailer Hitch, # 41940, is designed for Chevy, Ford and Dodge 34 inch frames. To make sure it will fit your Chevy P30 chassis, you want to make sure that you measured from inside of the C-channel frame rail to the inside of the C-channel frame rail on the other side and see if it measures 34 inches. Also this heavy duty hitch has a gross towing weight of 15,000 lbs. and a tongue weight of 1,500 lbs., but you do have to remember that the weight you can tow is limited to what...
    view full answer...
  • Is Draw-Tite Ultra Hitch part 41990-16 an Adjustable Width Hitch for Motor Homes
    The Class IV Weld-On 44 Inch Hitch, part # 41990-16 is not adjustable. However, we do carry such hitches. You could use hitch part # 41991 if you need wider than 44 inches and if you need a more narrow setup, you could use part # 41990. You would then use either 7 inch tall hitch brackets part # 4907 or 16 inch tall brackets part # 4916, depending on far below the frame you need the hitch to sit.
    view full answer...
  • Recommended Trailer Hitch for a 1990 GMC R3500
    I do have an option for you but I checked with all of the aftermarket trailer hitch manufactures and none of them offer a custom fit trailer hitch for a 1990 GMC R3500. As you have come to find out, the trailer hitch for a 1990 GMC C/K 3500 will not fit. Therefore, your only option is a universal trailer hitch for which I recommend using the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-16. The Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver has a...
    view full answer...
  • Recommended Trailer Hitch for a Isuzu Box Truck
    Yes, the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-16 is exactly what you are looking for as it has very tall side brackets which will be more than enough to get the receiver tube down under the rear bumper, adjustable width up to 44", and a class v 16,000 lb weight capacity. The side brackets can be further modified to sit directly under the bumper if you desire for a better overall look. Please note, there are no custom fit options for your vehicle which...
    view full answer...
  • Recommended Trailer Hitch Receiver for 1998 Stewart and Stevenson m1078
    For your 1998 Stewart and Stevenson m1078, I recommend the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" # 41990-16. This trailer hitch receiver will allow you to add a hitch as long as your frame is no wider than 44 inches. This hitch has 16 inch tall weld-on mounting brackets so you can determine the correct height for your truck. This hitch receiver is rated for 16k towing and tongue weight of 1600 lbs max. It is not for use with weight distribution...
    view full answer...
  • Trailer Hitch Receiver Option For 2016 Isuzu NPR
    Your 2016 Isuzu NPR will need a weld-on trailer hitch, and there are a couple of options from Draw-Tite, which is the same manufacturer as Reese hitches. Based on my research, a '16 NPR has a 33-1/2 inch chassis width, so you can choose from either of the following options, with the difference being their bracket height, depending on how much drop you need. - 7" Tall Brackets: Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 - 16" Tall Brackets: Draw-Tite Ultra...
    view full answer...
    Image 1 for
  • Class V Trailer Hitch Receiver for a 2005 Fleetwood Tioga 29V
    In order to maximize the full tongue weight capacity of your 2005 Fleetwood Tioga 29V which is on a Ford E-450 chassis, I recommend using a Class V hitch like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-16 for 16" tall brackets or part # 41990-07 for 7" tall brackets which both have a tongue weight capacity of 1,600 lbs and should be more than enough for your two dirt bikes and carrier. Either hitch would require modification in order to be bolted or welded...
    view full answer...
  • Trailer Hitch for 2011 Ford F-650 Ambulance
    I do have an option for you, however there are not any custom fit trailer hitches available that will work for your 2011 Ford F-650 Regular Cab 2WD DRW Ambulance. The only type of hitch that will work is a universal, weld-on design like the Draw-Tite Ultra Frame # 41990-16. The cross tube on this hitch is 44 inches wide. For a wider, 62 inch cross tube, you can use # 41991-16. Both of these trailer hitches have a gross trailer weight capacity of 16,000 lbs. If you do not feel comfortable...
    view full answer...
  • Recommended Universal Trailer Hitch Receiver For 2000 Ford E-450 Shuttle Bus
    Thank you for the picture! Since your 2000 Ford E-450 Shuttle Bus does not have any custom fit trailer hitch receiver options, you will need to have one of the following universal trailer hitch receivers fabricated to fit your vehicle. The most likely two options are the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-16 as long as your vehicle's frame is not more than 44" wide measured inside to inside, or the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch for Ambulance on Ford Chassis
    I do have an option for you but ambulances are built on an E-Series chassis, none of the trailer hitch options for this application have the needed receiver tube drop. Therefore, I recommend Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-16 which is a universal hitch that can be made compatible.
    view full answer...
  • Determining Which Heavy Duty Receiver Fits 2009 Isuzu NPR W/ Dump Bed
    There are a few options that may fit your 2009 Isuzu NPR with a dump bed, but there are no options that are confirmed to fit. The Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumper with 2" Receiver # 3371809055 is designed to fit trucks with a 34" wide frame and will need to welded and bolted to the frame. This hitch plate has a 17000lb trailer weight rating, and the 2" receiver tube you were looking for. Another possible option is the # 41990-16 as it has 16" tall brackets,...
    view full answer...
  • Trailer Hitch Recommendation for a 1989 Prevost Bus
    For a trailer hitch that you should be able to use on your 1989 Prevost Bus, I recommend taking a look at the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-16 or part # 41990-07. These trailer hitches are both universal meaning you can modify the mounting brackets to fit the frame rails on your bus and then bolt or weld them into place. This will be the only option we have for you as they do not make a custom bolt-on trailer hitch for your application. For a...
    view full answer...
  • Recommended Trailer Hitch Receiver For 1967 Oldsmobile Cutlass Supreme 442
    I have an option that may work for you, but there is not a custom fit trailer hitch receiver that is confirmed to fit your 1967 Oldsmobile Cutlass Supreme 442. Instead you will need to use a universal hitch like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" # 41990-16 and custom fit the brackets to your vehicle. Another option would be to start with the Gen-Y Weld-On 2" Receiver Tube - 12" Long - Steel # 325-GH-003 and have a qualified welder...
    view full answer...
  • Hitch & Ball Mount Ground Clearance When Towing with 2013 Mercedes-Benz Sprinter
    There is no specific law regarding minimum clearance between the ground and the bottom of a trailer hitch receiver tube or ball mount. This is because there are so many factors that will affect this dimension. The vehicle itself may simply have a low stance, as do some minivans. Passenger load, cargo load, tire size, tire condition and inflation pressure also affect the ground clearance at the hitch tube, as does the condition of the vehicle's suspension. Naturally you want to avoid any...
    view full answer...
  • Recommended Heavy Duty Trailer Hitch Receiver For GMC Thomas Built School Bus
    We have had questions about installing a Heavy Duty Trailer Hitch Receiver on a GMC Thomas Built School Bus. Since there are not any custom fit trailer hitch receivers for the Thomas Built School Bus you will need to use a universal hitch like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V # 41990-16 which fits frames up to 44" wide. The # 41990-16 has a 1600lb tongue weight rating, and a 16000lbs trailer weight rating but you will want to verify...
    view full answer...
  • Recommended Trailer Hitch Receiver For A 2002 Ford E-450 Shuttle Van
    For your 2002 Ford E450 Shuttle Van I recommend the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" # 41990-16. This trailer hitch receiver has a 16" drop and is rated for 16000lbs GTW and 1600lbs TW. This universal-fit trailer hitch will need to be welded to the frame of your vehicle. If you're in need of a trailer connector then I recommend the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires # ETBC7....
    view full answer...
  • Thickness of Side Plates on the Class IV Weld-on 44" Wide Ultra Frame Trailer Hitch Receiver
    The thickness of the side plates of the # 41990-16 measures 3/8 of an inch. The side brackets are designed to provide 16 inches of drop from the frame it gets welded to. But depending on where you weld the hitch this dimension could be different from that.
    view full answer...
  • Can Draw Tite Service Body Hitch 41990 Fit Ambulance Build on 2007 Chevy Express
    For what you are trying to do a fabrictor is going to be your only option for safe install. What I would recommend is take the cross tube part # 41990 to a qualified fabricator in your area and tell him what you are looking to do and he will come up with a way to install the hitch at the exact height you are looking for.
    view full answer...
  • Recommended Trailer Hitch Receiver For 1991 International 4700 W/ Low Profile Chassis
    I do have an option for you, but there is not a custom fit trailer hitch receiver option for your 1991 International 4700 with a low profile chassis. Based on the picture you provided your truck appears to be pretty low to the ground and the 16" tall brackets the Draw-Tite Universal Hitch # 41990-16 has would more than likely put the hitch too low. Instead the Draw-Tite # 41990-07 would be a better option as it only has 7" tall mounting brackets. The brackets can be trimmed to get...
    view full answer...
    Image 1 for
  • Recommendations For Trailer Hitch On A 1998 Ford E-450 RV Cutaway
    To find a trailer hitch that will work well on your Cutaway I recommend a weld-on trailer hitch. You will need to take a measurement to make sure you have clearance. You will need to measure the distance between the frames to make sure it is less than 44-inches. You then need to measure from the top of the frame downward to the bottom of the bumper or step bumper if that is what you have, to make sure the receiver opening clears it. If that distance is 5-9/16 inches or less, then...
    view full answer...
  • Trailer Hitch Receiver for Utility Truck on 2015 Ford E-450 Cab and Chassis
    For your 2015 Ford E-450 cutaway you will need a frame mount hitch like the Draw-Tite Trailer Hitch Receiver # 41990-16 or # 41990-07. The difference being the # 41990-07 has a bracket height of 7 inches and the # 41990-16 is 16 inches.. Both hitches are 44 inches wide and have a maximum gross trailer weight of 16,000 pounds. For trailer wiring you can use the Hopkins Wiring Harness # HM11140495. This will provide you a 4-way connector. If you need a 7-way you can then add the # ETBC7.
    view full answer...

Do you have a question about this Heavy Duty Receiver Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality heavy duty receiver hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate heavy duty receiver hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Patrick B
Expert Research:
Patrick B
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jeff D
Installed by:
Jeff D
Employee Adele M
Updated by:
Adele M
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.