1. Home
2. Towing
3. Heavy Duty Receiver Hitch
4. CURTx

The overall width of the Buyers Products Class 4 Service Body Long Hitch Receiver #3371801055 that you referenced 44-1/2 inches. I attached a picture that has that dimension and a few others listed as well.

Hi Arii; the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver #41990-16 is exactly what you need to add a hitch to your 2019 Volvo VNL Semi. This is a weld-on hitch so we recommend taking it to a certified welder for installation.

Hello Thorsten, thanks for reaching out. I do have an option for you, but unfortunately there are no custom fit hitches for the cutaway models of the 2002 Chevy express van. The only option is going to be a universal hitch like the Draw-Tite Ultra…

...I do have an option for you but the Curt Trailer Hitch Receiver part # C15800 is designed for passenger vehicles like the Ram 3500, Chevrolet Silverado 3500, and GMC Sierra 3500 so it will not fit...

The best trailer hitch option we have for an International 3800 School Bus is the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part #41990-16. This hitch is a great option as it can be bolted-on (once drilled) or welded, the brackets can…

...it is rated for 6,000 lbs with weight distribution just like the Curt # C13701. If you are needing a weight distribution system for this hitch receiver you likely will need a system rated for 15% of your total...

Yes, the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part #41990-16 is exactly what you are looking for as it has very tall side brackets which will be more than enough to get the receiver tube down under the rear bumper, adjustable…

...I have a solution for you that I can provide, but we aren't going to have a custom fit hitch to fit a vehicle like what you referenced. I spoke to my contacts at Curt and Reese and the only styles...

The width of the tab you marked in your picture is 2.9" and the height is 6.32". I have attached the full dimensional drawing of the #3371809065 below for your reference.

The 7" drop on the #4907 and 16" drop on the #4916 are measured from the top of the bracket to the center of the cross tube on the #41990. See the diagrams below. If you don't want to use either of these brackets you could also take the…

The Draw-Tite Universal with the 7" Tall Brackets #41990-07 or 16" Tall Brackets #41990-16 are some of the better options for your 2014 Isuzu NPR. The height brackets you will need will depend on what kind of up-fit your vehicle had done to…

I have attached a photo showing what the distance is between the bolt holes and the dimensions of the mounting brackets for the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver #41990-16 that you can reference. The installation instructions…