Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop

See what our Experts say about this CURT Heavy Duty Receiver Hitch

• Class V Trailer Hitch Receiver Rated For 15,000LBS That Will Fit a Frame With Mounting Holes 31.75
  I recommend the Class V Universal Weld-on Receiver Hitch # 15901 as I cannot locate a custom fit receiver with those measurements. This receiver will fit frame widths from 18" to 43.88" and has the maximum trailer weight rating of 15,000lbs and maximum tongue weight of 1,500lbs.
  view full answer...
• Availability of a Trailer Hitch for a 1956 Chevrolet 210 Townsman Station Wagon
  None of our hitch suppliers offers a bolt-on custom-fit trailer hitch receiver of any size for your (awesome!) 1956 Chevy 210 Townsman Station Wagon. Your one option is a universal-fit RV-type hitch, such as the Curt # 13703. Please keep in mind that you will be on your own in terms of determining proper fit. Also, since this will be an untested application your actual tongue weight and towing capacities will be unknown. The vehicle itself may have different capacities than the hitch....
  view full answer...
• Trailer Hitch Option For Shuttle 2011 Chevy Express Shuttle Bus
  For a shuttle bus like your 2011 Chevy Express, you'll need a universal hitch that will be welded onto your frame. You will want to measure your frame though, as it will need to be no longer than 44 inches from outside to outside. So long as you have that, you can use one of the following, depending on how tall you need the brackets to be: - 3" Drop: Curt Class 5 Universal Weld-on Hitch # 15901 - 9" Drop: Curt Class 5 Universal Weld-on Hitch # C47CR
  view full answer...
• Hitch Options For Older Ambulance
  There may be an option for a hitch for your older ambulance, and you are correct you will need a universal hitch that is welded on. There are three options from Curt that will work with frames that measure up to 44 inches wide (from outside to outside), with the only difference being the amount of drop they give you from the bottom of your frame: - 3" Drop: Curt Class 5 Universal Weld-on Hitch # 15901 - 9" Drop: Curt Class 5 Universal Weld-on Hitch # C47CR - 18" Drop: Curt Class 5 Universal...
  view full answer...
• Recommended Hitch for a 2022 Forest River Georgetown 31L5
  I have a hitch that will work great for your Forest River Georgetown but the Curt item # C14082 will not fit. It's designed for a bunch of Ford and GM trucks built from 1963-1997. For your motorhome on a 2021 Ford F53 chassis, I recommend the Curt Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop item # 15901. There are no custom fit hitches for your motorhome so you will need to use a universal one. This will be a solid upgrade! The Curt item # 15901 has adjustable...
  view full answer...
• Heavy Duty Trailer Hitch For 2009 Ford E450 Cutaway
  No but you can use a universal hitch as there are no custom fits. For a Class V hitch that you can bolt or weld onto your frame that is 42 inches from outside to outside you can use one from Draw-Tite: - Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 Or for a weld-on only you can use the Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop # 15901.
  view full answer...
• Will The Draw-Tite Trailer Frame Hitch Receiver Fit A 1974 Chevy K5 Blazer With A Gas Tank Shield
  The Draw-Tite Max-Frame Trailer Hitch Receiver 75129 should fit with any OEM parts but just to be used I went out to the warehouse and measured the hitch. From the back of the crossmember tube to the center of the first bolt hole is 1". The distance between the inside of both mounting ears is 30-1/4". This hitch should sit directly under your frame rails so you can use that 1" measurement to see if the tube will run into interference with your gas tank shield. If this doesn't work then...
  view full answer...
  
• Recommended Trailer Hitch for RV with 2001 Ford F-53 Chassis
  I may have a solution for you, however we do not currently offer any custom-fit trailer hitches for the 2001 Ford F-53 Chassis on your motorhome. Our available selection of trailer hitches designed for RVs and motorhomes are all Class III hitches. In order to upgrade, I recommend looking at a Universal Weld-On Heavy Duty Hitch like the Curt # 15901. This is a Class V trailer hitch that can fit frames from 18 inches up to almost 44 inches using the adjustable side brackets. This will offer...
  view full answer...
• Trailer Hitch Recommendation for a 2003 Coachmen Mirada on a Ford Chassis
  We may have a trailer hitch that will work with your 2003 Coachmen Mirada, however the Curt Custom Fit Class V Trailer Hitch, # C14048, that you referenced will not fit Class A motor homes. Before installing a Class V trailer hitch on your Mirada, I recommend checking your owners manual or with an RV dealer to determine the towing capacity of your motor home. Most motor homes do not have high towing capacities, so a Class V hitch may be overkill. Our Class V trailer hitches are universal...
  view full answer...
• Front Mount Hitch Receiver for a 2018 Chevy Express Van
  For your application I recommend checking out a universal hitch receiver like the Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop # 15901 as there aren't any custom fit front hitches for your 2018 Chevy Express Van. Since this is universal you'll basically be comparing this hitch to the available room on your vehicle and making sure everything matches up on your end. I'm attaching a dimensional photo of this Curt hitch for you to reference and use for checking the fitment.
  view full answer...
  
• Trailer Hitch for Ambulance on 2000 Ford E450 Cutaway Van Chassis
  We don't offer a custom hitch for the 2000 E450 Cutaway, because the configuration of the back bumper in regards to the frame members is different than the cargo van. You'll need a weld-on universal hitch, like part # 15901. The hitch has a 3 inch drop, which means that in order for it to fit on your ambulance, the vertical distance between the the underside of the frame member and the bottom of the bumper needs to be less than 3 inches, or the bumper will be in the way of the receiver...
  view full answer...
• 2010 Ford E450 Based Motorhome Yellowstone GulfStream Class V Hitch
  I've spoken to Curt on your behalf and there is no bolt on hitch for your 2010 E450, but you can use the Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop # 15901. You will need to weld it on to your frame. This hitch has a maximum gross trailer weight of 15,000 lbs and a maximum tongue weight of 1,500 lbs. It has a 3 inch drop which you may want more. Here is the same hitch but it has almost a 11 inch drop # 15902. To make sure that your racecar trailer will not exceed...
  view full answer...
• Highest Rated Trailer Hitch Receiver for a 2003 Ford E-450
  I do have an option for you but the 2003 Ford E-450 is a cab and chassis model to which our aftermarket manufacturers do not test/designed their hitches for. In addition to this we do not offer a Class VI trailer hitch receiver. Therefore, the best option I can offer you is the Class V Universal Weld-on Receiver Hitch and Brackets part # 15901. This hitch has a Class V rating with a 2" receiver tube opening. It fits frame rails spaced between 18" and 43" apart therefore will work well for...
  view full answer...
• Class V Hitch With Drop For 34 Inch Frame Rails on Custom Truck
  We definitely have some options that will work for you, though in regards to the specific hitches you asked about, the Curt Trailer Hitch Receiver # C15300 is 36 inches between the bolt holes, while the Curt Trailer Hitch Receiver # C15410 measures 34 inches between the bolt holes. So neither is going to fit 34 inch wide outside-to-outside frame rails, which makes sense as these are custom-fit hitches. What you can use instead is a universal weld-on hitch that doesn't require that specific...
  view full answer...
• Front-Mounted Hitch Options For A 2021 Chevy Silverado 1500 3.0L Duramax
  Hi Kelly, There unfortunately are no custom-fit front mounted trailer hitches available for Diesel models of the 2021 Chevy Silverado 1500 so you would have to go with an adjustable-fit weld-on hitch and measure for the correct drop needed/check for any obstructions that could prevent fitment with the mounting brackets to the frame. We offer the following options: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop...
  view full answer...
• Recommended Hitch And Wiring For A 1971 Toyota Land Cruiser FJ40
  Hi Holly, There unfortunately aren't any custom-fit hitches confirmed to fit your 1971 Toyota Land Cruiser FJ40 so you'll have to go with an adjustable-fit weld-on trailer hitch. These come in a variety of drop lengths to help you clear the rear bumper/fascia so you'll want to measure down from the frame to see how large of a drop is needed for the receiver tube to clear. Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2"...
  view full answer...
• Recommended Trailer Hitch for RV on 2013 Ford F-53 Chassis
  I do have a solution for you, however we do not currently offer a custom-fit trailer hitch for the 2013 Ford F-53 Chassis on your RV. I recommend looking at the Curt Class V Universal Weld-On Receiver Hitch # 15901. This hitch features adjustable side brackets that can slide along the hitch body to match exactly the width of your vehicle frame. The brackets fit frames from 18 inches to to almost 44 inches. This has a gross towing weight of 15,000 pounds, although you will need to check...
  view full answer...
• Front Mounted Trailer Hitch Options For A 2024 Jeep Wagoneer
  Hi Stephen, There isn't a custom-fit front hitch available but we do offer adjustable-fit weld-on trailer hitches that you can cut to fit your frame and weld in place. We offer a variety of drops so you'll want to do a bit of measuring on your Wagoneer to figure out the best drop to fit the receiver tube either through fascia or beneath it. Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop # C99CR
  view full answer...
• Best Class V Trailer Hitch Receiver for a Bluebird Bus
  We do have a Class V trailer hitch receiver that will fit the frame rails of your 2009 Bluebird bus, although they are all weld-on applications as there isn't an option for a heavy-duty hitch that is bolt-on. The options are either a 3" drop or a 7" drop: - 3" Drop: Curt Class V Universal Weld-on Receiver Hitch and Brackets # 15901 - 7" Drop: Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V # 41990-07 I have added links to the installation instructions of...
  view full answer...
• Trailer Hitch Receiver Compatible With Osage Ambulance Box On 2007 Ford E-450 Van Chassis
  With your 2007 Ford E-450 van chassis and Osage ambulance box you are going to need a weld on receiver like the Curt Class V Universal Weld-on Receiver # 15902. This particular receiver includes brackets which will allow for a drop of 10.865" from the vehicle frame. We also have the Receiver # 15901 which will give you up to 3" of drop if you do not need any more than that.
  view full answer...
• Trailer Hitch Receiver Options For a 2013 Ford E-350 Cutaway Chassis
  It sounds like your 2013 Ford E-350 cutaway chassis will need the Curt Trailer Hitch Receiver # 14055. This receiver is specific to fitting the cutaway chassis with the mounting bolt holes 38-5/8" on center. If your holes are not this and the 38-5/8" is the frame width you will need a Universal Receiver # 15901 as there is not a custom fit available. The Receiver # 41547 you found is for a F-Series cutaway chassis and will not fit your E-350.
  view full answer...
• Can a Rear Mount Trailer Hitch be Used on the Front of a 1996 Nissan 4x4 Pickup Truck
  I do have a solution for you but you will not be able to use a rear mount hitch on the front of a vehicle. Some trailer hitch manufacturers we carry do not give us the hitch dimensions because it is proprietary information. But I can tell you that the hitches you have listed are not going to fit at the front of your 1996 Nissan pickup. The frame is narrower at the front but beyond that it would require modification to the hitch and/or the vehicle that would void the hitch warranty and...
  view full answer...
• Trailer Hitch Option For 2016 Winnebago on Mercedes Chassis
  There are options for a trailer hitch for your 2016 Winnebago on a Mercedes chassis, the not the hitch you referenced because that hitch is only a fit for certain Ford trucks. There isn't a custom-fit option so you'll need a universal weld-on hitch. You'll need to measure the frame of your Sprinter from outside to outside, and if it is 44 inches or less what you can use is the Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop # 15901.
  view full answer...
• Recommended 10,000 lbs Capacity Hitch for a Motorhome
  I have a universal hitch that will fit your Gulf Stream and provide you with the needed 10,000 lbs towing capacity but it must be welded on. It is the Class V Universal Weld-on Receiver Hitch item # 15901. None of the bolt on hitches have a capacity higher than 5,000 lbs. I have linked the instructions below so you can take a look at the steps and understand the process.
  view full answer...

Do you have a question about this Heavy Duty Receiver Hitch?