Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop
(89 reviews)
Price: $276.89
In Stock
Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop
Item # 15901
Retail:$415.95
Our Price: $276.89
You Save: $139.06
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (89)
- Q & A (0)
- Photos
CURT Heavy Duty Receiver Hitch - 15901
- 2 Inch Hitch
- Class V
- CURT
- 3 Inch Drop
- Weld-On
- 18 - 44 Inch Wide
Features:
- Universal hitch designed for use on service body trucks and utility body trucks
- Heavy duty, universal side bracket design
- Adjustable side brackets slide along hitch body to match exactly the width of your vehicle frame before being welded in place
- Side brackets fit frames from 18" up to nearly 44"
- Side bracket height produces a drop of 3" from the vehicle frame
- Black powder coat finish resists rust and corrosion
- Strong, secure all-frame attachment
- Solid construction for maximum strength and safety
- Assembled in the USA
Specs:
- 44" Wide trailer hitch receiver
- 2" Square receiver opening
- 1/4" Thick brackets
- Side brackets must be welded onto hitch and vehicle frame
- Side brackets fit frames from a minimum of 18" to a maximum of 43.88"
- Bracket height produces a drop of 3" from the vehicle frame
- Rating: Class V
- Maximum gross trailer weight: 15,000 lbs
- Maximum tongue weight: 1,500 lbs
- Limited lifetime warranty
Warning: All welding surfaces must be cleaned to bare metal or weld will not be the required strength and may void the warranty.
15901 Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop
Installation Details
Tech Tip
Welding required
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop - 15901
Average Customer Rating: 4.8 out of 5 stars (89 Customer Reviews)
by: Derrick 09/13/2023
Added (welded) to our diesel pusher Motorhome and have no issues and really no worries while towing whatever we feel we need while camping.
by: JohnnyFix09/24/2021
This hitch was exactly what was needed for my landscaping customer's small dump body truck. It replaced the original custom hitch with only minor modifications to accommodate the cargo body. I have done considerable work for this customer over many years. No issues reported with this job. All good!! Thanks to Curt and etrailer for great products and stellar service. —
by: Richard 08/23/2020
The hitch eeceiver I bought is perfect for my RV. What I was even more impressed with was the updates etrailer.com sent as my order processed and shipped. Each step of the way I was updated by employees who accompanied the update with their photos. Very personalized experience. Thank you etrailers.com!
by: Ron Spreadborough06/01/2015
Curt Class V receiver received complete and as advertised. Now, to get it installed by welder/ installer on '03 Newmar Dutch Star.
by: Cody B.04/14/2016
Worked great for my custom application. Placed behind my custom bumper as a hidden hitch.
by: Chris09/13/2022
Package arrived on time-there was a good deal of dust in the package but that doesn’t hurt anything-the hitch and pieces are heavy duty.
by: Kevin 12/27/2019
Excellent product, just what I needed for a modified flatbed installation
by: Jpfunk07/10/2020
Well made hitch, very adjustable, and easy to install. No problems towing my 30' cabin cruiser with my new-to-me Semi-tractor. Exactly what I was looking for.
by: Robert 09/21/2022
Solid and sturdy
by: Dana 08/29/2022
very fast service , and talked to a representative that pointed me to what i needed thanks
by: Jack 05/12/2021
The product was as described and worked fine.
by: David Barnes01/25/2012
Very high quality parts and as represented. No disappointment in this unit.
thanks
David Barnes
by: Jack 12/28/2020
Just what I needed
by: Gerry kk07/21/2016
Greatest price and exceeded expectations
by: Monica 01/05/2023
by: Dale 10/14/2021
by: Vladen03/11/2021
by: Michael 02/05/2021
by: EAVgirl07/14/2023
It’s beefy and solid. The mounting bracket square holes had to be cut in a smidge and he added two more support bars.. but all in all. My welder said it would tow 11-12 k. Not the 16k I was told. But hey. I’m okay with that. There was a shipping issue which forced me to reschedule a few things, that is the only reason I gave 4 stars. Otherwise I am supper happy with how it turned out.
by: David01/24/2024
It is very well built and the powder coating is very tough, took a good grinding to get it off for the welds. Good price as well. I used it for my 2006 Bounder 35E, not because it was a high rate hitch, as I did not need one, but this was the only one that would lower the hitch to a more normal height from the ground. The old hitch was so high a 10" deep was not enough to use a trailer parallel to the ground. Now I can hook up a lot easier and not worry about scraping. Looks good too.
by: James08/19/2023
Great quality product from Curt . Can be easy installation depending on the application.. mine more difficult because of aluminum alloy frame, so will have to do some reinforcing.
by: Paul10/10/2022
attached this hitch to my 1984 American General 5 ton military truck. Had to do some modification to air lines and drill a few holes but it is perfect for pulling civilian trailers with the M 813.
by: Jon12/09/2023
I put this on my 03 Freightliner Columbia. It does everything I want it to. It is bolted and welded.
I like it so much that a bought another one and put it on my old school bus. That one is just bolted on.
by: Gilles 04/19/2024
Fast shipping
25
89
Show More Reviews
See what our Experts say about this CURT Heavy Duty Receiver Hitch
- Availability of Trailer Hitch for 2017 Mercedes-Benz Sprinter 3500 With 30-3/8 Inch Frame WidthThere are two primary reasons why a hitch isn't available for the narrow framed Sprinter 3500 models. First, the vehicles aren't super-common, the wider framed vehicle is much more prevalent. Secondly, most of these vehicles are used as commercial vehicles that have been equipped by aftermarket upfitter companies that commonly add utility or service bodies or steps such as your vehicle is equipped with. It'd be difficult for the hitch manufacturers to develop a hitch because the way the...
view full answer...
- Trailer Hitch Option For Shuttle 2011 Chevy Express Shuttle BusFor a shuttle bus like your 2011 Chevy Express, you'll need a universal hitch that will be welded onto your frame. You will want to measure your frame though, as it will need to be no longer than 44 inches from outside to outside. So long as you have that, you can use one of the following, depending on how tall you need the brackets to be: - 3" Drop: Curt Class 5 Universal Weld-on Hitch # 15901 - 9" Drop: Curt Class 5 Universal Weld-on Hitch # C47CR
view full answer... - Trailer Hitch Receiver Option for Bus With 35-1/2 Inches Between C-Frame and DropWhile we have a potential option for you, the hitches that fit a 2000 Chevy Express van have mounting holes 40 inches apart, and additionally the manufacturers expressly state they do not fit the cutaway models, so you will need one of the universal options. What you may be able to use is the Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop # 15901. This has brackets which are adjustable and fit frames from a minimum of 18" to a maximum of 44" and the receiver has a...
view full answer... - Recommended 10,000 lbs Capacity Hitch for a Motorhome I have a universal hitch that will fit your Gulf Stream and provide you with the needed 10,000 lbs towing capacity but it must be welded on. It is the Class V Universal Weld-on Receiver Hitch item # 15901. None of the bolt on hitches have a capacity higher than 5,000 lbs. I have linked the instructions below so you can take a look at the steps and understand the process.
view full answer... - Hitch Option For Utility Bed on Chevy SilveradoWe do have an option though nothing custom fit for your Chevy Silverado with a utility bed. What you may be able to do though is use a weld-on hitch from Curt: - Class V Universal Weld-on Receiver Hitch and Brackets # 15901 The # 15901 can be welded onto frames that are up to 44" wide and it gives you a 3" drop from the frame, which based on how you described it should work for you.
view full answer... - Recommended Hitch And Wiring For A 1971 Toyota Land Cruiser FJ40Hi Holly, There unfortunately aren't any custom-fit hitches confirmed to fit your 1971 Toyota Land Cruiser FJ40 so you'll have to go with an adjustable-fit weld-on trailer hitch. These come in a variety of drop lengths to help you clear the rear bumper/fascia so you'll want to measure down from the frame to see how large of a drop is needed for the receiver tube to clear. Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2"...
view full answer... - Recommended Trailer Hitch for a 2010 Chevrolet Express Box TruckKenneth, since you probably do not need as much drop as most you'd probably best benefit from a hitch that has minimal drop like the Curt Adjustable Trailer Hitch Receiver # C13701 that has 2" of drop or # 15901 for a 3" drop. Both of these hitches are semi-universal so they'll fit a range of frames, both have a 2" receiver opening, and are both assembled in the USA. The main difference other than the drop, is # 15901 is a class V hitch rated at 16K, and # C13701 is a class III hitch,...
view full answer... - Recommended Trailer Hitch Receiver For A 1999 Toyota Prado RHDHi Colin, Since there isn't a confirmed fitting custom-fit hitch for a 1999 Toyota Prado RHD the only option would be to install a weld-on adjustable-fit trailer hitch. We haven't had a Prado in to test it for a fit with a 4Runner trailer hitch unfortunately. We have a few different sizes depending on the drop you'll need to clear the rear fascia: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop...
view full answer... - Motorhome Hitch Upgrade to Use with 472-Pound Motorcycle on the Ultra-Fab # UF48-979033As far as mounting your 472-pound motorcycle along with the 52-pound Ultra-Fab Dirt Bike Carrier # UF48-979033 on your hitch rated for 500-pound hitch, you should definitely upgrade the hitch. This is because it is extremely dangerous to exceed the rated weight capacity of your hitch. While we do have a great option for you, the only Class IV universal hitch we carry is specifically constructed to be used with service vehicles. That is the Buyers Products # 3371801053. For an option that...
view full answer... - Front Mounted Trailer Hitch Receiver Options For A 2003 Nissan Frontier Hi Hank, It unfortunately looks like there aren't any custom-fit front mounted trailer hitch receivers for your 2003 Nissan Frontier so the next option would be an adjustable-fit weld on hitch. We offer a few different drops to help get the receiver tube under the fascia so you'll need to do some measuring from the frame to determine the drop needed. Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop...
view full answer... - Recommended Trailer Hitch For A Vehicle With A 32" Frame Width The Curt Trailer Hitch Receiver # C15323 has a 39" distance from center to center of the mounting holes so it's not going to be a good candidate for your application. Since you can weld the best option is going to be an adjustable-fit weld-on hitch. We have a few different options depending on the drop you'll need: 3" # 15901 7" # 41990-07 9" # C47CR 11" # 15903 16" # 41990-16 The crosstube of these trailer hitches can be cut down to size to fit your vehicle's frame width.
view full answer... - Universal Hitch for a Freightliner P700 or M45The only styles of hitches that can be made to fit a service body truck like your Freightliner P700 or M45 are universal hitches like the Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop item # 15901.
view full answer...
- Front-Mounted Hitch Options For A 2021 Chevy Silverado 1500 3.0L Duramax Hi Kelly, There unfortunately are no custom-fit front mounted trailer hitches available for Diesel models of the 2021 Chevy Silverado 1500 so you would have to go with an adjustable-fit weld-on hitch and measure for the correct drop needed/check for any obstructions that could prevent fitment with the mounting brackets to the frame. We offer the following options: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop...
view full answer... - Recommendation for Class 5 Hitch to Fit 1995 Ford F350 with 34 Inch Frame and Flat Dump BedBased on the size of your frame, it sounds as though your 1995 Ford F350 is the Cab and Chassis style. Curt offers a Class IV Receiver Hitch, # C14082, that with bolt directly to your vehicle's frame with no welding required. This hitch has a 1000 pound tongue weight capacity and 10000 pound towing capacity. We do not offer a custom Class V hitch for your truck but universal Class V hitch receivers are available. Curt offers the Universal Weld-On Receiver, # 15901, with 3 inch drop and...
view full answer... - Trailer Hitch Receiver Compatible With Osage Ambulance Box On 2007 Ford E-450 Van ChassisWith your 2007 Ford E-450 van chassis and Osage ambulance box you are going to need a weld on receiver like the Curt Class V Universal Weld-on Receiver # 15902. This particular receiver includes brackets which will allow for a drop of 10.865" from the vehicle frame. We also have the Receiver # 15901 which will give you up to 3" of drop if you do not need any more than that.
view full answer... - Class V Hitch With Drop For 34 Inch Frame Rails on Custom TruckWe definitely have some options that will work for you, though in regards to the specific hitches you asked about, the Curt Trailer Hitch Receiver # C15300 is 36 inches between the bolt holes, while the Curt Trailer Hitch Receiver # C15410 measures 34 inches between the bolt holes. So neither is going to fit 34 inch wide outside-to-outside frame rails, which makes sense as these are custom-fit hitches. What you can use instead is a universal weld-on hitch that doesn't require that specific...
view full answer... - Recommended Flat Towing Parts for a 2016 Jeep Wrangler You shouldn't need to add anything to your RV. It looks like the 2018 Winnebago Vista came with a 2" hitch rated for 5,000 lbs and a 7-way connector. The 7-Way connector is what you will plug the wiring coming from your Jeep into. Your Winnebago has hydraulic brakes so you won't need to mess with air lines. I am not sure what list you are going off of but here's another one with the Roadmaster parts I recommend using to flat tow your 2016 Jeep Wrangler: Tow Bar and Safety Chains - Roadmaster...
view full answer... - Trailer Hitch Receiver Options For a 2013 Ford E-350 Cutaway Chassis It sounds like your 2013 Ford E-350 cutaway chassis will need the Curt Trailer Hitch Receiver # 14055. This receiver is specific to fitting the cutaway chassis with the mounting bolt holes 38-5/8" on center. If your holes are not this and the 38-5/8" is the frame width you will need a Universal Receiver # 15901 as there is not a custom fit available. The Receiver # 41547 you found is for a F-Series cutaway chassis and will not fit your E-350.
view full answer... - 2010 Ford E450 Based Motorhome Yellowstone GulfStream Class V HitchI've spoken to Curt on your behalf and there is no bolt on hitch for your 2010 E450, but you can use the Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop # 15901. You will need to weld it on to your frame. This hitch has a maximum gross trailer weight of 15,000 lbs and a maximum tongue weight of 1,500 lbs. It has a 3 inch drop which you may want more. Here is the same hitch but it has almost a 11 inch drop # 15902. To make sure that your racecar trailer will not exceed...
view full answer... - Trailer Hitch Options For A 2019 Isuzu NPR With Rollback Flatbed Hi James, There isn't a custom-fit trailer hitch option available for your 2019 Isuzu NPR so you'll need to measure the distance between the inside of the frame rails and also the drop needed from the frame down to clear the rear bumper. We offer a variety of drops to accomplish this that I've listed out below: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop # C99CR These would all need to be welded...
view full answer... - Option For Hitch For 2008 BusWhat you can do to put a hitch on your bus is get a universal fit weld-on hitch, and you just need to choose the right drop depending on how much lower your bumper is than the frame. The hitches that will work are: - 3" Drop: Curt Class V Universal Weld-on Receiver Hitch and Brackets # 15901 - 7" Drop: Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 These will work with frames up to 44 inches wide.
view full answer... - Class V Trailer Hitch Receiver Rated For 15,000LBS That Will Fit a Frame With Mounting Holes 31.75I recommend the Class V Universal Weld-on Receiver Hitch # 15901 as I cannot locate a custom fit receiver with those measurements. This receiver will fit frame widths from 18" to 43.88" and has the maximum trailer weight rating of 15,000lbs and maximum tongue weight of 1,500lbs.
view full answer... - Best Class V Trailer Hitch for a Class C MotorhomeI do still have an option for you in the Class V Universal Weld-on Receiver Hitch part # 15901 but it sounds like you are looking for a custom fit trailer hitch and none of the trailer hitch manufacturers we offer custom fit them to motorhome chassis. Therefore, you will need to notify the above to work for you. It has a class v rating with adjustable brackets that will accommodate your motorhome with slight alterations. The low profile brackets will also provide you with the flush look...
view full answer... - Hitch For 1993 Ford E-350 RV With 42 Inch FrameThanks for the frame dimensions, and while there are hitch options for your 1993 Ford E-350 RV, I checked with the hitch manufacturers and there are no custom fit options. So what that means is in order to add a hitch to your RV, you would need a universal weld-on hitch. There are three different options, with each of them being Class V hitches with a 2 inch receiver, and fit frames that are between 18 inches and 44 inches wide, so they will fit your '93 E-350's 42 inch frame. The difference...
view full answer...
Do you have a question about this Heavy Duty Receiver Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Steven C
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.