bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class II
  4. 1-1/4 Inch Hitch
  5. 3500 lbs GTW
  6. Visible Cross Tube
THIS ITEM IS NOT A FIT FOR
2017 Ram 1500
Draw-Tite

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Part Number: 36336
In Stock
$213.22
Retail:$320.36
You Save: $107.14
Trailer Hitch
Not Confirmed to Fit

2017 Ram 1500

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" part number 36336 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (362)
  • Q & A (0)
  • Photos

Draw-Tite Trailer Hitch - 36336

  • Class II
  • 1-1/4 Inch Hitch
  • 3500 lbs GTW
  • Visible Cross Tube
  • 300 lbs TW
  • Draw-Tite
  • For Towing

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class II
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 300 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



36336 Draw-Tite Class 2 Trailer Hitch Receiver

90174 Hidden Hitch Class 2 Trailer Hitch Receiver

Installation Details 36336 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.8

363 reviews
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

by:

Pretty Good - One ProblemInstalled this on my wife's '05 Camry in Nov. '08. The installation was a breeze thanks to e-Trailer's website videos. However...
The lowest portion of the hitch - the part that loops under the muffler/tailpipe - bottoms out on our driveway and on occasional deep dips on the roadways. We have to drive very slowly and approach at an angle to avoid scraping the pavement. The noise it makes is almost frightening. I do not have a problem with the HH #60815 installed on my '08 HHR going up our driveway.

I'm sure the problem is just that this part of the hitch on this particular model is too low and too far back from the rear wheels. I would ask Hidden Hitch to take another look at this design.

The people at e-Trailer were very pleasant and helpful in my selection and purchase of these hitches and our bike carrier. I confidently recemmend e-Trailer for your trailering needs.



by:

Very easy to install! Great product.



by:
2005 Toyota Camry

It was easy to install and works great!



by:

Good product and easy to install. Fast shipping!



by:

delivery was excellent. Instructions was also written great.



by:

Product received in time. No problem. Easy to do business with this company.



by:
2002 Toyota Camry

Have only used once, but seems to be as advertised.



by:

Thanks you were wonderfull, would by from you again .



by:

Just Installed not yet but feels very solid.



by:
2003 Toyota Solara

Delivery time was awesome! Great company to do business with! Thanks folks!



by:
1999 Toyota Solara

Great fit, looks good. Installation instructions were clear.
Very happy with the hitch.



by:
2000 Toyota Camry

WOW!! I ordered this thing Sunday night - and it's now in my garage on Wednesday!!! (box is in good shape, too - I might add!!!)

I'm very impressed!!!



by:
2005 Toyota Camry

Product arrived promptly and was very easy to install.



by:
2006 Toyota Camry

This hitch was easier to install than I imagined and secure when installed. It works well with the 2006 Camry.



by:
1998 Toyota Camry

the hitch and plug and play wire lighting were perfect and installed quickly and easly, hardest part was retapping the rusted nuts on the older car



by:

Great price, free shipping, and the installation video was spot on. I could not ask for more. Thank you.



by:

My trailer hitch and wiring fit perfectly with no hassles and was delivered promptly. It was a very pleasant buying experience.



by:

The hitch installed exactly as shown on the video. Two sockets, one ratchet and 40 minutes and the job was complete. It is refreshing to do business with a company that provides everything as advertised and at a very fair price.






by:

I was planning on cleaning the bolt holes on my morning coffee break at work and installing the hitch at lunch break. It only took 4-5 mins to clean bolt holes so I finished the complete intallation on my 15 min coffee break. All holes lined up. Ain't nothing to it...a baby could do it...or a 55 year old like me.



by:

The box was damaged in shipping. The end of the trailer hitch was bent. I had to bend it back, to get the bolt holes to lined up somewhat properly. It took about 75 minites to line up the bolt holes and bolt the trailer hitch to the car. Only complaint is shipping damage. Trailer hitch and cargo carrier work well together.

Thankyou.



by:
1998 Toyota Camry

Hitch bolted right in less than half hour. My only suggestion would be the drop down for the muffler could be alot less it hangs down pretty low. All in all a great product



by:

i am very impressed with your emails and the upgrade to shipping that you gave me.
thanks.



by:

man that was easythey are not kidding when they say 30 minute install...too easy...fast shipping...



by:

excellent product-perfect fit I was please at the quality of product and the thought put into the directions. The installation was madae diffficult only by the age of the existing boltsbut once they were removed, the instaltion went perfectly.



by:

Delivered Super fast ..easy to install...I am very happy !! THANK YOU ..etrailer


25
363
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Recommended Way To Transport a Lawn Mower with a 2001 Toyota Camry
    We have cargo carriers that work with trailer hitch receivers from Class I to Class IV. However, your options will diminish with the lower your hitch is rated. The highest rated hitch we have for your 2001 Toyota Camry is a Class II like the Draw-Tite Trailer Hitch Receiver part # 36336 which has a 1-1/4" receiver tube opening. The best cargo carrier we have for your vehicle and mower is the Rola Cargo Carrier part # 59507. The Rola Cargo Carrier is is rated for use with Class II receivers...
    view full answer...
  • Hitch and Bike Rack Recommendation for 2005 Toyota Camry
    The review for the Draw Tite hitch part # 36336 which is a confirmed fit for your 2005 Toyota Camry is several years old. It was from back in 2011 when this hitch was a Class I hitch. Now that it's a Class II hitch it will allow Class II bike racks to fully insert and install. Class I hitches have a weld stop in the tube that prevents a Class II only accessory from inserting. Now that is not the case. That being said the Thule T2 Pro part # TH23JV that you referenced is a Class I compatible...
    view full answer...
  • Hitch Cargo Carrier and Bike Rack Recommendation for 2001 Toyota Camry
    So first you'll need a hitch installed on your 2001 Toyota Camry. For that the Draw Tite part # 36336 is the best option. Then for a cargo carrier you'd want the Reese part # 63155 which fits the hitch and has a platform that measures 20 by 47 inch.
    view full answer...
  • Installation Difficulty of Draw-Tite Trailer Hitch # 36336 on a 1992 to 1996 Toyota Camry
    For the Draw-Tite Trailer Hitch, # 36336, for the 1992 to 1996 Toyota Camry, 2 door and 4 door, we rate the difficulty of installation as a 5 out of 10. We base the scale on the estimated installation time. A 5 out of 10 indicates that it should take a novice installer with the correct tools and an assistant about 50 minutes to install the hitch. I have included a link to the installation instructions for this trailer hitch which lists the tools needed and the steps for installation. You...
    view full answer...
  • E-Bike Rack Solution for 2002 Toyota Camry
    Hey Mar, I have a solution for you but unfortunately the trunk bike racks just don't have the capacity for a 65 lb e-bike. They only have about half the capacity needed. What you'll need to do is go with an e-bike rack like the # TH903202 and a hitch for your 2002 Toyota Camry like the # 36336. For heavy bikes like e-bikes the only real solution is a hitch solution.
    view full answer...
  • Is there a Class III Hitch for a 2005 Toyota Camry?
    Hey Walter! There's no class III hitches for your 2005 Toyota Camry. The only hitch available is the Draw-Tite item # 36336, which is a class II hitch with a 1-1/4" receiver.
    view full answer...
  • Availability of Hitch Install Hardware for 2005 Toyota Camry
    Hey Scott, we sell replacement hardware for all of the hitches we carry including the ones that fit your 2005 Toyota Camry like the Draw Tite hitch part # 36336 with the part # RHK. You'll need to enter the part number for the hitch you have on the product page and we'll ship you out the parts you need.
    view full answer...
  • What All Other Years Does the Trailer Hitch for Toyota Camry Fit
    The Draw-Tite Trailer Hitch Receiver part # 36336 is a confirmed fit for 1992 - 2006 Toyota Camry and what I recommend using. It has a class I rating with 1-1/4" opening. It's rated up to 3,500 lb for gross trailer and 300 lbs for tongue.
    view full answer...
  • Correct Trailer Hitches That Fit a 2005 Toyota Camry
    The correct trailer hitches for your 2005 Toyota Camry are the Draw-Tite # 36336 and Curt # C12339. I recommend going with the Draw-Tite simply because I like the style of the safety chain loops better. They are a little more out of the way but still functional. I have attached an installation video of this hitch on a 2005 Camry that you can check out. If you let me know what you plan on using the trailer hitch for I can make additional recommendations for you.
    view full answer...
    Image 1 for
  • 2 inch Hitch Adapter with Rise Availability for a 2000 Toyota Camry
    As long as the hitch installed on your 2000 Toyota Camry is a Class II hitch like the part # 36336 you can use the adapter part # HT5R which will give you a 2 inch hitch 5 inches higher than the opening of your hitch. For a locking hitch pin for the 2 inch portion of this you would want the part # e98880. You should note that when you use an adapter like this you end up cutting the capacity of the hitch in half.
    view full answer...
  • Does Same Hitch From 2000 Toyota Camry Also Fit 2005 Camry
    The trailer hitches like the Draw Tite part # 36336 fit both a 2000 and a 2005 Toyota Camry as this hitch fits 1992 through 2006 Camrys. I attached an install video for this hitch for you to check out as well.
    view full answer...
  • Comparing the Draw-Tite and Curt Trailer Hitch for a 2004 Lexus ES 330
    Both the Draw-Tite # 36336 and the Curt # C12339 will essentially have the same ground clearance. When we installed the Curt option on a 2005 Toyota Camry we found the distance from the ground to the top of the inside of the receiver opening to measure 11-1/2". When we installed the Draw-Tite option on a 2006 Camry we found that same measurement to be 11-3/4". This difference could very well have to do with differences in the tire inflation or cargo in the rear of the vehicle as well so...
    view full answer...
  • Towing Capacity and Trailer Hitch for 2005 Toyota Camry
    I looked up the towing capacity of your 2005 Toyota Camry and found it to be 2,000 lbs. So as long as your trailer would weigh less than that when loaded you'd be good with the Draw Tite hitch part # 36336 installed. Then for trailer wiring you'd also need the part # 118308 which is easiest to install and most reliable. I attached install videos for both of these for you to check out as well.
    view full answer...
  • Correct Thread Tap to Install Draw-Tite Trailer Hitch on 2002 Toyota Camry
    To clean the weld nuts to install the Draw-Tite Class II Trailer Hitch Receiver # 36336 you'll need a thread tap the same as the M10 fasteners which is 10 mm by 1.25 inches. I've attached a help article and video about cleaning weld nuts that you might find helpful as well.
    view full answer...
  • Hitch Bolts Seem Too Large for the Weld Nuts in the Frame on a 2000 Toyota Camry
    The bolts provided with the Draw-Tite Trailer Hitch, # 36336, are the correct bolts for your 2000 Toyota Camry, see instructions link. You are most likely running into corrosion from road grime and salt since your vehicle has some age. We have help videos, see links, that detail how to go about cleaning the vehicles weld nuts for installing the hitch. You may find that a weld nut will break off when trying to install the hitch, despite your best efforts, if this happens we have a video...
    view full answer...
  • Trailer Hitch Fit For 2006 Toyota Camry
    While your concerns about clearance are understandable, the Draw-Tite 24563 is not a fit for your 2006 Toyota Camry; the two hitches which fit your Camry are the Draw-Tite # 36336, which you mentioned, and the Curt # C12339. Both of these are going to be installed with a part that goes under the exhaust, which is the part that you are likely worried about scraping your driveway. I went to the warehouse to measure the Curt, and it was two inches from the bottom of the receiver to the bottom...
    view full answer...
  • Trailer Hitch Recommendation and Towing Capacity for 2003 Toyota Camry
    I'd recommend confirming this with the owners manual of your 2003 Toyota Camry, but I was able to find a 2,000 lb towing capacity for your vehicle which should be adequate for a motorcycle trailer like you plan on towing. Now we have Class II hitches available for your vehicle like the Draw Tite part # 36336 which are rated higher than that at 3,500 lbs trailer weight, but you have to go with the lowest rated component in your tow setup as the overall capacity as you're only as strong...
    view full answer...
  • What Size Bolts Does the Draw-Tite Hitch for a 1998 Toyota Camry Use
    The bolts which secure the Draw-Tite Trailer Hitch Receive part # 36336 to the frame on a 1998 Toyota Camry are as follows: Hex Bolt M10 x 1.25 x 30mm CL8.8 If you need these, we do offer a complete kit that comes with these and everything else you need to install the hitch, the Replacement Hitch Hardware Kit part # RHK.
    view full answer...
  • How to Carry a Mobility Scooter with a 1999 Toyota Camry
    I do have an option for you but the highest rated trailer hitch receiver they make for a 1999 Toyota Camry is a Class II, to my knowledge. I would be very skeptical that a Class III or IV exists due to the size of the vehicle. For a Class II trailer hitch with a 1-1/4" receiver tube opening I recommend the Draw-Tite Trailer Hitch Receiver part # 36336. This trailer hitch has a 300 lb tongue weight (TW) rating however, the vehicle is likely lower and if that is the case then this will need...
    view full answer...
  • Tips for Trailer Hitch that Won't Line Up Totally with Install Holes
    It is possible that the # 36336 hitch you have bent slightly in shipping. We see this happen occasionally and since that rear bracket is a separate piece from the bracket in front of it could have easily bent in or out. What you can do is try bending the hitch back slightly to get the hole to line up. As long as there is no paint flaking or creases in the metal you would be fine.
    view full answer...
  • Install Hardware Recommendation for a Draw Tite Hitch on a 2000 Toyota Camry
    To install the Draw Tite Hitch part # 36336 on your 2000 Toyota Camry you would need to use the included install hardware that is M10 x 1.25 x 30 mm. Or if you wanted us to send you all new install hardware for this hitch you would need part # RHK. On the product page you would enter Draw Tite as the manufacturer and 36336 as the part number and we'll ship you out all the needed hardware to install this hitch.
    view full answer...
  • Which Draw Tite Hitch Fits 2005 Toyota Camry
    For your 2005 Toyota Camry we only have trailer hitches that have brackets that fit under the exhaust like the part # 36336. The hitch you referenced is for the older generation Camry and would not be what you would want to use.
    view full answer...
  • Tips for Cleaning Weld Nuts to Install Hitch in 2004 Toyota Camry
    I attached three links to this page that offer tips in cleaning weld nuts. This will help you install the Draw Tite part # 36336 on your 2004 Toyota Camry.
    view full answer...
  • Will the Yakima HoldUp 2 Bike Rack Fit on a 2003 Toyota Camry
    If you had a Class II hitch like a Draw-Tite Trailer Hitch for the 2003 Toyota Camry, part # 36336, on your 2003 Toyota Camry you could use the Yakima HoldUp 2 Bike Hitch Mounted Folding Rack with Wheel, part # Y02445. The reason the Corolla and Yaris can not use the # Y02434 is because they have Class I hitches, whereas the Camry has Class II hitches available that are compatible with the # Y02434. I attached a link to installation instructions below for you to check out, I also attached...
    view full answer...


< Previous
123. . .4



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Shane T
Test Fit:
Shane T
Employee Zack K
Video Edited:
Zack K
Employee Andrew L
Video Edited:
Andrew L
Employee Sue W
Video Edited:
Sue W
Employee Andrew K
Video by:
Andrew K
Employee Joshua S
Video by:
Joshua S
Employee Lindsey S
Written by:
Lindsey S
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<