2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs

Ask the Experts about this Draw-Tite Trailer Hitch Ball

• Trailer Hitch, Wiring Harness and Ball Mount for 2019 Hyundai Kona
  There is a trailer hitch that fits your 2019 Hyundai Kona, but it is a Class I hitch with a 1-1/4 inch receiver, and there are no hitches with a 2 inch receiver available for your Kona. All of the parts you need to tow a small trailer with your 2019 Hyundai Kona are the following: - Draw-Tite Trailer Hitch Receiver # 24976 - T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C99KR - Draw-Tite Drawbar # 3593 - 1-7/8" Hitch Ball # 19256 or 2" Hitch Ball # 19258...
  view full answer...
• Will Trailer Hitch Fit 2019 Volkswagen Jetta With Faux Dual Exhaust Trim
  Thank you so much for the photo it was very helpful! And since your 2019 Volkswagen Jetta has the faux dual exhaust which is just a trim and is not truly dual exhaust, you can absolutely install the Draw-Tite Trailer Hitch Receiver # 24978. I have added an additional photo a customer sent in which shows this hitch installed on a 2019 Jetta that has the same faux exhaust trim so you can see what the hitch will look like when installed on your Jetta. Additionally, if you plan on doing...
  view full answer...
• Is there an Adapter to Fit a Hitch Ball with 1 Inch Diameter Shank in a 1-1/4 Ball Hole
  All you will need is a mushing # 58184 that will allow you to use the 1 inch ball shank in the 1-1/4 inch diameter hole on your weight distribution head. If you instead decide to get a new ball you can use # 19286.
  view full answer...
• Where to Measure to Pick out Correct Rise/Drop Ball Mount
  We need to get you a ball mount that will allow your tow dolly to be towed at the correct height. Basically you will need to measure from the top of your hitch opening down to the ground and whatever the difference is between that number and 24 inches is the amount of rise/drop you would need. I attached a help article that covers this process.
  view full answer...
• Does Maximum Towing Weight Listed On A Trailer Hitch For A Toyota Prius Mean It Can Tow That Amount
  When you install a hitch like the Draw-Tite Class I 1-1/4 Inch Hitch, part # 24847, on a 2011 Toyota Prius it does not mean that your vehicle can now tow 2,000 lbs. That is just the maximum towing weight capacity for that hitch. If the vehicle that the hitch it goes on has a lower towing weight capacity, then the lowest weight capacity is what is used as the maximum towing weight capacity for your towing setup. You will want to check your owners manual or with the Toyota dealer for the...
  view full answer...
• What is the Thread Pitch for 2 Inch Hitch Ball # 19258
  If you are buying a new ball such as # 19258 then its thread pitch doesn't matter because it comes with a compatible nut. This ball has 16 threads per inch which is about 0.05 inches from the top center of one thread to the top center of the next.
  view full answer...
• Trailer Hitch Ball Recommendation for SylvanSport GO Trailer
  Sounds like you are referring to the hitch ball as a "drawbar" and by rondelle/eye you are referring to a pintle hook and loop style of coupler. There isn't a way to convert a smaller pole tongue trailer like what you have to this. I looked up the trailer and it needs a 2 inch ball like the part # 19258.
  view full answer...
• Which Trailer Ball Size for Small Motorcycle Trailer
  The ball size you need will be dictated by the coupler on the trailer. Take a good look at the top of the coupler. The necessary ball size should be stamped on the coupler itself. The smallest ball size we offer is 1-7/8 inch, which is most likely what you need. The 1-7/8 inch balls come with various shank diameters with 1 inch like part # 19260 or 3/4 inch like part # 19256 being the most popular. You will want to choose a trailer ball whose shank diameter matches the diameter of the...
  view full answer...
• Socket Size to Use for Installing 2" Draw-Tite Hitch Ball with 3/4" Shank
  You will need to use a 1-1/8" socket to install the 2" Hitch Ball # 19258 that you recently purchased. If you check out the attached installation video we mention what size socket to use and also give some other pointers when it comes to the installation.
  view full answer...
• Size of Nut Included with Tow Ready 2 Inch Chrome Hitch Ball
  The Tow Ready 2 inch Hitch Ball # 19258 includes a 1-1/8 inch nut. I just went out to our warehouse to check. It sounds like it'll work great for you.
  view full answer...
• Availability of 2-5/16-Inch Hitch Ball with 3/4-Inch Diameter x 2-1/2-Inch Long Shank
  The included link will take you to our main page for 3/4-inch diameter shank hitch balls. In the 3/4-inch diameter shank size we offer only 50mm, 2-inch and 1-7/8-inch ball sizes. All of our 2-5/16-inch hitch balls have a shank diameter of 1-inch minimum up to 2-inches maximum. Most hitch balls in this size have a 1-1/4-inch diameter shank. The other link will let you see all balls in this size. You will need to drill out the ball hole to one of the larger diameter sizes and then choose...
  view full answer...
• Can Trailer Ball Hole in Towing Bumper Be Enlarged to Accommodate a 2-5/16 inch Trailer Ball
  I wouldn't recommend doing that, as it will reduce the structural integrity of the bumper. Most towing bumpers are only rated for 3500 lbs, and a trailer that would use a 2-5/16 ball is typically heavier than that. You'd want to use the receiver hitch shown in your photo, rather than mounting a ball in your bumper.
  view full answer...
• Trailer Hitch, Wiring and Towing Capacity for 2018 Jeep Renegade
  I took a look at the owner's manual for a 2018 Jeep Renegade and it says that if the Jeep has a 1.4L engine, that trailer towing is not recommended, but if it has the 2.4L engine, the towing capacity is 2,000 lbs. We have to go by what the manufacturer recommends, so if he has the 1.4L engine there unfortunately isn't a comfortable capacity we can give you. If he does decide to tow with either engine, the hitch you mentioned is a great option that will fit a 2018 Jeep Renegade, the Draw-Tite...
  view full answer...
• Best Way to Transport Heavy SUP & Kayaks on 2014 Kia Soul That has Factory Roof Rack
  So there is a way that is going to allow you to transport your kayaks and SUP with your 2014 Kia Soul, but the issue is the factory roof rack, so the only option is going to be a kayak trailer. There simply isn't any type of load assist that is going to work with your factory rack, and there's no way to carry 98 lbs of SUP/Kayak on a rack that has a 100 lb capacity - any carrier is going to overextend the rack. So your only option truly is a trailer, and here are the parts you'll need: -...
  view full answer...
• Is There a Ball Larger Than 2 Inch Diameter For Class II Trailer Hitch
  The largest ball they make for Class II hitch is 2 inch. There are not any bigger sizes because the Class II hitch would not be able to handle the weight even if the ball is rated to handle more weight. There are bigger ball sizes larger than 2 inch available for higher class hitches because those hitches can handle more weight, and a higher rated ball is used in some applications.
  view full answer...
• Trailer Hitch and Wiring for a 2011 Volvo C30 R Design
  I will be happy to help you with all the parts needed to tow the rental trailer with your 2011 Volvo C30 R Design. I spoke with my contact at Curt and he said that while they haven't tested hitch # C11337 on an R-Design C30 they also have not had any calls from customers or installers saying that it wouldn't fit. So based on that and the fact that the rear fascia, though different in appearance on the R-Design, isn't any lower than on the base models, the hitch should fit the R-Design...
  view full answer...
• How to Transport Dirt Bike With 2012 Mazda 5
  The only way for you to carry a dirt bike with your 2012 Mazda 5 is with a small trailer. The reason for that is the only hitch available for this vehicle is a Class 1 hitch, and these have 1-1/4 inch receivers and there are no dirt bike or motorcycle carriers that are compatible with that size hitch or have the weight capacity you need. If you do decide to do this you will need a hitch, wiring and ball mount, and the correct parts for your 2012 Mazda 5 are the following: - Draw-Tite...
  view full answer...
• How To Install a Trailer Hitch Ball to 1997 Subaru Legacy Outback Limited
  To attach a trailer hitch ball to your 1997 Subaru Legacy Outback Limited will require the installation of a trailer hitch to your vehicle. The only vehicles that would allow just a hitch ball to be installed without a hitch are vehicles that have a step bumper that have a hole in the bumper for the installation of the hitch ball. This bumper along with the vehicle it is on are designed to withstand the stress of towing a trailer with only the bumper. For a hitch to fit your Legacy...
  view full answer...
• What is the Length of the Tow Ready Hitch Ball Shank Once Secure on the Ball Mount
  I went to our warehouse to get the Tow Ready 2-inch hitch ball # 19258. It measures 2-3/4 inches from the bottom base edge of the hitch ball to the top of the hitch ball. I included a short video and diagram for you as well.
  view full answer...
• Hitch and Weight Distribution System Recommendation for a 2002 Ford Escape
  There are no weight distribution systems that are designed to work with a 1-1/4 inch hitch like what you have on your 2002 Ford Escape, but I do have a solution for you. You will need to replace your hitch with a 2 inch hitch like the Draw Tite Hitch part # 75118. With this hitch you can use a WD system. You can not use a WD system with a 1-1/4 inch to 2 inch hitch adapter either. The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of...
  view full answer...
• How to Determine Correct Hitch Ball Size to Use with 1976 Gator Boat Trailer
  Unfortunately this type of information is not usually available from trailer manufacturers, especially on older models like your 1976 Gator Boat Trailer. The ball size is typically stamped inside or on top of the coupler, however this information might be worn out or hard to read on an a trailer like yours that has been around for a while. If you can't locate any size information then the next option is to verify the trailer's weight capacity or GVWR. This number can give an indication...
  view full answer...
• Parts Needed to Tow Small Trailer With 2014 Toyota Prius C
  We do have everything you need for your 2014 Toyota Prius c to tow a small trailer, which is a hitch, wiring harness, ball mount, and hitch ball. I'll make a list for you of all the parts: - Draw-Tite Trailer Hitch Receiver # 24971 - T-One Vehicle Wiring Harness # 118680 - Draw-Tite Drawbar # 3593 - 1-7/8" Hitch Ball # 19256 or 2" Hitch Ball # 19258 The hitch ball size will depend on the size of your trailer's coupler, but it will likely be 1-7/8" since it is a small trailer. The...
  view full answer...
• What Parts are Needed to Tow a Trailer and Use a Bike Rack on a 2002 Ford Escape
  No worries! If it's still in good shape, there's no reason why you can't continue using your bike rack. You'd just need to use a hitch receiver reducer like part # HT02. The reducer would install into the hitch and be secured with a hitch pin like # PC3. Then, the bike rack is installed into the reducer.
  view full answer...
• Recommended 2 Inch Trailer Hitch Ball That Works With Class ll Hitch On 2015 Nissan Rogue
  Since you went with the Class ll hitch you can use part # 19258 for a 2 inch trailer ball. I had mentioned both the 1-7/8 inch and the 2-inch trailer hitch balls so you can order the right size hitch ball for your trailer.
  view full answer...
• Solution for Trailer that Bumps Vehicle Bumper While Backing Up to It
  While we don't have a product that does what you are looking for I can help you. I am familiar with what you are describing. Once you back your vehicle up and get it perfectly lined up it moves several inches after you put it in park and release the brake...which screws up everything and sometimes bumps the tow vehicle. If you have a great parking brake just apply that once you get lined up and the vehicle won't move. Or, and this took some trial and error on my part, you can put the...
  view full answer...
• Are there More Accessories Available for a Class II Hitch than a Class I Hitch
  You are correct, there are less accessories available for Class I hitches than there are for Class II hitches. If you have already seen some Class II accessories you like, I would go ahead and purchase the Class II hitch for your 2005 Camry. You will still be limited to the towing and tongue weight capacities of the Camry since they are lower than the typical 350/3500 pound rating of a Class II. In fact, all of the aftermarket hitches we have available for your 2005 Camry are Class...
  view full answer...
• How to Pick Out the Correct Ball Mount for a 2011 Toyota Camry to Tow Trailer Level
  I attached an FAQ article to the right on how to pick out the correct rise/drop ball mount for a towing setup so that a trailer can be towed level. But based on the two dimensions you gave me you will need a ball mount with a 4 inch rise. For that you would want the part # 3594. As long as your trailer coupler takes a 2 inch ball the # 19258 would work well with the # 3594 so that your trailer can be towed level.
  view full answer...
• Hitch Ball Recommendation with 2 inch Diameter and 3/4 inch Shank
  For a 2 inch hitch ball that has a 3/4 inch threaded shank you'd want the part # 19258. I attached a review video for this ball for you to check out as well.
  view full answer...
• Trailer Hitch Receiver for 2017 Mazda 3 Sedan and Correct Ball Mount
  Since your 2017 Mazda 3 is a sedan, the trailer hitch receiver that fits is the Draw-Tite Trailer Hitch Receiver # 24912; the other hitch you mentioned is not a fit for the hatchback, which I confirmed with Draw-Tite for you. The hatchback and sedan have different bolt hole alignments which is why there are two different hitches depending on the model. We do have the rest of the parts needed for you to do some light towing with your '17 Mazda 3 sedan, and to make it easier to order,...
  view full answer...