Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
(221 reviews)
Price: $188.21
In Stock
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Item # 24808
Retail:$384.99
Our Price: $188.21
You Save: $196.78
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (221)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch - 24808
- Class I
- 1-1/4 Inch Hitch
- 2000 lbs GTW
- Visible Cross Tube
- Draw-Tite
- 200 lbs TW
- Custom Fit Hitch
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Drawbar and pin and clip sold separately
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class I
- Maximum gross trailer weight: 2,000 lbs
- Maximum tongue weight: 200 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
24808 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe
60894 Hidden Hitch Class 1 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2004 - 2009 Toyota Prius
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Did not fit
- Did not arrive in time
Customer Reviews
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - 24808
Average Customer Rating: 4.8 out of 5 stars (221 Customer Reviews)
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.by: SFClark10/12/2023
2005 Toyota Prius
Great product, but the bolt holes didn't line up! Luckily I had a hydraulic jack and a 2x4 that I could use to bend the part with bolt holes by spreading the two side pieces. That worked great and I installed the hitch successfully.
by: James 07/18/2023
Once I got the rusted bolts off the vehicle I was putting this hitch on, the installation went very quickly. Everything fit as it was suppose to! I really can't comment on the towing ability of the hitch, since I only installed it to use for a hitch mounted bicycle rack, But it works great for bike rack.
by: Brian06/01/2022
Toyota Prius
I actually only owned this for 2 months since my car was totaled and I didn't take it off... But I did take a 30 hope road trip and hauled cargo and a bicycle with it and it did really well!
I ended up buying the same model Prius and I opted for the "EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2"“ so that I didn't have to use the converter since all of my attachments are 2".
I like them both. If you order the EcoHitch, be prepared to wait! I waited 6 months, but that was ok with me since I didn't do much with it during the cold months...
by: srpinaz12/23/2013
So, let's start with the good. Etrailer packed the item well. It wasn't just thrown in a box like the last hitch I ordered.
Now the bad. This hitch is very poor quality. The hitch pin is not straight or square, so anything I put in it is going to be off to one side. Also, the hitch pin plate and chain clip are also welded crooked. Lastly, they painted over the welding tailings and whatever else was on this rack when coated. All they had to do was simply wipe it off before painting. It looks like it has boils all over.
In the end, I think whoever assembled this rack was either intoxicated, or just didn't care.
Needless to say, I will never buy a drawtite product again due to low quality. I wish return shipping didn't cost so much, because I would love to return this piece of... junk!
See my pics of the issues. I hope this helps others in their decision to not by this rack, and be careful buying a rack online.
by: Tim10/17/2022
It was made high-quality and it was easy to install I absolutely love it
Tim
10/18/2023
A great quality product, and it was easy to install. I’m very happy with it. Thank you.
Mike L.
11/8/2023
@Tim Great to hear that, thanks for getting back with us!
by: Arthur 07/29/2023
Well made, fit like a glove! All bolt holes lined up perfectly. I have a 20k# car lift in my shop so installation was a breeze. I wouldn't hesitate to buy this again if needed.
by: Tim12/04/2018
2005 Toyota Prius
This is the second Hitch I have bought from etrailer and I couldn’t say enough good things about them.
The customer service is excellent, the hitch is of the highest quality, as sturdy as any hitch out there, and the price is excellent.
Tim
12/5/2019
Awesome hitch, fast shipping and super easy to install!
by: Ernest06/21/2023
Well made but welding slag could be removed better and better packing is recommend so two have prevented scratching and chipping of the black coating.
Jenny N.
6/21/2023
I will have our Customer Service team reach out to you. I recommend touching up the hitch with a rust resistant paint like Rustoleum before installing.
by: Fred H.11/03/2016
2006 Toyota Prius
I bought the draw tite hitch and Pro series Q slot platform 2 bike rack to be able to transport our 2 bikes with our Prius. The products were delivered in just a few days. The hitch was easily installed and the rack was very easy to assemble and use. I am very satisfied with my experience with etrailer.com. I highly recommend them.
by: Ellen08/14/2021
I got the hitch needed for the swagman bike rack I ordered. It fits and has held up fine. There is some wiggle and sway - it's not as tight as I expected, but I don't know how tight it could be to be able to insert the rack. No problems driving on highways and local roads. Just unnerving seeing the movement in my rearview mirror.
Ellen
8/15/2022
Same jiggle but keeping the bike on along with the locking arm. One suggestion: I got the smaller hitch, but it was too small to haul a uhail trailer. So I would get the larger more standard hitch, just in case you may want to haul something in the future.
by: Bruce07/20/2018
2008 Toyota Prius
This is the second hitch I have purchased etrailer.com and installed myself. In each case the hitch arrived quickly and was easy to install. In both cases, I also used the video installation instructions provided on etrailer.com's website. Finally, both hitches were the best priced I could find on the Internet. When and if I need another hitch, I will visit etrailer.com again.
by: Tim Chan09/15/2013
Another excellent product from etrailer. Super easy installation with paper instruction and video by etrailer. Took me 30 minutes to install. Like other have said, cutting the plastic under tray took the longest time. Highly recommended.
by: Jacqueline G09/07/2014
2008 Toyota Prius
Purchased this Draw-Tite Sportframe Trailer Hitch 24808 for our 2005 Toyota Prius, to use with platform style Saris Freedom SuperClamp 2 bike rack. My husband installed this in about 30 minutes, with no problems. We found that watching both the videos at etrailer.com for installation on the 2005 and 2008 Prius models (same hitch model #) were helpful prior to installation. The information on etrailer.com was great for helping me choose the right hitch for our 2005 Prius
Jacqueline G.
6/1/2016
Working perfectly for bike rack on our Prius!
by: Jesse H07/22/2015
Great trailer hitch and Yakima bike rack combo from etrailer. Fast Shipping! Used on a 4 hour each way vacation, no problems. Install only took me 45 minutes, clear directions and their most basic hitch seems well protected paint wise. Nice work etrailer, did not think I was going to get away with spending so little for quality hardware!
Jesse H.
8/5/2016
Still using with no issues, now pulling small trailer as well. May the Force stay with it!
by: Ben04/15/2022
I used in conjunction with a hitch cargo carrier. It dramatically increased my ability to carry camping gear, or carry luggage when all the passenger seats are full. What is better, it doesn’t reduce your gas mileage as much as a roof box because it is within the streamline of your car, and doesn’t increase aerodynamic drag.
by: J S. T.06/16/2013
2005 Toyota Prius
Shipping was quick. Install was not bad. The plastic pan came off easily and I enlarged the hole with a jig saw. I cut about 1-1/2" toward the driver and another 1" to the driver side. It needed another 1/2" toward the rear end, once I had it reinstalled, but I cut that with a utility knife. I didn't use a jack to lift it. I balanced it on two 4x4s to start the passenger-side bolts. Then I lifted the other side with a 4x4 block on end. That got it close enough that I could lift it the last bit and start the driver-side bolts. Took about a half hour, but I work slowly.
J T.
6/27/2014
Having used the trailer wiring and hitch a few times over the past year, I am quite satisfied with both. In the installation of the wiring, I was unprepared in that the process messed with my electronic door locks and I had to get them reprogrammed. Otherwise, no problems.Thanks again!
by: David01/25/2023
2005 Toyota Prius
Product was shipped fast and overall looks like it was put together well. Too bad it was chipped in about 10 different places because of poor packaging. The box was twice the size it needed to be so it was obviously bouncing around in the there during transport. If it wasn't going on a beater car that I don't really care about I'd send it back. Not sure I'd ever order again.
Jenny N.
1/28/2023
I think what happened is that when these hitches are shipped to us they are shipping in large pallets which does cause scratches to the hitch. I will have our Customer Service team contact you. What I recommend is touching up the hitch with a rust resistant paint before installing.
by: richard02/07/2013
2007 Toyota Prius
Installed on 2007 Prius in approximately 20 minutes, laying on the ground, on my back without the car jacked up - I weigh in at ~220lbs. The installation instructions were unnecessary, as assembly is incredibly straighforward. Forget the razor knife and use tin snips to cut the composite shield. I highly recommend this product.
Also bought the T-One Connector. Again, the assembly could not be easier. Complete installation took no more than 20 minutes. I highly recommend this wiring harness.
Just completed a 600 mile trip and everything worked perfectly, as expected.
Richard
2/12/2014
I have had no issues with the hitch or wiring connectors.
by: Jw08/13/2018
2007 Toyota Prius
On time, as advertised. Good fitment, good rewiring instructions. Thank you
by: LT07/17/2022
The ordering and confirmation information was easy and efficient. The cost and shipping were among the most competitive overall prices I was able to find. The video tutorials were extremely helpful as we had to cut out a small piece of the rear shroud to fit the hitch. This was clearly outlined and demonstrated in the video.
by: NA04/19/2022
Used it on a gen2 Prius for a 1up bike rack carrying a 50lb electric bike. Drove all over, never had issues. Installed myself using the video, took less than an hour.
by: Dave R - Vancouver05/08/2018
2009 Toyota Prius
installed perfect on my 2009 prius, great product
for those who buy this there is a stop tab in the hitch so not just any hitch will work
it has to be the same rating or the lock pin falls short of matching
my wife's yaris hitch works perfect
thanks etrailer!
Mike L.
5/10/2018
The obstruction you speak of is a stop or a punch thats intentionally placed in the receiver tube that prevents higher-rated Class ll accessories from being used. Draw-Tite does this with their Class I hitches as a safety measure to prevent the hitch from being accidentally overloaded. The stop or punch is designed to prevent a Class II rated accessory from being slid into the receiver far enough for the hitch pin holes to line up.
by: John11/26/2018
Fast shipping on product. Very good installation instructions.
Did notice that the receiver is NOT square with the cross frame itself, this has been noted over a year ago by other consumers and has not been corrected. As I use my hitch for mounting my bike rack on it is not an issue however if one was to be pulling a small trailer it would be tracking at an angle, rough on tires and the hitch. Also the mfg might think of reinforcing the outer edges of the receivers as they tend to distort over time. I have a hitch that weights about 25 lb and both bikes combined with hitch are about 100 lbs load.
Other then that the hitch pretty much is a good value and a easy install on my 2005 Prius
by: Kermit 06/09/2023
2007 Toyota Prius
Quick delivery
by: S Jansen09/22/2016
2005 Toyota Prius
We used our hitch for the first time today and it was great! A perfect match with the Yakima "two timer" platform bike rack. Ordering from etrailer.com was easy and I felt confident that it was the correct product and that we could install it ourselves on our 2005 Prius. The website installation videos really helped. We were a little concerned about not knowing if the bolts were torqued properly. (We don't own that tool) So we went to have our tires rotated the same day we installed the hitch and asked if they would mind checking them for us. No problem. You could probably go to your regular auto shop and ask them if you needed to. Overall easy to install, not at all complicated. Would recommend to friends, went for an excellent ride today!
25
221
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Does Appearance Panel of 2006 Toyota Prius Need to be Removed to Install Draw-Tite Hitch #24808If it was my vehicle I would just leave the appearance panel off of the 2006 Toyota Prius after installing the # 24808. Like the mechanic said, it's not going to affect mileage or corrosion or anything so it wouldn't be worth it to me to put back on. That being said, if you have the panel and want to reinstall it you certainly could by trimming it. We don't have a template but we do have a drawing I took from the install instructions that I attached to this page.
view full answer...
- Trailer Hitch with 200 lb Tongue Weight Needed for a 2007 Toyota Prius We do have trailer hitches available for your 2007 Toyota Prius that have a 200 lbs Tongue Weight (TW) rating. I recommend going with the Draw-Tite Sportframe Trailer Hitch Receiver # 24808 which is a Class I, 1-1/4" hitch receiver which has that 200 lb TW rating that you are asking about. I have attached a video of this trailer hitch being installed on a similar Prius for you to check out. I looked up an online version of the owner's manual for your Prius and on page 344 it states that...
view full answer... - Hitch Recommendation for a 2006 Toyota PriusThere are only Class I hitches available for your 2006 Prius. The most popular one we carry is the Draw Tite Hitch part # 24808. I attached an FAQ article on hitch classifications for you to check out to give you a better idea on why they don't make a Class III for your vehicle.
view full answer... - Trailer Hitch for a 2014 Toyota Prius 2Draw-Tite trailer hitch # 24808 fits 2004 to 2009 Toyota Prius models but not a 2014. For a 2014 Prius you can use # 24847. It fits the 2014 Prius 2, 3, and 4 models so it will fit your Prius 2. I have linked a video to the right showing installation for you.
view full answer... - Trailer Hitch Recommendation for a 2004 and a 2014 Toyota PriusWe sell hitches that will fit both a 2004 Toyota Prius and a 2014 Toyota Prius, but since the vehicle changed quite a bit between those two years the hitch designs had to change as well. For the 2004 Prius you would want the part # 24808 and then for the 2014 you would want part # 24847. I attached install videos for both hitches for you to check out as well.
view full answer... - Which Trailer Hitch to Use for Carrying a Cargo Carrier on a 2008 Toyota PriusAll of the trailer hitches for the 2008 Toyota Prius are going to basically install the same and appear the same once installed. I apologize for any confusion on whether or not the crosstube will be visible. For carrying a cargo carrier the best hitch available will be the Draw Tite part # 24808. This carrier does not require the use of a stabilizer strap like the Curt option does and does not include a ball mount that you wouldn't need like the Hidden Hitch does. The part # C18145 is...
view full answer... - Can Lubricant be Used to Help With Installing Bike Rack Into Hitch ReceiverIf you are having trouble installing your hitch mounted bike rack into a trailer hitch receiver, like the Draw-Tite # 24808 for your 2009 Toyota Prius, then I'd first recommend making sure that the receiver is cleaned out and free of debris. If it is clean then there may just be some extra powder coating on the inside. We have had customers who tried filing it out but you can definitely try some WD40 first if you have some handy.
view full answer... - Hitch and E-Bike Rack Solution for 2008 Toyota PriusFor your 2008 Toyota Prius the Draw Tite Hitch part # 24808 is a confirmed fit and can be used to carry an e-bike rack but since hitch adapters cut the capacity of the hitch by 50 percent when they are used I can't recommend you go that route on an already lower capacity hitch and vehicle. Your best option is an e-bike rack that is Class I hitch compatible. For a bike rack the Thule EasyFold XT part # TH903202 would be a great solution that will fit this hitch directly as it is Class I...
view full answer... - Which Draw-Tite Trailer Hitch Receiver Fits a 2015 Toyota PriusThe Draw-Tite # 24847 is a fit for your 2015 Toyota Prius. The # 24808 is actually for older models of the Prius from 2004 to 2009. Another hitch that fits is part # 24967. The insallation is more detailed and time consuming but in the end I prefer this style. It's a much cleaner look because the cross tube is hidden behind the Toyota's bumper and all you see is the receiver tube underneath. Look at the darker colored Prius in the pictures, as opposed to the blue Prius where you can...
view full answer...
- Lightweight Trailer Hitch Recommendation for 2005 Toyota PriusThe best hitch for your 2005 Toyota Prius that would work well for your situation is the Draw Tite part # 24808 that you referenced. It is a confirmed fit and would have the capacity needed for a 75 lb chair. The hitch weighs 28 lbs. Then for a carrier we have the Curt part # C18110 which would fit the hitch and have capacity needed for the chair.
view full answer... - Assisted Kayak Carrier Recommendation for Factory Crossbars of 2019 Subaru AscentThe assisted kayak carriers are a bit more expensive but you could go with two of the Malone SeaWing Kayak Carrier and Load Assist w/ Tie-Downs # MPG113MD which is a fit for your 2019 Subaru Ascent and since the rack is wider it could fit on the opposite ends of the crossbars and have space for both. It's a rear loading assisted setup. I attached a review video for more info on this carrier for you to check out as well.
view full answer... - Trailer Hitch and Bike Rack Recommendation for a 2009 Toyota Prius and Day6 Electric BikeIt looks like the best option for carrying the bike on your 2009 Toyota Prius is to use a trailer hitch, like # 24808, that you have referenced, and then use a platform bike rack. I have included a link to the installation instructions and a link to a video installation for the hitch for you. We have one bike rack that will fit the Class I hitch for the Prius and carry a bike that has a long wheelbase. Take a look at the Swagman XC-Extended Platform-Style 2 Bike Carrier, # S64650-EXT....
view full answer... - Adapter to Use Erickson Big Bed Junior Load Extender with a 2008 Toyota PriusThe use of a hitch expander, # HTAD, will reduce the tongue weight capacity of the trailer hitch # 24808 on your 2008 Toyota Prius by 50 percent. The tongue weight capacity of the hitch starts out at 200 pounds but by using the expander it would be reduced to 100 pounds. This means that the total weight on the hitch cannot exceed 100 pounds like you said. The Erickson load extender # EM07605 weighs about 26 pounds. That means that the amount of weight from the canoe on the extender cannot...
view full answer... - Distance From Hitch Pin Hole to End of Receiver on Draw-Tite and Curt Hitches for 2005 Toyota PriusFrom the hitch pin hole to the end of the receiver tube of the Curt # C11468 is 1-7/8 inches and the same measurement on Draw-Tite # 24808 is 2-1/8 inches. They're both a Class I hitch receivers so you'll need to use accessories specifically designed for Class I. You should know, the Curt hitch requires you to use a support strap, # 18050, when using the hitch to carry a bike rack.
view full answer... - Cargo Carrier Recommendation for a Toyota Prius V 2013Any time you use a hitch adapter you end up cutting the capacity of the hitch in half so I would recommend you get a cargo carrier that is designed to work on 1-1/4 inch hitches like the 17x46 Curt Cargo Carrier # C18145. I attached a review video that shows this carrier being used on a similar Prius as yours. Since you have a Curt hitch and Curt recommends the use of a stabilizer strap for any unsupported loads like a cargo carrier you will also need part # 18050. I attached a review...
view full answer... - Hitch and Bike Rack Recommendation for a 2005 Toyota PriusThe Draw Tite hitch part # 24808 would be the correct hitch for your 2005 Toyota Prius. Now since this is a Class I hitch and they can only carry a maximum of 2 bikes on a bike rack your options will be somewhat limited. The Thule Doubletrack part # TH92BJ would be a great option.
view full answer... - Trailer Hitch Comparison for the 2010 Honda Accord Coupe Single ExhaustThe Curt Class I Trailer Hitch, item # C11496, is designed to fit the 2008 to 2013 Honda Accord and the 2009 to 2013 Acura TL and TSX. The # 24808 hitch that you mentioned is designed to fit the 2004 - 2009 Toyota Prius, so it will not work on the 2010 Accord Coupe single exhaust.
view full answer... - Why Isn't There a Cutout In the EcoHitch for a 2005 Toyota Prius for ExhaustThe EcoHitch Hidden Trailer Hitch Receiver part # 306-X7196 is a great option for a 2005 Toyota Prius. It will sit up above the exhaust so there isn't a need for a cutout in the cross tube like the Draw-Tite Sportframe Trailer Hitch Receiver part # 24808. If you look closely, the brackets are much shorter on the EcoHitch as well as the receiver tube being under the crosstube as opposed to the Draw-Tit which has much longer brackets and the receiver tube is attached to the crosstube.
view full answer... - Trailer Hitch and Wiring Recommendation for 2009 Toyota PriusThe only way you'd be able to transport a small scooter with a Prius like your 2009 model is with a hitch and small trailer. The vehicle is not designed for carrying 250 lbs vertically at the rear. For a hitch you'd want the Draw Tite part # 24808, for a ball mount # 3593, for trailer wiring # 118505, and then for a hitch ball # 19256.
view full answer... - Recommended Trailer Hitch Receiver on 2005 Toyota Prius to Carry a Bike RackFor your 2005 Toyota Prius I recommend the Draw-Tite Sportframe Class I Trailer Hitch Receiver # 24808. This features a 2000 pound towing capacity and 200 pound tongue weight. I prefer the Draw-Tite because it does not require the use of a support strap when carrying items like bike racks which the Curt hitch will. The Swagman XTC-2 # S64670 is a great rack for you because it will fit the 1-1/4 inch Class I hitch on your Prius. If you're interested in a Locking Anti-Rattle, Threaded...
view full answer... - Recommended Way to Carry E-Bikes with 2005 Toyota PriusWe have a great way to carry 50 lb e-bikes with your 2005 Toyota Prius but none of the trunk mounted bike racks have the capacity for an e-bike as the highest capacity trunk racks are rated for 35 lbs per bike. So instead you'd want the Thule EasyFold XT # TH903202 which is a hitch mounted bike rack. Then for your 2005 Prius you'd want the hitch # 24808 and you'd be set.
view full answer... - Installation Of Hitch On 2013 Toyota PriusThe hitch you need for your Toyota Prius depends on the style of Prius you own. I would first recommend checking either with your owner's manual or with your dealership to find what the towing and tongue weight capacity is for your vehicle. For the Prius or Prius Plug-In Hybrid, I would recommend the Curt Trailer Hitch, part # C11276. This is a Class l hitch with a 1-1/4 in receiver. It has a towing capacity of 2000 lbs and a maximum tongue weight capacity of 200 lbs. The installation...
view full answer... - What Hitch and Wiring is Need for a 2007 Toyota Prius and How do I InstallWe carry 2 hitches for your 2007 Toyota Prius, part # 24808 and # 11468. I have included links to these hitches and their instructions below. We also have a video of one of these hitches being installed on a 2006 Toyota Prius. Your 2007 Prius can be wired for towing a trailer, but there is not a plug and play type harness available for it. You will need to locate the tail light wires in the trunk, identifying them with a circuit tester, and then splice the harness into them. There is...
view full answer... - Hitch and Cargo Carrier Recommendation for a 2004 Toyota PriusSince fuel mileage is a concern you are going to want to go with a hitch and a hitch mounted cargo carrier over a roof rack option. For a hitch I would recommend the Draw Tite Hitch part # 24808. This would work well to support a cargo carrier. For a cargo carrier your best value would be the Curt Cargo Carrier part # C18145. For a stretchable cargo net to secure your items to the carrier you would want the part # C18200. Everything I recommended is very economically priced. The hitch...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Joe B
Test Fit:
Robert C
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Sue W
Video by:
Kathleen M
Video by:
Alan C
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Jenny M
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Patrick B.
12/26/2013
We will be in contact with Draw-Tite on the matter and we will follow up with you.