Install Hardware Recommendation for a Draw Tite Hitch on a 2000 Toyota Camry

Question

Question:

what bolts size does my 2000 camry need to install hitch or use existing? thanks

asked by: Keith M

0

Expert Reply:

To install the Draw Tite Hitch part # 36336 on your 2000 Toyota Camry you would need to use the included install hardware that is M10 x 1.25 x 30 mm.

Or if you wanted us to send you all new install hardware for this hitch you would need part # RHK. On the product page you would enter Draw Tite as the manufacturer and 36336 as the part number and we'll ship you out all the needed hardware to install this hitch.

expert reply by: Jameson C

0

Answer 1

Yes, we do have the Replacement Hardware Kit for Trailer Hitches, #RHK, which is the part number you will need to order. You will just specify the hitch model number (36336) and the manufacturer (Draw-Tite) in the boxes provided on that part number…

view full answer...

Answer 2

The easiest way to get the complete installation hardware you would need for your 2004 Toyota Camry would be to go to the product page for Replacement Hardware Kit #RHK, enter the part number of the hitch you have (C12339), select the hitch…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 7

Hey Mark, thanks for reaching out, and good question. That “16/18 gauge” wording throws a lot of people off. The TowSmart 16 to 18 Gauge, 4 Conductor Wire #TS57QR isn’t all one size. It’s a 4-conductor cable with mixed gauges inside, two wires are 16…

view full answer...

Install Hardware Recommendation for a Draw Tite Hitch on a 2000 Toyota Camry

Products Featured in This Question

Continue Researching