See what our Experts say about this Redline Accessories and Parts

• Verify Trailer Suspension Part Fit 3500 lb Axle
  Hey Ryan, I don't have a way to look at your shopping cart as odd as that sounds. Could I get you to list the part numbers you are looking at so I can confirm if they will work for you?
  view full answer...
• What Mounting Hardware Do I Need for the Terran Industries # TX97ZJ Trailer Brakes?
  Hello Jeff, Thanks for writing in! To install your Terran Industries Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand - 3.5K # TX97ZJ, you will also need the Mounting Hardware for 10" Single Brake Assembly # BRKH10BS. This kit includes the four 7/16"-20 mounting nuts and lock washers needed to secure one brake assembly to the axle flange, so you'll need one kit per brake assembly. If you're replacing both brake assemblies with the # TX97ZJ kit, be sure to order two of...
  view full answer...
• Parts Needed to Add Electric Brakes to a Dexter Torflex #9 Axle?
  Most 7 inch hub drums aren't compatible with 14 inch wheels, but the Dexter # 8-257-5UC3-EZ is an exception because it will adequately support the wheel. This hub uses the L44649 inner and outer bearing which is compatible with the spindles on your Torflex # 9 axle beam. The bearings, races, grease seal, grease cap and lug nuts are included. The hub/drums are sold individually. You'll also need a left hand brake assembly, like # 23-47 and a right hand like # 23-48. The assemblies have...
  view full answer...
• Replacement for Mobile Home Axle on Hudson Flat Bed Trailer
  We do have some off-the shelf axles that exactly match the hub face to hub face and spring center to spring center distances you mentioned. We offer 3 different capacities: For a 3500 lb axle, use # T3584F-EZ-8974. For a compatible idler hub (no brakes) use # 84545UC1-EZ for a hub/brake drum, use # AKHD-545-35-EZ-K. the idler hub and the hub/drum have a 5 on 4-1/2 inch wheel bolt pattern, which is common for a 3500 lb axle. For compatible brake assemblies, use # AKEBRK-35R-SA for the right...
  view full answer...
• Best Electric Drum Brake Replacement for 3,500 lb Axle Dump Trailer
  Hi Tyler, great question. For your 3,500 lb axles, you’re going to be using the standard 10 inch by 2-1/4 inch electric drum brakes with a 4 bolt mounting pattern, which is the most common setup and makes replacement pretty straightforward. A solid, reliable option is the etrailer brake kit part # AKEBRK-35-SA that you were looking at. These are self-adjust so you don't have to crawl under and adjust them. The hardware for these assemblies is part # BRKH10BS if you are needing new hardware....
  view full answer...
• Replacement Brakes For A Boat Trailer With No Salt Water Use
  Yes, The Hydraulic Trailer Brake # AKUBRK-35R can be used on your boat trailer and will give you no problems when submerged. The # AKUBRK-35R is the right hand side. The left hand side # AKUBRK-35L is the matching set needed. The mounting bolt spacing is a 4 bolt and has 2-7/8 inches between each bolt. The brakes are 10 inch in diameter and 2-1/4 inches wide, and have an axle rating of 3,500 pounds. Nuts and lock washers # BRKH10BS are sold separately. I attached a review video link below.
  view full answer...
  
• Replacement Brake Shoes for 10 Inch Self Adjusting Electric Brakes
  For your 10 inch self-adjusting electric brake assemblies, we have the Replacement Brake Shoes for Dexter 10" Nev-R-Adjust Electric Brake - 3,500 lbs # K71-682 for the right hand, and # K71-681 for the left hand. Or, for only a few bucks more, you can replace the entire brake assemblies with our part # AKEBRK-35L-SA for the left hand, and # AKEBRK-35R-SA for the right hand. This is the entire backing plate with the new brake shoes, springs, magnets, and mounting bolts already assembled...
  view full answer...
• Hub and Drum and Brake Assemblies Rated for 3,500 lbs
  We have exactly what you need, so long as your current hub uses an # L68149 inner bearing and # L44649 outer bearing, which you will be able to tell when you remove your current hub assembly as the bearing numbers should be printed on the bearing themselves. If that is the case the exact parts you need are: - Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3 OR, if you have an E-Z Lube axle: - etrailer Trailer Hub and Drum Assembly for 3,500-lb...
  view full answer...
• Does Lippert ABS Brake Assembly For 3,500lb Axles # LC73PX Come With Pair In One Kit?
  Great question, Travis, the Lippert 10" 3,500lb ABS electric brake assembly # LC73PX is for a pair of brakes, one left-hand and one right-hand assembly. It’s all boxed together and includes the mounting bolts for both sides. If you’re doing a full axle swap, that’s exactly what you need. Just don’t forget the # BRKH10BS hardware kit nuts and lock washers if you're replacing everything from scratch. Are you planning to do both axles or just one? If you just need one, we have left # LC92NX...
  view full answer...
• Replacement Boat Trailer Brakes Rated for 3,500 lbs
  Thank you for that info and I definitely recommend replacing your boat trailer's brakes and we have exactly what you need. Based on the Dexter 8-247 number you gave we know you have a 3,500 lb Dexter 10" Hub and Drum Assembly such as part # 84546UC3. For a hub and drum that size the best option is the Hydraulic Trailer Brake - Dacromet because they are designed for marine applications with their corrosion-resistant dacromet coating and mount to a 4-bolt mounting flange such as # 4-35....
  view full answer...
• Are Electric Trailer Brake Assemblies Specific to Drivers or Passenger Side of Trailer
  The etrailer brand 10 inch trailer brake assemblies like # AKEBRK-35L-SA are side specific. For the left you'd use # AKEBRK-35L-SA and # AKEBRK-35R-SA for the left. How to tell the difference? Hold the brake assembly so the magnet is at the bottom. Then look at the back of the brake assembly. If the brake magnet wires exit the backing plate on the left, it's a left hand (driver's side) assembly. If they exit on the right, it's a right hand (passenger side) assembly. Many times the brake...
  view full answer...
  
• Single Hydraulic Brake Line w/ Male & Female Fittings For Right Hand 10 Inch Hydraulic Brake
  The Demco Hydraulic Brake Hose with Fittings - 18-7/8" Long # DM05982 has the incorrect fittings for the Hydraulic Trailer Brake - Uni-Servo - 10" - Right Hand - 3,500 lbs # AKUBRK-35R. The hose that has the correct 3/8" fittings and male and female ends like the Demco is the Titan Hydraulic Brake Line with Fittings - 25" Long # T0980100 or 18-25/32" Long # T0776500. Also wanted to mention that the # AKUBRK-35R does need Mounting Hardware # BRKH10BS.
  view full answer...
• Availability of 10 Inch Diameter Brake Assembly for Hub/Drum with 6 on 5-1/2 Bolt Pattern
  We do indeed have brake assemblies that would be compatible with a 3.5K axle using a 10 inch hub/drum with a 6 lug on 5-1/2 inch bolt circle. For a right hand assembly, I'd recommend self-adjusting brake assemblies # AKEBRK-35R-SA for the right side and # AKEBRK-35L-SA for a left hand. The assemblies are compatible with a standard 4 bolt mounting flange. Mounting hardware is sold separately as part # BRKH10BS. If you're needing brake drums as well, you'll need # AKHD-655-35-EZ-K which...
  view full answer...
• Needing 3500 lb Hub/Drum With 5 on 5 Bolt Pattern
  You're correct, a hub/drum with a 5 on 4-1/2 inch bolt pattern wouldn't be compatible with your existing wheels. For a hub/drum for a 3500 lb axle with a 5 on 5 bolt pattern, I'd recommend the # AKHD-550-35-EZ-K. This hub/drum is compatible with the spindles typically found on a 3500 lb axle, which uses a L68149 inner and L44649 outer bearing and a 58846 grease seal. The hub includes the inner and outer bearings, inner and outer races, the grease seal, dust caps for a standard and E-Z...
  view full answer...
• Brake Installation Hardware and Torque Required for 10-Inch Drum Brakes
  Electric drum brakes such as # AKEBRK-35L-SA will use nut/lock washer hardware kit # BRKH10BS and the nuts should be tightened to 45 to 50-ft-lbs. If you need a torque wrench we offer several such as # ALL644044 as well as Torque Adapter # PTM206 which fits any 1/2-inch ratchet.
  view full answer...
  
• Is Hub/Drum Included with 3500 lb AKEBRK-35L-SA Trailer Brake Assembly
  The hub drums are sold separately. The # AKEBRK-35L-SA (left side) and # AKEBRK-35R-SA (right side) self-adjusting trailer brake assemblies are intended for a 3500 lb capacity axle. The # BRKH10BS mounting hardware is sold separately. Typically, a drum for a 3500 lb axle would have a 5 lug on 4-1/2 inch bolt circle and would use a L68149 inner and a L44649 outer wheel bearing, although the wheel bolt pattern could possibly be different. If your existing hubs have the 5 on 4-1/2 bolt pattern,...
  view full answer...
• How to Determine 3,500 lb Electric Brake Assembly Fitment
  The Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs # AKEBRK-35R-SA and Left Hand # AKEBRK-35L-SA may be a fit for your 2016 Heartland Mallard M32 though you do need to ensure you have the correct weight capacity, drum size and brake mounting flange. However, since you referenced a part number for brakes that fit trailers for axles before 2009, you may be talking about a kit from Dexter for 4,400 lb axles. Since you have a 2016 trailer they would not fit,...
  view full answer...

Do you have a question about this Accessories and Part?