Verify Trailer Suspension Part Fit 3500 lb Axle

Updated 08/18/2026 | Published 08/17/2026

Products Featured in This Question

Mounting Hardware for 10" Single Brake Assembly

(75)

$4.68

etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs

(780)

$120.17

Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased

(1943)

$108.43

U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts

(2228)

$79.34

4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long

(2383)

$58.55

Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs

(1192)

$218.85

Question:

I have my cart filled with an assortment of brake parts and suspension parts. I just want to confirm they will all fit my horse trailer correctly. I have measure my leaf springs eye to eye is about 25 1/4, or center pin to center eye is about 13in both directions. Brake assembly width is 9 3/4 wide 3500lb axles, with 4 studs. Double eye leaf springs tandem axle. My drums are 6 lug, standard electric brakes. Axles sit on top of leaf springs. I think that is all details. Are you able to review and double check all of this is correct?

asked by: Ryan R

Expert Reply:

Hey Ryan, I don't have a way to look at your shopping cart as odd as that sounds. Could I get you to list the part numbers you are looking at so I can confirm if they will work for you?

expert reply by: Jameson C

Ryan R.

8/17/2026

AKHD-655-35-EZ-K Qty. 4 e54SR Qty. 4 K71-359-00 Qty. 1 APUBR-1. Qty. 1 AKEBRK-35 Qty 2 BRKH10BS. Qty 4

Jameson C.

8/18/2026

@RyanR Everything looks good! It's all correct for a 3,500 lb axle and the suspension components are also all correct in length as well. Worth mentioning is the u-bolt kit is only enough for one axle.