Parts Needed to Add Electric Brakes to a Dexter Torflex #9 Axle?
Updated 01/08/2020 | Published 01/07/2020
Products Featured in This Question
Question:
I have a 2015 Little Guys Silver Shadow 5X10 tear trailer to which I want to add electric brakes from scratch. The axle is a Dexter Torflex #9, either 2,000 lb or 2,200 lb I cant read the imprint, and it has the 4 bolt brake flange already installed. The dry weight of the trailer is about 1,200 lbs. It has 14 inch wheels in a 5X4.5 pattern. I havent disassembled it yet to get a bearing part number. I previously bought and installed the seven pin harness and brake controller from you. Now I need the rest of the parts. The 7 inch electric brakes and hubs Im looking at online seem only recommended for 13 inch or smaller wheels. Can you make a recommendation? Aside from two electric brakes and two hubs/drums is there anything else I need to buy to complete the installation? Seal, bearings, etc?
asked by: Dave B
Expert Reply:
Most 7 inch hub drums aren't compatible with 14 inch wheels, but the Dexter # 8-257-5UC3-EZ is an exception because it will adequately support the wheel.
This hub uses the L44649 inner and outer bearing which is compatible with the spindles on your Torflex # 9 axle beam. The bearings, races, grease seal, grease cap and lug nuts are included. The hub/drums are sold individually.
You'll also need a left hand brake assembly, like # 23-47 and a right hand like # 23-48. The assemblies have mounting studs, and the necessary mounting hardware is included.
I'd also recommend a wiring upgrade kit like # HS381-9000. You'll also need some # 10-1-1 wire to run the brake lines from the junction box to the brake assemblies. Keep in mind that the wire color code in the included trailer connector is different that usual.
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Q&A: Correct Bearing Kit for Dexter 2,000 Lb Torsion Axle SLR P-12
- Shop: Karrier ST175/80R13 Radial Trailer Tire w/ 13" White Mini Mod Wheel - 5 on 4-1/2 - Load Range D
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Shop: Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 4 on 4 - Load Range B
- Search Results: galvanized trailer brakes
- Shop: Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44649 - Pre-Greased
- Q&A: Brake Controller Wiring Harness to Install Reese Towpower 8508211 in 2019 Ford Flex
- Shop: Easy Grease Trailer Hub and Drum Assembly for 2K Axles - 7" - 5 on 4-1/2 - L44649 - Pre-Greased
- Shop: Dexter Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs to 2,200 lbs
- Search Results: dexter ez lube
- Q&A: Mounting Plate Dimensions for Ark XO Drop Down Corner RV Stabilizer Jacks
- Article: How to Raise Your Travel Trailer Height
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Replacement Hub, Drum and Brake Assemblies for AL KO 3,500 lb Axle