Is Hub/Drum Included with 3500 lb AKEBRK-35L-SA Trailer Brake Assembly

Published 01/11/2020

Products Featured in This Question

Electric Trailer Brake Assembly - Self-Adjusting - 10" - Left Hand - 3,500 lbs

(368)

$66.56

Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs

(374)

$55.78

Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased

(1835)

$105.75

Mounting Hardware for 10" Single Brake Assembly

(74)

$4.51

Question:

Are the Hub/Drums Included with 3500 lb AKEBRK-35L-SA Trailer Brake Assembly

asked by: Don F

Helpful Expert Reply:

The hub drums are sold separately. The # AKEBRK-35L-SA (left side) and # AKEBRK-35R-SA (right side) self-adjusting trailer brake assemblies are intended for a 3500 lb capacity axle. The # BRKH10BS mounting hardware is sold separately.

Typically, a drum for a 3500 lb axle would have a 5 lug on 4-1/2 inch bolt circle and would use a L68149 inner and a L44649 outer wheel bearing, although the wheel bolt pattern could possibly be different. If your existing hubs have the 5 on 4-1/2 bolt pattern, I'd recommend the # AKHD-545-35-EZ-K hub/drum. The bearings, races, grease seal, grease cap and lug nuts are included.

If your wheel bolt pattern is different, such as 5 on 4-3/4, 5 on 5, 5 on 5-1/2 or 6 on 5-1/2, use the provided link to see the other hubs with different bolt patterns we offer for 3500 lb axles. If you're not certain of what bolt pattern your current hubs are, I'll link you to an article that explains how to figure it out.

expert reply by: Mike L