Availability of 10 Inch Diameter Brake Assembly for Hub/Drum with 6 on 5-1/2 Bolt Pattern
Published 01/10/2020
Products Featured in This Question
Question:
I have a the 3500 timbren axles and I was wondering if there is a electronic trailer brake assembly that has a 6 on 5.5 lug pattern.
asked by: Jason
Expert Reply:
We do indeed have brake assemblies that would be compatible with a 3.5K axle using a 10 inch hub/drum with a 6 lug on 5-1/2 inch bolt circle.
For a right hand assembly, I'd recommend self-adjusting brake assemblies # AKEBRK-35R-SA for the right side and # AKEBRK-35L-SA for a left hand. The assemblies are compatible with a standard 4 bolt mounting flange. Mounting hardware is sold separately as part # BRKH10BS.
If you're needing brake drums as well, you'll need # AKHD-655-35-EZ-K which is compatible with the L68149 inner bearing and the L44649 outer bearing. The hubs are sold individually, and include the bearings, races, grease seals, grease caps and lug nuts.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Recommended Timbren Axle-Less System with 5 on 5 Bolt Pattern Hubs for Overland Trailer
- Q&A: Installation of Emergency Break Away Cable Repair Kit for Dexter Axle A-60 Brake Actuators
- Q&A: Replacement 1998 PJ Utility Trailer Hub with QRG 3G and 84000 Stamped Into Hub
- Q&A: How To Use Toyota TRD Pro 17 Inch Wheels With Hubs On a Dexter 3,500 Lb Axle
- Article: Where to Position the Trailer Axle?
- Q&A: Recommended Replacement For A DICO 45263 Idler Hub
- Q&A: Compatible 6 Lug on 5-1/2 Inch Bolt Pattern Idler Hub and Total Drop of Timbren Axle-Less Suspension
- Q&A: Recommended Brake Assembly for 6,000 Pound Dexter Axle With 9 Bolt Brake Flange
- Article: How to Choose the Right Trailer Hitch Class
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Tire Sizing