Product Experts Available Now!
Call 1-800-940-8924
LubriPlate Poly HP-2 Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge
(102 reviews)
Price: $24.62
In Stock
LubriMatic
LubriPlate Poly HP-2 Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge
Part Number: L11465
In Stock
$24.62
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (102)
- Q & A (0)
- Photos
LubriMatic Lubricants Sealants Adhesives - L11465
- Brake and Bearing Grease
- Grease
- Standard Bearing Grease
- 14 oz
- LubriMatic
- Polyurea - Conventional
- Petroleum-Based
This LubriPlate Poly HP-2 polyurea-based grease meets high-temperature requirements for wheel bearings for all disc and drum brake applications. Formulated for improved bearing protection and longer electric motor life.
Features:
- Resists high temperatures for wheel bearings for all disc and drum brake applications
- Formulated with polyurea for improved bearing protection and longer electric motor life
- Made in the USA
Specs:
- Quantity: 14-oz cartridge
- Application: wheel bearings for disc brake and drum brake applications
- NLGI grade: #2 (about the consistency of peanut butter)
- Drop point: 500 degrees F
11465 Plews & Edelmann LUBRIPLATE Poly HP-2 from LubriMatic Wheel Bearing Grease for Disk and Drum Brake Applications - 14-oz Cartridge
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- etrailer mistake
Ratings & Reviews
4.8
102 reviews
by:
Matt W.
07/29/2013
Great Grease! I prefer this in trailer bearings that do not need marine grade grease.
I cannot buy this grease in tubes locally and only one store sells this by the small can. I made sure recently to purge the unknown grease out of my camper bearings and replaced with this brand as I know it and trust this product. I wanted to get tubes for my now dedicated grease gun for my trailers and etrailer was the only way to go.
etrailer has the best price and ordering tubes allows me to put the same bearing grease into my Bearing Buddies as I packed my bearings with.
I cannot buy this grease in tubes locally and only one store sells this by the small can. I made sure recently to purge the unknown grease out of my camper bearings and replaced with this brand as I know it and trust this product. I wanted to get tubes for my now dedicated grease gun for my trailers and etrailer was the only way to go.
etrailer has the best price and ordering tubes allows me to put the same bearing grease into my Bearing Buddies as I packed my bearings with.
by:
Tom G
08/23/2017
etrailer was where I found the Lubrimatic grease for my trailer bearings. The price was right and the shipping on a small order was only 4.99. This arrived in 3 days with standard shipping. Thanks for the great turnaround time.
Foster G.
8/24/2018
very good
by:
Mark E.
08/19/2014
Have used this grease for years, stands up good to water. It is all I use in the bearings on my off road trailer, never had a problem.
Mark E.
8/19/2015
still works great, no problems at all
by:
Jeff B
03/26/2016
Works great for trailer bearings, thanks, jeff
Jeff B.
3/26/2017
Its working great, no bearing failures, thanks !!
by:
Dave in Sedro Woolley
09/15/2014
Before I ordered any grease from anyone... I checked around on-line for information on what I should be looking for, as far as specifications and usage. Then I checked to see what etrailer. had. I've ordered from etrailer several times before and been very satisfied with the products and the service. This product more than met the requirements I wanted, and I learned from my very first order, the people at etrailer are paying attention! I can't see what this stuff is actually doing... so, I have to believe in who is selling it.
by:
Len
04/26/2017
Order arrived very quickly. Placed on Friday, arrived on Tuesday from Mo to Pa. Items were packed well and arrived in good condition. Upon initial inspection all items appear of good quality. Ordered tires, brakes with backing plates, hubs ,seals and grease. Haven't installed any items yet, but I am sure I will have no issues. Free shipping is a plus. Additionally unlike other free shipping offers that are out on the back burner for a week, order was processed and shipped promptly. I have recommended etrailer to friends and would highly recommend them to anyone.
by:
Eric
04/14/2020
All the products I purchase from etrailer (most recently trailer bearing grease and five pin trailer plugs) are always high quality and do the job they are designed to do. The prices are reasonable also.
by:
DaveW
08/20/2020
Love it. Use it for wheel bearings.
Dave W.
8/23/2021
Great Product. No Problems.
by:
Keith A.
08/12/2012
purchased. Having never done this before, I had no idea how much I needed to do all of the EZ-Lube wheel bearings. I bought one tube and this got me through two wheels. I ended up ordering two more tubes that I'm now waiting on.
I think half a tube per EZ-Lube wheel. So two tubes for a trailer with four wheels. I ordered an extra tube to make sure.
I think half a tube per EZ-Lube wheel. So two tubes for a trailer with four wheels. I ordered an extra tube to make sure.
by:
Ray t
08/08/2017
Had ordered brakes for my travel trailer and in a few days I got them. No problems with the packaging and I got free shipping. Service was excellent and I would highly reccomend etrailer for parts. I would definitely buy from them again.
by:
Bill
10/17/2014
Have problem with new wheel bearing. I checked both on the spindle before installing in the hub/drum. One was OK the second would not go. Saved if you would need to see it. The rest of the installation went well. Good delivery time
by:
Leroy
12/29/2019
Bought this product to use for greasing the wheel bearings on my Grand Design 5th wheel. Product had good reviews. To soon to evaluate. Will respond as I get some miles on the product.
by:
Anthony
07/21/2023
Great "tacky" wheel bearing grease...holds on bearings well.....5-stars!
by:
Charles G.
07/21/2017
Great product and very "sticky" which is exactly what I want for hard use applications. I originally bought this to repack wheel bearings but was so impressed with it that I now keep it in my grease gun to lubricate my farm equipment.
by:
Gary G
09/15/2017
We recently placed an order for several items. However, an issue arose with an out of stock item. Ensuring that the order would not be delayed, the etrailer team substituted a comparable product. This makes for great customer service. Sometimes the test of a company is how they respond to issues that arise. All of the staff that we have dealt with have provided excellent service. They definitely get five stars from us.
by:
Carole
07/07/2020
Worked as designed. Easy way to install new dust caps and minimize damage to cap when installing. Used wood for years ...... but this is way easier to store in your tool box.
by:
Robert
05/15/2018
Nothing bad to say about product. I use it specifically for greasing our travel trailer bearings.
by:
Bruce
04/25/2018
This is the wheel bearing grease recommended by pop up camper maker. The grease tube fit my grease gun perfectly making my grease job very easy and neat.
by:
Dan T
04/11/2017
Good, high quality grease for my trailer hubs.
by:
shawn d
04/06/2015
A must have for disk brake users. Other grease types leak out the seals where this stuff stays put
by:
Roger M
03/24/2017
Great product and quick shipping
by:
Darrin
08/04/2025
Quick shipping. Everything was a perfect fit.
by:
Thomas
10/15/2019
THIS GREASE IS SUPPOSE TO BE VERY GOOD. DOWNSIDE IS AVAILABILITY. BEING A POLYUREA CONVENTIONAL TYPE GREASE IT NOT COMPATIBLE WITH THE MORE AVAILABLE GREASE AT AUTO PART STORES, SO YOU BETTER KEEP A CARTRIDGE IN YOUR BACK POCKET AT ALL TIMES. BUYING FROM E-TRAILER IS A PLEASURE.
by:
Ken S
08/31/2018
This grease has worked very well for my salt water boat trailer for many years.
Quick on time delivery. The staff is very helpful and knowledgeable .
Quick on time delivery. The staff is very helpful and knowledgeable .
by:
Doug
05/24/2022
Best lube for all my undercarriage needs.
25
102
true
Show More Reviews
See what our Experts say about this LubriMatic Lubricants Sealants Adhesives
- Pre-Greased Replacement 5-on-5 Hub for 3500-lb Dexter AxleYou can confirm the weight rating of your Dexter axle by removing one hub and pulling its bearings. The included photo shows how part numbers usually appear on bearings. The specific bearings used will tell you the axle's weight rating. Just refer to the linked article that lists the bearings commonly used for various axle weight ratings. A new hub must use the same bearings as the original hub in order to fit on your spindles. A 3500-lb axle commonly uses bearings # L68149 and # L44649...
view full answer...
- Oil Bath or Grease for HydraStar Disc Brake Kit with Actuator for Tandem Axle TrailersIn regards to the bearings, trailer bearings nowadays are generally made overseas; there may be some exceptions here and there, but they generally aren't standard trailer bearings. The bearings and seals that come with the HydraStar Disc Brake Kit with Actuator for Tandem Axle Trailers # HSE7K-T1 are of the highest quality and you won't have any issues. As far as changing from grease to oil bath, that is not recommended for trailer hubs. Oil bath hubs can be problematic because they are...
view full answer... - Grease Fitting Locations for Curt A20 Fifth Wheel HitchThe zerk fittings for the Curt A20 hitch part # C16140 are located on the front of each jaw.The jaws must be in the closed and locked position for the zerks to be accessible. They are kind of hard to see but I attached a picture that points them out. Curt recommends high pressure grease like the part # L11465. If you need a grease gun we have part # L30200.
view full answer...
- Looking For Replacement Trailer Hubs For 5 on 4-1/2" Lug Pattern With LM11949 Bearing And LM11910 RaHey Jason, LM11949 is a bearing that works with LM11910 race, and we do have idler hubs that match these specs while also fitting your 5 on 4-1/2 lug pattern. That said, you'll also want to check the inner bearing to verify that it is LM67048 (1.25" inner diameter). If it is, then Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 # DX22XR is the correct idler hub. Keep in mind, these are not pre-greased so you will have to do that when they arrive. It is not hard to do...
view full answer... - Recommended Trailer Wheel Bearing Grease for Dexter AxlesUsually when you replace parts that get lubricated, you clean all of the existing grease first before adding any new grease, just in case there is a compatibility issue. Since you are using Dexter axles and replacing components with Dexter parts, the grease will be compatible. For wheel bearing grease, use # L11465, or # L11380. This is a polyurea-based grease that is compatible with most grease formulas of the same or similar chemical makeup. Take a look at our grease help article, linked...
view full answer... - What is the Best Grease for Trailer BearingsEven though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high temperatures (like what occur on a trailer hub that has massive RPMs when travelling, even at slower speeds) so it will continue to lubricate instead of quickly dissipating like you see with lower rated greases. The best grease for trailer bearings...
view full answer... - Is LubriMatic Marine Grease Compatible With LubriMatic 11465Hey Malcolm, The LubriMatic Marine Trailer Wheel Bearing Grease # L54FR isn't going to be compatible with the 11465 grease you were using. That said, I do have some good news as that grease is in fact still made and available. What you need is the LubriPlate Poly HP-2 Wheel Bearing Grease # L11465.
view full answer... - Where are Grease Fittings on Curt A20 Fifth Wheel Hitch I can help you with info on greasing the A20 hitch but we don't have a video to share at this time. The zerk fittings for the Curt A20 hitch part # C16140 are located on the front of each jaw.The jaws must be in the closed and locked position for the zerks to be accessible. They are kind of hard to see but I attached a picture that points them out. Curt recommends high pressure grease like the part # L11465. If you need a grease gun we have part # L30200.
view full answer...
- Do Hubs have to be Removed to Add Grease to Bearings on an EZ Lube Trailer AxleNo, you do not have to remove the hubs on an EZ Lube axle and hubs to pack the bearings with grease. You would use the grease zerk fittings at the ends of each spindle to add grease using a grease gun such as # L30200. The trick is to use new grease that is compatible with the old grease. Some greases are not compatible and will cause each other to break down which can lead to over heating and damage to the bearings, spindle, and hubs. A bearing grease such as # L11465 is formulated...
view full answer... - Will LubriPlate Poly HP-2 Work with Grease in Hub CurrentlyHey Stewart, the LubriPlate Poly part # L11465 that you referenced is a universal enough blend that it's going to work with what you have now in your hubs and you wouldn't have to worry about compatibility.
view full answer... - Bearing Grease Compatible With Polyurea BaseHey Bruce! The LubriPlate Poly HP-2 Wheel Bearing Grease # L11465 you looked at will work well and is compatible. This also uses a polyurea base so it won't be an issue. Polyurea is a little more limited as far as compatibility goes but it can be used with itself (of course) along with calcium complex. If you need anything else let me know.
view full answer... - Replacement Spindle and Hub For 3/4 Straight SpindleI recommend updating your axle spindles to the the BTR E-Z Lube Spindle # TRU44FR as we do not have hubs that fit a 3/4" spindle. This is the more common 1-1/16" diameter spindle and will allow you to use the Easy Grease Trailer Idler Hub Assembly # AKIHUB-440-2-EZ-2K. This hub is a 4 on 4" bolt pattern and with the spindle above will allow you to fill your hubs with Grease # L11465 using a Grease Gun # L30416 through the rubber cap on the grease cap.
view full answer... - Which Grease for Curt C17499 TruTrack Weight Distribution SystemA quality wheel bearing grease like # L11465 or the bearing grease you're already using would work just fine. You'll want to grease the trunnions by using the grease zerk and also brush some grease on the ball bearings above the trunnion as shown in the provided diagram.
view full answer...
- What is the Replacement Wheel Hub Needed on the Axle of a 1996 Jayco 1207 Popup TrailerWe have a hub that will fit your 1996 Jayco popup trailer. The Dexter Trailer Hub assembly, # 8-91-05UC1-EZ, that you referenced will work on your trailer axle. This hub uses the # L44649 bearings and has a 4 bolt lugs. Measuring the current hubs bolt pattern will tell you for sure if this hub will work for you. I have attached an article that will explain how to find what your wheel bolt pattern is on your current hub. If you do not have grease zerks at the end your axle spindles, then...
view full answer... - Bearings, Seal, Grease Cap, & Grease For Malone MicroSport TrailerWe do indeed have the correct replacement bearings, grease seal, grease cap, and grease for your Malone MicroSport Trailer # MPG460G. What you will need is the following: - Bearing Kit # BK1-100 - Grease Cap # F001518 - LubriPlate Poly HP-2 Wheel Bearing Grease # L11465 The bearing kit comes with the correct bearings, races, and seal for one hub on your MicroSport trailer. Then for a grease gun and bearing packer use the LubriMatic Grease Gun # L30200 and Bearing Packer # ALL647646.
view full answer... - What Grease Should Be Used In Trailer Hub When Current Grease Complex Is UnknownThat will really depend on the bearing grease used in the hubs of your Detail K2 Mighty Multi A-Frame Utility Trailer # K2MMT5X7. Typically manufacturer's of utility trailers use a standard grease like the # L11465 or # L11380 you saw mentioned, but this grease is only compatible with polyurea based conventional greases. What I recommend instead is since DK2 is unable to provide the complex of the factory grease, Remove the hubs and clean out all of the factory grease. Once that is done...
view full answer... - Recommended Hub Components For Dexter 4,300-Lb Axle On 2013 Airstream TrailerI found the components you need for your Dexter axle on your Airstream trailer. The grease seal you need is part # RG06-070. The inner bearing is part # 25580. The inner race is part # 25520. The outer bearing is part # LM67048, and the outer race is part # LM67010. I have also attached a helpful article that explains how to replace hub components. To make the job of packing the wheel bearing much easier I recommend a bearing packer like part # L70025. For grease I recommend part #...
view full answer... - How to Identify What Wheel Bearings and Grease Seals are Needed on Trailer AxlesPulling the wheels and hubs off of your 5th wheel trailer is the best option when trying to identify what wheel bearings and seals are installed. On the back of the wheel bearings there usually is printed a part number like # L44643. With these numbers you will be able to identify the correct wheel bearings on your trailer's axle. Using the attached FAQ article, match the bearing numbers and you will be able to find the correct bearing & seal kit for your trailer. In some instances...
view full answer...
- Replacement Hub Options For a Spindle With 1-1/4 Inner Bearing and 7/8 Outer BearingI have a recommendation as we do not have any hubs that will use the bearing combination you have. I recommend replacing your spindles with the BTR E-Z Lube Spindle # TRU27FR. This will upgrade you to a more commonly found spindle size that use the same Inner and Outer Bearing # L44649. You will be able to use the Easy Grease Trailer Idler Hub Assembly # AKIHUB-440-2-EZ-2K. Since the spindle and hub are easy lube you will be able to fill the hub with Grease # L11465 and a Grease Gun # L30416....
view full answer... - Needing Bearing and Seal Replacement for Lippert AxleI found a bearing and seals that will fit your Lippert Axles. According to the manufacturer on the 5,200 lbs axles, the outer bearing number is # LM67048, the inner bearing is # 25580 and the grease seal will be 10-36, # RG06-070. Now, before you order your parts, you will need to remove the wheel and hubs to inspect the bearings to see if the bearing numbers are match to the ones listed above. If they match then you will need # BK3-300. This is a bearing kit that will include both inner...
view full answer...
- What is Needed to Re-Pack Trailer Bearings With EZ-Lube or Posi-Lube AxleWith an EZ-Lube or Posi-Lube axle, you do not have to take apart the hubs to re-pack the bearings. You are absolutely correct that all you need to do is use the grease zerk and add LubriMatic LMX Industrial Strength Grease # L11390 or LubriMatic Wheel Bearing Grease # L11465 with Grease Gun # L30200, # L30416, or # L30480. That said, it is still a good idea to disassemble the hub and manually inspect the bearings on occasion just to be sure everything is in good working order. I have...
view full answer... - Bearing Kit for Snowmobile Trailer with L44649 Inner and Outer BearingsIt sounds like the bearing you pulled is actually an L44649 which is the inner and outer for 84 spindles which are straight spindles. These are usually found on lower capacity trailers so it makes sense on a snowmobile trailer. For a bearing kit I recommend # BK1-150 because it comes with both bearings, a seal, cotter pin, and EZ lube spindle washer. You may not need all of the parts but you never know! Since packing bearings on the side of the road would totally suck, why not make it...
view full answer... - What Synthetic Wheel Grease do You Recommend for My Travel Trailer Wheels? For your 2020 Jayco travel trailer's wheels with zerk fittings, I recommend the LubriMatic Wheel Bearing Grease for Disc and Drum Brake Applications # L11465 along with the grease gun # L30200. This grease is fully synthetic and is perfect for wheel components.
view full answer... - Spindle and Hub Combination to Fit 4.80 X 12 Tires and Wheels on a BBQ Grill BuildWhen manufacturing axles for a wagon/trailer you will need to measure the inside of the square tube that you will be using for the axle. Once you know this measurement then you can pick the correct spindles and idler hubs. One spindle that would work well for your build would be TruRyde 1-1/2 Inch Square BT8 Spindle # TRU97FR. This spindle has a square mount shank that will fit an 1-1/2 square tube. This spindle will have to be welded to the axle. It is recommend that this be done by a...
view full answer...
Do you have a question about this Lubricants Sealants Adhesive?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Jacob T
Video by:
Dustin K
Installed by:
Cole B
Installed by:
David F
Installed by:
Michael B
Updated by:
Wilson B
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Matt W.
1/27/2015
Still working fine. Holds up the way I expect.