LubriMatic Moly EP Grease - 14-oz Cartridge

See what our Experts say about this LubriMatic Lubricants Sealants Adhesives

• Moly Grease to Use with Curt Rockerball
  We do carry Moly grease like with the LubriMatic Moly EP grease part # LM54FR which would work great with the Curt Rockerballs like the part # C40047 that you referenced.
  view full answer...
• Grease & Zerk Size For Blue Ox SwayPro
  The SwayPro uses standard 1/4" grease zerks; for grease and a grease gun use LubriMatic Moly EP Grease # LM54FR and Grease Gun # L30200.
  view full answer...
• Can LubriMatic Moly EP Grease be Used in Wheel Bearings of Jet Ski Trailer
  Yes, you can use the Lubrimatic Moly Grease part # LM54FR in the wheel bearings of your jet ski trailer.
  view full answer...
• Does 1,000 lb Blue Ox SwayPro Weight Distribution Need to be Greased
  Thank you for your purchase from etrailer of the SwayPro, and yes, per the directions you do need to grease the Blue Ox SwayPro Weight Distribution w/ Sway Control - Clamp On - 10,000 lbs GTW, 1,000 lbs TW # BLU66FR. As you can see by the cut out of the directions that I added, you do need to grease the zerk on the head assembly where the spring bars meet before each trip, as well as the hitch ball. For the grease and pump you will need the LubriMatic Moly EP Grease # LM54FR and Grease...
  view full answer...
  
• Switching from Standard Equalizers to Road Armor Kit and Recommended Shackles + Bushings
  You will be able to use the Road Armor Shock Absorbing Equalizers since they're fairly close in dimensions (6" wide x 3-1/4"). I recommend pairing these equalizers with the Never Fail Tandem Axle Suspension Kit # LC281285 which comes with 2 different lengths of shackle straps (3-1/2" and 4-3/8" bolt hole to bolt hole) to accommodate for the change in height, new bolts and bushings for your springs. One of the great things about this kit, aside from it being high quality and durable, is...
  view full answer...
  
• Correct Grease for Blue Ox Sway Pro Weight Distribution
  Yes, the UltraLube Biobased Moly EP Grease part # LM54FR is a molybdenum based grease so it will work with the Blue Ox Sway Pro Weight Distribution Systems like part # BXW1500.
  view full answer...
• Correct Grease for Blue Ox Sway Pro Weight Distribution System
  We do carry the correct grease for the Blue Ox Sway Pro Weight Distribution System, the LubriMatic Moly EP Grease part # LM54FR. That said, it's only available in a 14 oz tube unfortunately. If you decide this will work we do carry grease guns for this size tube, the LubriMatic Ultimate Grease Gun part # L30480.
  view full answer...
• UltraLube Biobased Moly EP Grease L10314 General Info
  The LubriMatic Moly EP Grease # LM54FR that you referenced is biobased with lithium thickener, molybdenum and an EP additive. Contains molybdenum disulfide to reduce friction and increase lubricity. Other useful info: NLGI #2 LB Drop point: 387 F Drop-point values for UltraLube biobased products are slightly lower than the values of corresponding petroleum-based products. However, the reduced operating temperatures of biobased products compensate for the difference. If you need further...
  view full answer...
• Recommended Grease for Blue Ox SwayPro System, Different Types of Grease
  You are correct that in the Blue Ox SwayPro Owner's Manual they do recommend use molybdenum grease on both the hitch ball and the spring bars. The LubriMatic Moly EP Grease # LM54FR in a grease gun, such as # L30480, will work well. You could use the Reese White Grease Hitch Ball Lube # 58117 on the hitch ball of your SwayPro system if you choose not to use the molybdenum grease. However you would not want to use the hitch ball grease at the zerk fittings of the SwayPro spring bars. The...
  view full answer...
• Moly EP Grease Recommendation for Sway Bars
  The part # LM54FR that you referenced would work well for you. This grease contains molybdenum disulfide (often refered to as "moly") for better performance than general-purpose grease when metal parts are under high loads or extreme pressure (hence the name "EP"). It's intended to be used on parts where sliding motions are encountered. This grease is used to lubricate car chassis parts such as ball joints and U-joints, as well as farm equipment and industrial machinery.
  view full answer...
• Grease Recommendation for Blue Ox Sway Pro Weight Distribution
  You are correct that the Blue Ox SwayPro weight distribution systems do require the use of molybdenum grease. For that you would want the part # LM54FR. If you need a grease gun for that you would also need the part # L30200.
  view full answer...
• Can You Use Industrial Strength Red Grease In The Dexter HD Suspension Kit # K71-358-00?
  Yes, you can use a Lithium Complex grease like Lucas Oil's Red and Tacky or Lubrimatic's LMX Industrial Strength Red Grease, # L11390 in these shackles. These Lithium Complex grease products resist water and stay in place, which means they work well on external parts that are exposed to the weather. Lithium Complex grease works well with trailers that are heavily loaded as well as industrial or agricultural trailers that get a lot of use. If your trailer is not used for industrial or...
  view full answer...
• What Grease Is Needed To Lubricate The Curt RockerBall?
  The Curt RockerBall # C40047 requires a Molybdenum-based Grease # LM54FR. It is not acceptable to use the LubriMatic LMX Industrial Strength Grease # L11390. This information is found in the instructions linked below.
  view full answer...
• What Type of Grease Needs to be Use with Curt Rockerball
  Hey Andrew, Curt is pretty adamant that you have to use a Moly blend grease with the Rockerballs like with the part # LM54FR so that would be what we would have to recommend you stick with.
  view full answer...
• Recommended Grease for the Blue Ox Sway Pro System
  Blue Ox recommends LubriMatic Moly EP Grease for the Blue Ox Sway Pro System. For that you would want the part # LM54FR. If you need a grease gun for that you would also need the part # L30200. I have linked both parts mentioned above to this page for your convenience.
  view full answer...
  
• Will Lucas Oil Marine Grease Work with Curt RockerBall Shock Absorbing 2" Hitch Ball
  The Curt RockerBall Shock Absorbing 2" Hitch Ball part # C40047 per the instructions requires a high-quality molybdenum-based grease. In other words, any grease with a moly base will work. I recommend the LubriMatic Moly EP Grease part # LM54FR. It looks like the Lucas Oil Marine Grease has a calcium sulfonate base so I cannot recommend this.
  view full answer...
• Grease Recommendation for Suspension Components
  A Moly EP grease like part # LM54FR would work well for greasing the suspension components of your trailer. For a grease gun to use the wet bolts and get grease into the # trbu11566 with the wet bolts you would want the # L30200. As long as the wet bolt that you are intending to use is the appropriate size, wet bolts can be used on the fixed side of leaf springs.
  view full answer...
• Troubleshooting Lippert Electric Trailer Jack Not Moving with Electric or Manual Operation
  Since you are getting power to your Lippert Electric Trailer Jack # LC285318 for the lights and you hear the relay click when attempting to raise or lower it using the motor and switch, it sounds like there is a mechanical issue. Also the fact that you can't move it with the manual crank tells me there is an issue with the threaded rod and nut inside and not with the motor or electrical components. I recommend using some penetrating oil to try and loosen that binding so your jack can...
  view full answer...
• Molybdenum Disulfide Grease for Ultra-Fab Landing Gear
  We do have some grease with molybdenum disulfide such as LubriMatic Moly EP Grease # LM54FR that you can use with your Ultra-Fab landing gear # UF17-943010. I have linked a video review of this grease for you. Current pricing is available on the product page.
  view full answer...
• Is The Red "N" Tacky Grease From Lucas Okay to Use on Travel Trailer Wet Bolts?
  Yes, your Red "N" Tacky grease is okay to use for the wet bolts on your travel trailer. Do note this is an EP grease like the LubriMatic # LM54FR and should not be mixed with other types of grease. If there is another grease on your wet bolts already and you are unsure you will want to remove the bolts and clean out the grease before adding the new grease.
  view full answer...
  
• 1969 Jeep Doesnt Stay Straight When Flat-Towing
  There are a few things that could be causing your 1969 Jeep to not follow straight behind your tow vehicle using a tow bar like the Roadmaster # RM-501. 1. Double check your ball mount and ensure there isn't any movement. If there is movement, you can use a Roadmaster Quiet Hitch # RM-061 because it will help with rattling and shifting in your receiver hitch. 2. Take a look at your coupler and properly lube it with lithium grease # LM54FR. Make sure you clean off any and all existing...
  view full answer...

Do you have a question about this Lubricants Sealants Adhesive?