bing tracking image
Customer Service My Orders
Q & A Icon

Needing Bearing and Seal Replacement for Lippert Axle  

Updated 02/14/2017 | Published 02/12/2017

Question:

HELP plz!! I cant figure this out. I need replacement bearings and seals for Lipperts 5200 lb axle P# - LCI52-SB-92.5-74.5-NOSP-US-L-65516-7225-18PT. I cant figure it out on their site. See attached picture of the info tag. I could also use brake liners as well while you are at it! THANKS!

0

Expert Reply:

I found a bearing and seals that will fit your Lippert Axles. According to the manufacturer on the 5,200 lbs axles, the outer bearing number is # LM67048, the inner bearing is # 25580 and the grease seal will be 10-36, # RG06-070.

Now, before you order your parts, you will need to remove the wheel and hubs to inspect the bearings to see if the bearing numbers are match to the ones listed above. If they match then you will need # BK3-300. This is a bearing kit that will include both inner and outer bearings, a grease seal and new cotter pin. The kit is will be for one wheel, so you will need two kits per axle. I also recommend # L11465 wheel bearing grease and # L70025 bearing grease packer.

If your bearings numbers do not match or there are no numbers on the bearing, then you will have to measure the spindle bearing seats to get the correct bearing size. I have included an article on wheel bearings for your to review and a photo that will show what measurements are needed on the spindle so you can find the correct bearings.

expert reply by:
0
Jared P
click to enlarge
click to enlarge
Ask The Experts a Question >>

Product Page this Question was Asked From


Featured Help Information

Miscellaneous Media

wheelbearingpack
Replacing the Bearing, Races and Seals on a Trailer Hub
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>