Will LubriPlate Poly HP-2 Work with Grease in Hub Currently
Updated 10/30/2025 | Published 02/20/2025
Question:
I just want to get a 1 oz tube of this grease a use my grease gun on the zerk fitting to displace the old grease. I read on your site that some greases are incompatible. How can I know if this will be a problem? I would rather not have to take the whole assembly apart to remove all of the old grease.
asked by: Stewart
0
Expert Reply:
Hey Stewart, the LubriPlate Poly part # L11465 that you referenced is a universal enough blend that it's going to work with what you have now in your hubs and you wouldn't have to worry about compatibility.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
LubriPlate Poly HP-2 Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Petroleum-Based
- Standard Bearing Grease
- Polyurea - Conventional
- 14 oz
- LubriMatic
more information >
Continue Researching
- Shop: LubriPlate Poly HP-2 Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge
- Q&A: What is the Best Grease for Trailer Bearings
- Q&A: How to Determine What Bearing Buddy Will Fit a Hub
- Q&A: Parts Needed to Add Air Compressor To Air Lift 5000 Air Bags With Braided Lines
- Q&A: Recommended Trailer Wheel Bearing Grease for Dexter Axles
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Overview of Lubricating Grease
- Q&A: Recommended Center Cap For Goodyear Endurance Tire On Eagle Aluminum Wheel GY37QB
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Q&A: Recommendations to Prevent Rust on Disc Brakes for Boat Trailer
- Article: Most Popular Wheel Bearings
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Article: How to Tell the Weight Rating of a Trailer Axle
Jameson C.
10/30/2025
Hey Stewart, how did things go using the LubriPlate Poly grease in your hubs? It’d be great to hear if it blended smoothly with the old grease. Your update could make it easier for others with the same concern.