Replacement Spindle and Hub For 3/4 Straight Spindle
Updated 08/11/2022 | Published 08/09/2022
Products Featured in This Question
Question:
Do you have any trailer hubs 4 on 4 with 3/4 spindle.
asked by: Jack S
0
Expert Reply:
I recommend updating your axle spindles to the the BTR E-Z Lube Spindle # TRU44FR as we do not have hubs that fit a 3/4" spindle. This is the more common 1-1/16" diameter spindle and will allow you to use the Easy Grease Trailer Idler Hub Assembly # AKIHUB-440-2-EZ-2K. This hub is a 4 on 4" bolt pattern and with the spindle above will allow you to fill your hubs with Grease # L11465 using a Grease Gun # L30416 through the rubber cap on the grease cap.
expert reply by:
Bud M
0
Product Page this Question was Asked From
BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- Without Flange
- L44649
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Continue Researching
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Q&A: What Are Dimensions Of The BTR E-Z Lube Spindle for 2,000-lb Trailer Axles TRU44FR?
- Q&A: Replacement Hub and Bearings for 1989 Tracker Boat Trailer
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Replacement Trailer Hub for the TDE 46205 with Galvanized Finish
- Q&A: How Much Grease is Needed in an EZ Lube Axle
- Q&A: Replacement Hub and Spindle for Dexter 69-46 Axle
- Q&A: Replacement Hub Assembly for Older Boat Trailer with 4 Bolt Pattern
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Most Popular Wheel Bearings
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Lighting Requirements