What is the Replacement Wheel Hub Needed on the Axle of a 1996 Jayco 1207 Popup Trailer
Updated 06/03/2017 | Published 06/01/2017
Products Featured in This Question
Question:
I have a 1996 Jayco 1207 pop up camper and I have a cracked hub but Im not sure which hub I need to replace it, its a 4 bolt hub. Bearings are part #L44649 . Any input would be greatly appreciated
asked by: Sam G
Helpful Expert Reply:
We have a hub that will fit your 1996 Jayco popup trailer. The Dexter Trailer Hub assembly, # 8-91-05UC1-EZ, that you referenced will work on your trailer axle.
This hub uses the # L44649 bearings and has a 4 bolt lugs. Measuring the current hubs bolt pattern will tell you for sure if this hub will work for you. I have attached an article that will explain how to find what your wheel bolt pattern is on your current hub.
If you do not have grease zerks at the end your axle spindles, then use the hub # 8-91-05UC1. This hub will also fit, but will include the typical one piece dust cap.
I also recommend using Wheel Bearing Grease, # L11465, a grease gun( if you do not already have one) # L30200, and the LubriMatic Deluxe Bearing Packer, # L70025 when getting ready to install the hub on your trailer.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - L44649 Bearings
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings
- Search Results: trailer hubs and drums
- Search Results: 8~91a
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - L44649 Bearings
- Shop: Lippert Trailer Idler Hub Assembly for 2,200-lb Axles - 4 on 4" - Pre-Greased
- Shop: Trailer Idler Axle Beam with Easy Grease Spindles - 60" Long - 2,000 lbs
- Shop: Lippert Trailer Idler Hub Kit for 2,200-lb Axles - 13" to 15" Wheels - 5 on 4-1/2"
- Q&A: Replacement Dexter Hub for 8-91A Hub
- Q&A: When Installing Hubs On An Axle Should They Spin Freely Or Should There Be Some Resistance?
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Video: Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles Feature Review
- Q&A: Needing Dexter Hub # 8-91A
- Search Results: jayco
- Video: Review of Dexter Trailer Hubs and Drums - Pregreased Idler Hub - 8-259-5UC1-EZ
- Q&A: Correct Replacement Brakes and Hub/Drum Assembly for '97 Jayco Popup
- Q&A: Replacement Axle, Hubs and Wheels for 1997 Jayco Pop-Up Camper 8SD
- Video: Dexter Trailer Hub and Drum Assembly for Hydraulic Brakes Spec Review
- Q&A: How To Determine Axle Capacity of Trailer with 4 Lug Hubs with Brakes
- Search Results: ventline northern breeze
- Video: Pop-Up Camper Catch Review
- Video: All About the Lippert Replacement Threshold for RV Entry Door
- Q&A: Parts Needed to Change Hydraulic Trailer Brakes Over to Electric Brakes on a 1997 Jayco Tent Trailer
- Search Results: 4x4 hub