1. Camper Jacks
  2. etrailer
  3. Stabilizer Jack
  4. Drop Leg Jack
  5. Swing Down Jack
  6. 650 lbs
Stabilizer Jack - 6-1/4" Drop Leg Travel - 18" - 650 lbs - Qty 1

Stabilizer Jack - 6-1/4" Drop Leg Travel - 18" - 650 lbs - Qty 1

Item # TJ01RT
lowest price pledge
Our Price: $35.22
Camper Jacks
Orders above $99 qualify for Free Shipping
Shipping Weight: 4 lbs
Quantity: 
In Stock
TJ01RT - 650 lbs etrailer Camper Jacks
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Heavy-duty jack stabilizes your lightweight cargo or camper trailer. Leg telescopes to the ground when you release the lever. Jack swings up for storage. Black powder coat finish resists corrosion. Handle (SJ-100-HD) sold separately. Call 800-298-8924 to order etrailer camper jacks part number TJ01RT or order online at etrailer.com. Free expert support on all etrailer products. Guaranteed Lowest Price and Fastest Shipping for Stabilizer Jack - 6-1/4" Drop Leg Travel - 18" - 650 lbs - Qty 1. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (540)
  • Q & A (22)
  • Photos
  • Why etrailer?

etrailer Camper Jacks - TJ01RT

  • Stabilizer Jack
  • Drop Leg Jack
  • Swing Down Jack
  • 650 lbs
  • Bolt-On
  • Weld-On
  • etrailer

Heavy-duty jack stabilizes your lightweight cargo or camper trailer. Leg telescopes to the ground when you release the lever. Jack swings up for storage. Black powder coat finish resists corrosion. Handle (SJ-100-HD) sold separately.


Features:

  • Stabilizing jack helps keep your trailer or camper level and steady
    • Great for loading and unloading cargo or for camping
  • Folding design lets you flip jack up for travel, down for use
  • Drop leg extends so you can adjust the height
    • Spring-loaded lever releases drop leg for use
    • Steel handle (SJ-100-HD - sold separately) lets you easily fine-tune height adjustment
  • Large foot provides stability
  • Sturdy steel construction
  • Black powder coat finish resists corrosion
  • Bolt-on or weld-on installation
    • Mounting hardware not included


Specs:

  • Bracket height:
    • Retracted 11-1/2"
    • Extended: 18"
  • Drop leg travel: 6-1/2"
  • Lift capacity: 650 lbs
    • Maximum load the jack can lift
  • Support capacity: 1,000 lbs
    • Maximum vertical load the jack can support
  • Mounting plate dimensions: 4" long x 1-7/8" wide
    • 3" From center of hole to center of hole
    • 7/16" Diameter holes
  • Footplate dimensions: 4" long x 3-1/2" wide
  • Quantity: 1 jack
  • 1-Year warranty


Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use this jack to lift your trailer or RV. Doing so will exceed the capacity of the jack.


This stabilizer jack is handy for leveling or stabilizing lightweight trailers. Support the front of your cargo trailer so you can load it or unload it without the trailer rocking or tipping. Or level your pop-up for a night at the campground.



SJ-100-NH Stabilizer Jack - 650 lbs

Replaces 82300






Customer Reviews

Stabilizer Jack - 6-1/4" Drop Leg Travel - 18" - 650 lbs - Qty 1 - TJ01RT

Average Customer Rating:  4.8 out of 5 stars   (540 Customer Reviews)

Heavy-duty jack stabilizes your lightweight cargo or camper trailer. Leg telescopes to the ground when you release the lever. Jack swings up for storage. Black powder coat finish resists corrosion. Handle (SJ-100-HD) sold separately.

- TJ01RT
by:

The stabilizer is about what I expected , operates smoothly and the locking mechanism works well . The paint coating leaves something to be desired . Item was scratched up on arrival and scratched easily during installation , I repainted the stabilizer and hope rust does not become an issue 92738


Comments
The paint used on the stabilizers is not very durableAfter less than 1 year the stabilizers are badly rustedThe original stabilizers on the rear of my trailer. Atwood are 3 years old and show no signs of rust
Steven S - 01/30/2015

9127

- TJ01RT
by:

Just like the picture. Works great on the tung of my motorcycle tag-a-long trailer. Now I don't have to use a board or something to prop it up. Welded it on for a permeate fit. Shipping was quick. 204131


Comments
One yr latter and its still doing a great job. I used some body filler and black paint looks like the jack was made on the trailer. very happy with the way it turned out.John L
John L - 06/21/2016

18856

- TJ01RT
by:

Perfect for what I needed at a fraction of the price from other places. Very easy to install. Will recommend to anyone who needs something like this. Thank you 640164


Comments
A year later and still holding strong
Bill W - 05/10/2020

76098

- TJ01RT
by:

I received these 3 cool stabilizing jacks a couple of days ago and installed them today. I am impressed with the leveling jacks and they are just what the doctor ordered for this trailer. This 4’X8’ trailer was built in 1975 and has a ’66 Olds Tornado rear axle. I mounted 1 jack on the tongue and 2 jacks on the rear for stability and so I don’t have to be hooked up to load the trailer. They will work great. I will attach several pictures and use what you wish. Great communication on this purchase and fast shipping on the items and quite reasonable. I will purchase from etrailer again. 62348


Comments
The leveling jacks are still working just as good as they did the day they were new. Ideal support jack for small trailers. etrailer good people to do business with.
James S - 07/03/2014

5303

- TJ01RT
by:

I had asked for the order asap and you did just that. It even arrived a day sooner than you stated. It was just what I was looking for. It fits perfect with the frame I have and the same color! See attach. pic. When I picked up this trailer it needed a full make over, now look at it...nice! Thank you so much, Terry 142236


Comments
Still working great, I love it.
Terry H - 07/19/2015

13453

- TJ01RT
by:

I purchased this load stabilizer for my light duty trailer so the hitch wouldn't have to lay on the concrete when nor hitched to my tractor. The quality was great and it functioned as advertised. Great product I would recommend this to a friend. 80299


Comments
How did you mount your stabilizer? In the pictures you put on e-trailer.com of your application, I cant see any bolt holes in the trailer tongue, but it appears you installed the stabilizer on a plate of some sort mounted underneath the trailer.
-- comment by: Blane K - 10/06/2014

7162
Comments
I cut 2 pieces of 1/4 inch thick aluminum plate one to fit inside the trailor tongue and the other one to fit between the trailor tongue and the mounting bracket on top of the load stabilizer. I machined a shoulder on the bottom face of the aluminum plate inside the trailor tongue and I also machined another shoulder on the top face of the aluminum plate between the stabilizer and the trailor tongue. I also transferred the two holes on the top of the load stabilizer to the aluminum plates and drilled through holes to match that size in both plates. Now to mount you put the one plate inside the tongue with the shoulder facing down lined up with the gap in the underside of the tongue the other plate goes on top of the load stabilizer with the sholder faceing up to also line up with gap in the underside of the tongue now put 2 bolts through the holes in the load stabilizer mounting bracket faceing up through both aluminum plates and install lock washers and nuts then tighten down after sliding the stabilizer forward or backward to your desired location. The reason for the shoulders is so the whole unit wont twist when mounted. Also the shoulder thickness of both plates added together cant be thicker than the thickness of the tongue material or the mount wont tighten up enough to prevent it from sliding back and forth on the tongue. I hope this helps. This system works without having to drill any holes th the trailor tongue and also looks good and clean mounted.
-- comment by: Charles B - 10/09/2014

7221

- TJ01RT
by:

These are the cats @$$,they work great & easy to install ! 886892



- TJ01RT
by:

Measurements provided on website were precise. Perfect fit for my needs. Easy to install 882265



- TJ01RT
by:

Very nice and easy to attach. When in travel position the foot latch for the extension has to be moved to allow it to lock in up position. Otherwise the latch mechanism hits the trailer frame just enough to not allow the leg to slide all the way into the detent when up. It just requires that when I raise up for travel, that I push the latch plate to allow the leg to slide and fully engage. It functions fine when in lowered position. Kind of thought it came with the bar shown to adjust, I had a bar so not a deal breaker. 881015



- TJ01RT
by:

The product was shipped promptly and fit and function was perfect thank you 873169



- TJ01RT
by:

etrailer.com gave me priority shipping and delivered exactly as promised. I'm very satisfied. 868498



- TJ01RT
by:

Product had some wear and tear on the finish which made me think there was a chance it was not 100% new. Also did not include mounting hardware, which was a bit of a surprise. Thankfully we had saved the hardware from the old jack, but in my opinion, mounting hardware should be included, or at least mentioned in the description that it is not included. Otherwise, product was as-described, measurements were right on. The foot plate of the jack is a little bigger than the old one, which made it not quite able to fully retract without hitting the steel frame of the trailer, so we had to saw off about 1/2" from the back right corner of the foot plate to get it to fit. 867595



- TJ01RT
by:

applied (4) of these to a cargo (box) trailer used as a portable shop. They really firm up the trailer, and I didn't want the other style with exposed screw in our heavily salted region. However, putting them up/down is not as easy as simply cranking on a handle. 861139



- TJ01RT
by:

Nice jack. Holds up the front of the trailer. I checked it the other day, and it still moves and slides freely. Sad thing is, I installed it a year ago, and hadn't moved the trailer since. So I haven't tried it with a load on the trailer, but I normally don't leave anything on the trailer when it isn't attached to the car anyway. One thing I would do differently is that this is meant to bolt onto a flat surface. I bolted across the gap on the bottom of the trailer tongue, and it did bend in a bit. I should have used another piece of 1/8 inch thick steel bar to go between this and the trailer tongue, same as the piece I made and put inside the trailer tongue, so this clamps onto the bottom flanges of the tongue. (The bottom of the trailer tongue is a box shape, but with the bottom only having a 1/4 inch flange on either side, not closed like the other 3 sides). But that is an issue with how I mounted it, and not a problem with the jack. 860931



- TJ01RT
by:

Great value and quick delivery 859354



- TJ01RT
by:

This part was a direct replacement for my motorcycle trailer. The manufacturer of the trailer was not much help. I contacted eTrailer and they hooked me right up. The part shipped promptly and the tracking and notification along the way was tremendous. The part was an exact fit and is working beautifully. 852974



- TJ01RT
by:

Good 851850



- TJ01RT
by:

Fast shipping, great service. I would recommend. 849992



- TJ01RT
by:

Works great!! 844341



- TJ01RT
by:

I installed it...not exactly what I wanted but it IS working as it is designed...I wish there was more room between the "foot" and the mounting point when in the locked (up) position...a little too tight. You can get it locked but it is a bit of a hassle and requires being positive it is locked. 837705



- TJ01RT
by:

Very sturdy and much like the original s. 830556



- TJ01RT
by:

Jack was the exact duplication of the original. Works great 827884



- TJ01RT
by:

Exactly what i needed, thanks for the h elp 829059



- TJ01RT
by:

I messed up my order and Geoffrey was able to get me all hooked up and get my whole order together to arrive at the same time. Bery helpful and i super appreciate the assistance. Actual humans when you call is the best. Thabks etrailer 825108



- TJ01RT
by:

Well made, but like one of the other reviewers said if you do not add a spacer the arm will not fully lock in the up position. It is sturdy, but was able to bend the metal piece and it will now lock in place about 3/4 of the way. If you are going to do this, do it before you mount the stabilizer 817006


36
562
Show More Reviews

Ask the Experts about this etrailer Camper Jacks

  • Are Jacks of Kits # TJ01RT and # TJ01RT-HD the Same
    The single jack part # TJ01RT is the same jacks that come with the pair of jacks # TJ01RT-HD. Also, the part # TJ01RT-HD includes a steel bar # SJ-100-HD for fine tuning the height of the jack. Check out the review video for more info as well.
    view full answer...
  • Parked Trailer Stabilizing Scissor Jack Recommendation for 2019 Wildwood FSX 179DBK
    For a non-electric stabilizer jack for your trailer I recommend another set of scissor jacks like the Ultra Fab scissor jack pairs part # UF48-979002 installed on the front of the trailer as well. I prefer these over the swinging jacks you referenced as they provide more support and the ability to fine tune the support better.
    view full answer...
  • Availability of a Stabilizer Jack for a 2014 Jayco Pop Up Trailer
    We do carry the Domar stabilizer jack # TJ01RT which has a capacity of 650 pounds. I have attached a couple videos too.
    view full answer...
  • Operation Instructions for the Domar Trailer Stabilizer Jack # TJ01RT
    I pulled one of these jacks out of inventory and found that instructions are not included with the jack, so I produced a video, see link, showing how to operate the jack.
    view full answer...
  • Mounting Instructions for the Domar Stabilizer Jacks # TJ014RT
    I would suggest mounting the Domar Stabilizer Jacks, item # TJ01RT, with bolts since welding is not desired. You will need to find a suitable space on the trailer framing to mount the stabilizer jacks. The area will need to be 4 inches by 1-7/8 inches and holes will need to be drilled 3 inches on center apart.
    view full answer...
  • Ground Clearance Needed for Mounting Stabilizer Jack TJ01RT On an RV
    The retracted height of the stabilizer jack # TJ01RT is 11-1/2 inches. You will need to mount the jack so that you will have at least this amount of clearance on level ground so that the jack can be used in most situations. When the jack is folded, it measures 3-1/2 inches from the top of the mounting bracket down. See the included images for a closer look at the jack in both the retracted and folded positions.
    view full answer...
  • Is the Mounting Hardware Included with the Domar Stabilizer Jack # TJ01RT
    The Domar Stabilizer Jack, # TJ01RT, does not include the installation hardware. This jack can be welded or bolted to the trailer frame. Having the jack welded to the trailer frame by a qualified professional would be the best option, but bolting the jack to your trailer will work as well. The bolt holes on this jack are 7/16 inches in diameter and 3 inches apart on center. I recommend using grade 5 or grade 8 bolts for the strongest possible connection. These can be found at most local...
    view full answer...
  • Can Stabilizer Jack Be Used For Cargo Trailer Ramp Door
    The Domar Stabilizer Jack, part # TJ01RT, do have a weight capacity of 650 lbs. I spoke with my contact at Domar and they told me that these would be able to handle the 650 lbs at the point they were attached. If you have a lot of weight concentrated in the middle of the tail gate and these stabilizers are placed on the outside corners, the system may fail. Or if you place too much weight on one side of the tail gate versus the other side, you may have some problems. These are available...
    view full answer...
  • Replacement Drop Leg For Stabilizer Jack On 1994 Eagle Trailer
    We offer one replacement drop leg for a Fulton stabilizer jack. If you have a Fulton jack on your trailer this may work well for you. This is part # FSJ40324. I have attached a photo of this drop leg that has the dimensions noted you can check out. You would need to measure the dimensions of the upper leg on your trailer to see if this would be a match. If you find it does not match I recommend replacing it with one of the jacks on the attached product page like the part # TJ01RT-HD....
    view full answer...
  • How Does the Domar Stabilizer Jack Operate
    The Domar Stabilizer Jack # TJ01RT that you referenced is intended to provide stabilization and support for up to 650 pounds.This jack is not intended to provide lift (as in removing from a coupler), but is intended to stabilize a parked trailer. If your trailer is 1,000 pounds you will want to use at least 2 of these jacks. To raise the jack with the foot in the down position an additional rod is inserted into the jack one hole above where you would like to move the position of the...
    view full answer...
  • Recommended Leveling Jacks For Winnebago View
    The Stabilizer Jack you came from, part # TJ01RT can be permanently mounted typically under the corners of your camper. Each jack has a 650-lb capacity and are sold individually, and are designed for a smaller RV than your View. The stabilizer jacks I recommend for your Winnebago View are the Stromberg Carlson Leveling Scissor Jacks, part # JSC-24-IND. These jacks mount on the corners of your camper and adjust from 4 inches to 24 inches as needed. Each jack has a capacity of 5,000-lbs....
    view full answer...
  • Stabilizer Jacks Needed for a Military M101 A2 3/4 Ton Cargo Trailer
    When fully extended the Domar Trailer Jack, # TJ01RT, measures 18 inches from top of bracket to bottom of foot. We do not have a jack of similar construction that is longer but there are options. We carry 30 inch tall scissor style stabilizer jacks, # JSC-30 (single) and # JSC-30-IND (pair), that would most likely be a better fit with the 25 inch frame height on your Military M101 A2 trailer. This would most likely be the best option for you. We also have the stabilizer leg, # FSJ20324,...
    view full answer...
  • Availability of Stabilizer Jacks for a Winnebago View
    The Stabilizer Jack you were looking at, part # TJ01RT can be permanently mounted. Each jack has a 1000 lb capacity. We also offer Scissor Jacks that can be bolted into place. Part # JSC-24 includes 2 jacks with a 5000 lb capacity for each.
    view full answer...
  • In What Direction Should # TJ01RT Trailer Stabilizing Jacks Be Installed
    In a nutshell, you'll want the RAM # TJ01RT stabilizer jack pointed in the direction where you need the stability. If you're needing fore and aft support, then have the stabilizer jack angled toward the front or rear of the trailer. For side to side support, you'll want the jack pointed to one side or the other. The jacks can be bolted or welded into place.
    view full answer...
  • Where To Mount Stabilizer Jacks In the Front Of Winnebago View
    Typically you mount stabilizer jacks like Item # TJ01RT under the corners of your camper. These jacks have a 650-lb capacity, are sold individually, and are designed to keep your camper level and steady. They have a bolt-on or weld-on installation and you will need to use your own hardware to mount them. You will also need a handle rod like Item # SJ-100-HD to easily fine-tune your height. I have attached some videos for you to check out.
    view full answer...
  • Where To Replace Stabilizers On Winnebago 24G View To Reduce Bouncing
    Typically we say to place the stabilizer jacks part # tj01rt under all 4 corners of a travel trailer or RV. It looks as though your 2014 Winnebago 24G View is a motor home. The jacks are normally used on travel trailers but can be used on the back of your motor home to stabilize the rear end of the motor home from bouncing when you are inside. I recommend to just use 2 stabilizer jacks, 1 at each corner. The jacks measure 3-1/2" when stowed away so please keep that in mind for ground clearance. The...
    view full answer...
  • Recommended Scissor Jacks To Stabilize Winnebago View Sprinter
    To stabilize your Winnebago View Sprinter frame I recommend using scissor jacks like part # JSC-24-IND on the rear corners of your Sprinter. I recommend using 2 jacks. This jack can be bolted or welded when installing. Welding should be done by a certified professional. I recommend these over the # TJ01RT you came from because they have a much higher support capacity. The # TJ01RT has a support capacity of 1000 lbs versus the # JSC-24-IND that has a capacity of 5000 lbs. The # JSC-24-IND...
    view full answer...
  • Are Domar Trailer Stabilizer Jacks # TH01RT Sold in Pairs
    The Domar trailer stabilizing jack you referenced, part # TJ01RT is sold individually. For a pair, you would need to order two of them. We also recommend the Handle Rod, part # SJ-100-HD to adjust the drop of the jack foot.
    view full answer...
  • What Does Stabilizer Jack # TJ01RT Weigh
    The Stabilizer Jack # TJ01RT that you referenced only weighs 4 lbs.
    view full answer...
  • Why Does Cost for Kit of 2 Stabilizer Jacks Change from Individual Cost for Same 2 Jacks?
    Good question. The Stabilizer Jack - 6-1/4" Drop Leg Travel - 18" - 650 lbs - Qty 1 # TJ01RT doesn't come with the Replacement Handle Rod for etrailer and Ram Stabilizer Jacks - 650 lbs # SJ-100-HD which does come included in the kit # TJ01RT-HD. The pricing does change based on the manufacturer costs and stock at any given time, so it is wise to compare as you have done.
    view full answer...
  • Stabilizer Jack Recommendation for 14 Foot Enclosed Cargo Trailer for Motorcycles
    The stabilizer jack I recommend for your enclosed cargo trailer is the Drop Leg Stabilizer Jack # TJ01RT because it will work well to stabilize your trailer for loading and unloading and is easy to engage when needed. The # TJ01RT drop leg stabilizer jack will install on the bottom of your enclosed trailer and can either be welded or bolted onto the trailer. I've attached an installation video for you to see an example of a bolt on installation. Additionally, this jack can support 1,000...
    view full answer...
  • Stabilizing Recommendation for Lightweight Viking Tent Trailer
    Since all of the stabilizer jacks have a minimum clearance, you will need to measure the distance from the mounting point on your trailer to the ground. The JSS-7 stabilizing jack you referenced is designed to be used to stabilize steps. If you have at least 11-1/2 inches clearance, then I would recommend the Domar Trailer Jack, part # TJ01RT. This jack has a load capacity of 650 lbs. I have linked you to an installation video for this jack. If you have less clearance under your...
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality camper jacks for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Installed by:
Joe V
Installed by:
Randy B
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Rachael H
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Jacob T
Video by:
Andrew K
Video by:
Zach D
Updated by:
Adele M
Updated by:
Sarah W
Updated by:
Ronnie R
Updated by:
Amanda M
Updated by:
Hannah L
Updated by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.