Recommended Scissor Jacks To Stabilize Winnebago View Sprinter

Updated 06/20/2016 | Published 06/17/2016

Products Featured in This Question

Stabilizer Jack - 6-1/4" Drop Leg Travel - 18" - 650 lbs - Qty 1

(2045)

$23.54

Crank Handle for Stromberg Carlson Scissor Jacks

(31)

$20.93

Leveling Scissor Jack - 24" Lift - 5,000 lbs

(481)

$54.95

Ultra-Fab Speed Socket Power Drill Adapter for Scissor Jacks

(177)

$11.00

Question:

How many do I need, 2 or 4, and where exactly do they go on the Sprinter frame? Do you have a picture of the installed spots? Thanks! The recommended scissors jacks, not the single leg thingie.

asked by: Curt

Expert Reply:

To stabilize your Winnebago View Sprinter frame I recommend using scissor jacks like part # JSC-24-IND on the rear corners of your Sprinter. I recommend using 2 jacks. This jack can be bolted or welded when installing. Welding should be done by a certified professional.

I recommend these over the # TJ01RT you came from because they have a much higher support capacity. The # TJ01RT has a support capacity of 1000 lbs versus the # JSC-24-IND that has a capacity of 5000 lbs.

The # JSC-24-IND scissor jacks can be adjusted from 4 to 24 inches. This also requires the crank handle, part # JCH-1 which is sold separately.

You can also use the power drill adapter, part # UF48-979005 that makes raising and lowering the jacks much easier. This adapter fits 3/8 inch drills.