Replacement Stabilizer Jack for 2021 Jayco Jay Flight SLX 7 174BH

Updated 09/14/2021 | Published 09/13/2021

Products Featured in This Question

Scissor Stabilizer Jack - 18-3/4" Travel - 2,500 lbs - Qty 1

(785)

$48.82

Stabilizer Jack - 6-1/4" Drop Leg Travel - 18" - 650 lbs - Qty 1

(2012)

$24.82

Stabilizer Jacks - 6-1/4" Drop Leg Travel - 18" - 650 lbs - Qty 2

(2012)

$43.94

Question:

I broke one of my DOMAR model PJ-01 jacks, and I cant seem to find them anywhere I look. I would like to replace them with something that has a similar bolt pattern at least on the main part. I measured their bracket and hole pattern there is a for a lack of a better work a T with 2 bolt holes the plate is 4 inches with a hole roughly 1/2inch in form each side and on the long axis of the jack a third hole at roughly 17inch I wouldnt mind a sissor type jack if there are any that would work with minimal drilling to work Any advice would be great appreciated, also any advice on put some on the front of our 2021 SLX 7 model 174BH that does not have any fron stands and I have been using stand alone stabilizers Thank you

asked by: David D

Expert Reply:

For a replacement jack for your 2021 Jayco Jay Flight SLX 7 174 BH I recommend the Stabilizer Jack - 6-1/4" Drop Leg Travel - 18" - 650 lbs # TJ01RT. This jack same mounting hole dimensions as your current jack at 3 inches apart on center. It has a 650 lb capacity per jack and extends up to 18". It is also sold as a set of 2 ,including the handle, which would be the # TJ01RT-HD. These would also be a great addition to the front of your travel trailer.

I have attached a picture showing the dimensions as well as a review and installation video of the jack for your reference.

expert reply by: Robin H