# 1
Stromberg Carlson 100 Series 5th Wheel Tailgate with Open Design for GM Trucks
One year ago I purchased this model tailgate for my 2003 Silverado. I found immediately that delivery of it as without exception the fastest. This tailgate made the act of hooking and unhooking from my 5th wheel trailer was simplified tremendously. The visual of the Pin lining up with the hitch was very clear. The Tailgate did require some minor assembly by me however minimal tools were all that was needed for the assembly. This took a mere 30 minutes for me to perform and the tailgate fit perfectly. It still looks great to this day and performs excellently. I recommend this product without reservation.
I received and attempted to install the tailgate. The pins and the receivers on the tailgate are of different size. The pins are 1.25 inch diameter and the receivers internal dims on the tailgate 1.125 or even slightly less. It looks to me as though the tailgate receivers where designed for a 1" pin
# 2
Stromberg Carlson 100 Series 5th Wheel Tailgate with Open Design for GM Trucks
This tailgate has made hooking up and dropping our fifth wheel so much easier and saved a little time
We are extremely pleased with the purchase of our 5th Wheel tailgate. Took only 20 minutes from the box to completely installed, including removal of solid tailgate. We will be recommending etrailer to family and friends.
# 3
Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate with Lock for GM Trucks
Tailgate word perfectly for my needs, I live in northwestern New Mexico and use it spring to fall for 5 th wheel convenience during hookup and dropping trailer. The light weight and v shape eliminates much of the fear of baking normal tailgate into trailer. I don’t have to drop tailgate to hook up. Was difficult to sand rubber inserts to fit on initial install but I got it done, also doesn’t provide theft deterrent from bed as the v opens enough for hand to reach latch on by backflip tonneau cover however I knew that would be the case before I purchased. I am totally satisfied with my tailgate.
Worked great! A few times it was difficult to get latched. It would latch after four attempts or less. I checked to make sure it was properly aligned. It was. I would suggest this product to others. Have sold the truck now! Upgraded to a newer one. Thanks
# 4
Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate with Lock for GM Trucks
Hello etrailer staff! My tailgate arrived in a timely fashion but the journey was hard on the box and packing inside the box. UPS beat up on the box to the point of some of the contents are still in a truck or warehouse. I called etrailer and spoke with Noah. He assured me that he would get the missing parts in the mail and I would have all I needed to mount my tailgate. Noah was good to his word. Parts arrived today and the tailgate is mounted. The tailgate should be fine. Thank you Noah and all etrailer Staff. You did a fine job for me and my old 2001 Duramax Chevy.
Not happy with the quality of this gate. All plastic. Latch broke within the 1st week. etrailer did a great job getting me a new latch. Customer support was outstanding.
# 5
Hopkins EasyLift Truck Bed Tailgate Lift Assist
Works very well. I purchased this because im getting older and i still open and close my tailgate regularly at my job. This thing is great.
glad to get it,as my tailgate is HEAVY,will install this weekend.Looking forward to the easy lifting.
# 6
DeeZee Tailgate Assist Custom Tailgate-Lowering System for Classic Chevy Silverado / GMC Sierra
I purchased this Dee Zee lowering system and the Tailgate Easy Lift together and installed them both. I found that having both the lift and lowering helped me greatly. And the best thing is they do not interfere with each other at all. On the lowering system I could not use the top washer because it moved the nut out too far and was rubbing the tailgate, NP. On the easy life, I drilled the holes and then turned my drill bit to where the holes was angled a little to match the torque rod, which made the installation a whole bunch easier . And greased all connection areas on both products. Thanks for sell these products and making it easier for me and my tailgate. And they work great together.......2007 GMC Classic Truck
Received DeeZee in a very timely manner.Price was Great.It took me about 10-15 Minutes to install and works Great on my 2006 Chevy Silverado.Thanks etrailer for youre quick response and product was exact fit for my truck
# 7
DeeZee Tailgate Assist Custom Tailgate-Lowering System for Pickup Trucks
Deezee Tailgate Assist Tailgate : still doing its job. Has lost a little of its zing, so I'll have to see if there's adjustment for that. Installation was easy enough and functioned just as desired (no more tailgate slamming by girlfriend while I'm holding her plants...)
Works awesome it's a great product
# 8
Gorilla-Lift Utility Trailer Tailgate Lift Assist w/ Cable - 300 lbs
Great product, I should have bought this years ago. I installed it on a 6 1/2 x 12' trailer. I'm using 1 spring on the left and 2 springs on the right for the correct balance. I did have to get longer bolts for the round bar. The videos on site are great.
The Lift Assist works as described and installation was straightforward. The only tricky part was experimenting with various combinations of large and small springs to get the correct balance. Also it would be nice if shorter bolts were included for installation on angle iron rails.
# 9
TrailSeal Tailgate Gasket- A Tight Tailgate Seal
I ordered the TrailSeal Tailgate Gasket for my 2022 Ford F-150 Platinum which has a power tailgate. The install took about 15 minutes and appears that it will do a good job of sealing out dust and snow. The kit had good instructions and contained more than enough material. After installation the tailgate closed and locked with a push of the button. When installing make sure you have everything lined up the way you want as the adhesive will not let you reposition the gasket.
I used this to seal around my Ridgeline dual action tailgate. I already had installed a backflip hard folding cover. The seal works great. I now get a very small amount of water in the bed in a hard rain
# 10
Rack'Em Double Barrel Utility Trailer Tailgate Lift Assist w/ Chain - 200 lbs
Received the product. Thanks for the speedy shipping. I have installed the product and am very pleased with it's operation. It was very easy to install . Since it was placed on my trailer's side gate, I only had to make one small change. I drilled two mounting holes into the gate bracket and mounted it with the adjustment holes on the outside in order to keep the lift chain straight on it's sprockets. (shown in picture). I had to purchase nothing extra for the double barrel lifter and it works great. Friends are already commenting on it and getting the order info from me. More will come when the snow and ice clears.
I am very pleased with this product. I have installed this on my split tailgate and it works flawlessly. I have another trailer with the gorilla tailgate assists on both sides. I would pick the RA-27C double barrel over the gorilla springs, hands down. I have included some pics to help anyone else with a split tailgate. This is what I came up with and it works great!
# 11
TrailSeal Full Bed Protection for 2007 to 2019 Chevy and GMC Pickups
After reading instructions twice we installed lower seat for tailgate to 19 1/2 in. mark. Then installed right upright seal(see pic). After checking fit we installed left seal putting it on radius. Much better fitting seal. Had to put seal(excess from upright) on tailgate near latch(zee pic) to try to fill gaps at top of tailgate. Installed on 2018 Chevy silverado. Hope pic go through.
Very disappointed, at first it worked great then the lower seal fell off and hanging within 8 months. I installed this per instructions on a brand new from the dealer truck with a tonue cover.
# 12
Louvered Tailgate Insert for Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate
Great addition to the tailgate. It really brings out the look of your Stromberg Carlson 4000 Tailgate. I have never been one to stand on my tailgate. I always use a step ladder so this will last me a lifetime. Very happy with this purchase.
Make quick release pins thanks. A little bit to pricey by itself, maybe include it with the tailgate?
# 13
TruXedo Universal Tailgate TruxSeal - 10 ft
Seal installed easily With exception of sidewall seal on my 2019 Ford Ranger Lariat. Big gap between sidewall and tailgate, Resorted to putting seal next to the taillight assembly as shown in pictures, no gaps between tailgate and seal.
worked great for about 10 opening and closings of the tail gate, then the large "bottom" piece started coming off. now a year later, the bottom piece is off and I have a dusty truck bed. yay gravel road life....
# 14
Extang MaxSeal Tailgate Seal - 10' Long
The seal works very well on my 2018 Silverado, with the exception of the area near the top of the tailgate, where there is just not a good way to seal it. Not the fault of Extang tape, so I sealed almost all the way to the top and I never have any issues with dirt or rain getting in. I would buy this product again.
I don't know what other pickups are like but Ford didn't do anyone any favors with all the curves in the tailgate. Have said that I followed the directions exactly and got a good seal except for the bottom corners. So I took the little bit of extra and put a piece in each corner (picture) and that pretty much took care of the gap. I have a 2019 F-150.
# 15
Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate with Lock for Ford Trucks
Works well except the "donut" that fits on the driver's side post keeps falling off and the one on the passenger side almost makes it impossible to remove the tailgate.
Plastic but durable. Unless you open and close it a lot. Then the closing mechanisms break. No parts can be found and the warranty says I have to ship the whole thing back to get replaced and I have to cover all shipping.
# 16
Stromberg Carlson 100 Series 5th Wheel Tailgate with Open Design for GM Trucks
Not only was the item delivered on time at a lower price than anther place I ordered and then cancelled after almost two months of waiting it is a very nice tail gate
It fit! A 1999 Chevy 1 ton. 2 holes need to be drilled for the cables, other than that it's perfect, my husband is very pleased! It was fast delivery. Thank you!
# 17
Stromberg Carlson 100 Series 5th Wheel Tailgate with Open Design for Ford Trucks
Thank you for a GREAT product . My order was processed , shipped and delivered with precision . I have an older but reliable 1999 Ford 350 DWD Super Duty and your 5th tailgate fits like a custom made glove . The workmanship is excellent and the finish compliments the overall look of my truck.
So the tailgate instructions are lacking for starters. There’s a few dings on the tailgate where the paint is gone. Looking at the back of the truck, on the bottom where it connects, none of the spacers worked. So the top connections are snug but my bottom connections have play in them. I ordered the right one for my truck year make and model so I’m not sure what that’s about. It looks good, but I wish it fit properly and did not have chipped paint. Shipping was fast.
# 18
DeeZee Tailgate Assist Custom Tailgate-Lowering System for Dodge Trucks
Relatively easy to install. 1st timers should allow atleast 30 mins. In operation: Just pop the tailgate handle & let-go the tailgate opens nicely w/o your assistance. (note: light weight Ram gate) On Installation: the nut assembly, for the tailgate empty hole insertion, may need just a tap w/a hammer to enter the hole; I know I had to tap it. Finally, I hope the spring clips in the ball joint of the pump hold up under regular use... time will tell. Also, the clear protective mylar? If, it's the 3x5 piece of paper I found in item box; I couldn't peel it. Satisfied & thanks! Rob
# 19
DeeZee Tailgate Assist Custom Tailgate-Lowering System for Pickup Trucks
Now I can drop the tailgate and it won’t drop like a sack of rice! Installation is easy until I cut off the washer on the cable bolt only to realize that I don’t need to cut it. Got a replacement washer from O’Reillys. Read and understand the instructions, do not rush it.
Great product very easy to install. You can install in about 30 minutes!!!! No more losing control of tailgate falling fast and out of control.
# 20
Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate with Lock for GM Trucks
This tail gate is very good. It fit perfectly on my 2016 Silverado 3500. The only issue I have is the locking mechanism does not always release. That can be easily resolved with a screw driver or keys. It is an annoyance but other than that it is a good value for the product.
Tail gate is ok the Curt plate and A20 fifth wheel hitch are amazing! Lori in customer service is awesome!!!!
BOLT Tailgate Handle with Lock Installation - 2013 Chevrolet Silverado
Speaker 1: Today in our 2013 Chevrolet Silverado 3500, we're going to be showing you how to install the bolt tailgate handle with bolt lock. Part number is BL5922987. Here's what the bolt lock tailgate's going to look like installed. As you can see, it's almost a carbon copy of what a factory bezel and handle's going to look like, even down to the finish that we have here on the truck. Very, very closely matches the finish that we have on the bezel. Now the additional benefit that we're going to get out of this versus a standard factory tailgate, is that we've got a lock built in.As you can see, our tailgate, inoperable at this point.
Stromberg Carlson Tailgate Installation - 2013 Chevrolet Silverado
Today on our 2013 Chevrolet Silverado 2500HD, we'll be installing the Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate with Lock, part number VGM-07-4000. Now, we'll go hook up to a gooseneck trailer, so you can see what it's like with the tailgate there. Has a nice included lock so we can lock it in place. As you can see along this edge and this edge over here, we have a very factory-like appearance, very like our original tailgate, fits very nicely. We have these nice slats right here, so we can have air flowing through it, so we don't hurt our fuel economy quite as bad as we would with a normal tailgate in the upright position. The first thing we need to do is remove our tailgate. Now, if your tailgate has the included backup camera in it right by the handle, you'll need to unplug that first. You'll find a connection for that behind where your license plate is.
DeeZee Tailgate Assist Custom Tailgate-Lowering System Installation - 2012 Chevrolet Silverado
What's up everybody, Adam here with etrailer. Today, we're gonna be taking a look at the DeeZee Custom Fit Tailgate Assist on our 2012 Chevrolet Silverado. So, my dad bought a new pickup and he doesn't like how the tailgate just flaps down real loud. It's not good on the components. So, I told them it's kind of a no brainer to grab the DeeZee Custom Fit Tailgate Assist. This is just gonna prevent all of that stress happening on all these different joints, in the cable and everything.
Husky Liners Tailgate Installation - 2009 Chevrolet Silverado
Today on our 2009 Chevrolet Silverado, we'll be installing the Husky Liners Premium 5th Wheel Louvered Tailgate with Locking Handle, part number HL15240. As you can see, our tailgate fits very nicely on our vehicle. It has a nice, contoured look, and follows the lines of our bed nicely. Now, if we want to secure our tailgate, it is locking, so we can insert the key, turn it counter-clockwise, remove the key, and now the handle can't be opened and it'll secure our tailgate onto our vehicle to prevent theft. Now, when we want to open our tailgate again, just insert the key, turn it clockwise, remove the key. We'll pull back on the handle and lower the tailgate on down. As you can see, it'll allow us to easily tow our 5th Wheel trailer without having to worry about when we're making turns, having possible damage to our tailgate.
Stromberg Carlson Tailgate Installation - 2009 Chevrolet Silverado
Today on our 2009 Chevrolet Silverado we're going to show you how to install the Stromberg Carlson 4000 series 5th wheel louvered tailgate with lock, part number is VGM-07-4000. As you can see we have a nice snug fit here. The fully adjustable end caps are going to allow us to really give it a really nice customized look. You can see that the gate's going to follow right along with the contours of the truck, gives it a really like a factory or original equipment look. What the gate's got to offer. We're going to have that nice low drop whether we're trying to back up to a goose neck trailer, a 5th wheel trailer, we're not going to have to worry about getting in and out and closing the gate, opening the gate, allows it to pass over very nicely. It's going to have e ventilated or an open design.
Stromberg Carlson Tailgate Installation - 2009 Chevrolet Silverado VGM-07-100
Today on our 2009 Chevrolet Silverado, we're going to take a look at and show you how to install the Stromberg Carlson 100 Series 5th Wheel Tailgate with Open Design. Part Number is VGM-07-100. Now, here's what our gate looks like installed. As you can see, it's a really nice looking addition to the back of the truck ere. It is going to have the open design. It's going to allow for great visibility behind the truck. Sometimes maneuvering, parking, things like that can be an issue with that gate closed.
Stromberg Carlson 5th Wheel Tailgate Installation - 2003 Chevrolet Silverado
Today on our 2003 Chevrolet Silverado, we're going to be taking a look and installing the Stromberg Carlson 4000 series 5th wheel louvered tailgate with lock for a GM vehicle, part number VGM-99-4000. This tailgate's made out of plastic. It's blow-molded for light weight. It's strong as steel, and it replaces your OEM tailgate. It's ideal for towing a 5th wheel or a gooseneck. It's also going to cut down on wind resistance and drag, and help with fuel mileage.
Stromberg Carlson 5th Wheel Tailgate Installation - 2003 Chevrolet Silverado VGM-99-100
Today on our 2003 Chevrolet Silverado, we're going to be taking a look at an installing the Strongberg-Carlson 100 Series 5th Wheel Tailgate with open design for GM trucks. Part number VGM-99-100. This is vented steel design. It's made out of tubular steel that's powder coated. Being vented, it's going to help with wheel efficiency and the wind drag. It's going to help bring up your gas mileage a little bit.
What our customers are saying:
"Awesome Website! Awesome Tracking/Shipping! Awesome Products!"