See what our Experts say about this CURT Hitch Pins and Clips

• Is Class III Trailer Hitch Available for a 2015 Infiniti QX50
  The only trailer hitch designed for your 2015 Infiniti QX50 is the Curt # C11510 which is a Class I rated hitch with a 1-1/4" receiver. So unfortunately there are no Class III trailer hitches that fit a 2015 QX50. If you let me know what you plan on using the trailer hitch for I can make some recommendations for you.
  view full answer...
  
• Recommended Trailer Hitch Receiver for 2004 Mercedes-Benz E320 Wagon
  The Curt hitch # C11701 is a fit for the following models only based on the frame hole locations and vehicle capacity: 2003 - 2009 Mercedes-Benz E-Class Sedan - excluding Sport Package 2006 - 2006 Mercedes-Benz E-Class Wagon - E350 and E55 AMG 2007 - 2009 Mercedes-Benz E-Class Wagon - E350 and E63 AMG 2005 - 2005 Mercedes-Benz E-Class Wagon - E55 AMG For your 2004 Mercedes-Benz E320 Wagon, the Curt # C11820 is the only confirmed fit. It has a capacity of 200 lbs tongue weight and 2,000...
  view full answer...
• Trailer Hitch for a 2019 Mercedes-Benz E-Class
  Yes, we do have a hitch that fits your vehicle. It is the Curt Trailer Hitch - Custom Fit, product # C11454. It's a Class I receiver with a 1-1/4 inch receiver and a maximum gross trailer weight of 2,000 lbs. This one fits both the E300 and the E400 models. I've included a link to the installation guide so you can see what's required to install it. I'm not sure what you plan on using the hitch for. But if you're looking to transport some bikes, I went ahead and linked our selection of...
  view full answer...
• Trailer Hitch Receiver and Bike Rack Recommendation for 2018 Audi A4 Allroad
  We can help you out with a trailer hitch receiver and bike rack for your 2018 Audi A4 Allroad, starting with the hitch. For that I recommend the Curt Trailer Hitch Receiver # C11448. I really like this hitch for your Audi because it is a fantastic value relative to other hitches that fit your vehicle, and has a nice design with a hidden crosstube. This is an installation that many people can do themselves though if you aren't comfortable with it you can absolutely get a local auto body...
  view full answer...
• Trailer Hitch for 2007 Jeep Grand Cherokee SRT8 with Center-Positioned Dual Exhaust
  Yes, the Curt Class I Trailer Hitch Receiver # C11103 is a confirmed fit on the 2007 Jeep Grand Cherokee SRT8 with center-positioned dual exhaust. I confirmed compatibility with Curt's fit guide and also with one of their technicians. The written instructions and a helpful installation article are both linked to assist you. Tools required are listed in the instructions. If you plan to tow you will also need trailer wiring; use part # HM40975-11933 if you have the factory tow package or...
  view full answer...
• Will Curt Trailer Hitch Fit 2007 Mercedes-Benz E-350 Sport
  While there are no trailer hitch fits for your 2007 Mercedes-Benz E-350 Sport, we might still have a solution for you if you can let me know what you plan on transporting. I've reached out to Curt in the past about the Trailer Hitch # C11701 not fitting the Sport model of an E-350 and he said in his notes it didn't say anything about the exhaust being an issue so it is likely that they found that the Sport model requires a lot of fascia trimming for the hitch to fit (as the exhaust and...
  view full answer...
  
• Curt Trailer Hitch Receiver That Fits 2016 Chevy Cruze Limited
  I checked with the manufacturer, and can verify that the only Curt trailer hitch receiver that fits your 2016 Chevy Cruze Limited is the Curt Trailer Hitch Receiver # C11425. The other option you were referring to is actually not a fit for the Limited, it is only a fit for the standard Cruze. I have added a link to the instructions as well as a video install for you to check out. If you plan on doing some light towing with your 2016 Cruze Limited, you'll need some other parts, which I'll...
  view full answer...
• Trailer Hitch Receiver Compatibility with 2018 Hyundai Elantra Sedan
  The Curt Trailer Hitch Receiver - Class I # C11424 is a confirmed fit for the 2018 Hyundai Elantra non-sport model sedan. Because this is the same hitch without the euro ball mount, the Curt # C114242 you asked about will also fit and comes with the 2 inch ball euro style ball mount. If you also need trailer wiring, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118692. This custom-fit T-One connector plugs into your Hyundai Elantra's wiring harness,...
  view full answer...
• Will 1-1/4 Inch Ball Mount With 5-1/2 Inch Rise Work if 5 Inches of Rise is Needed
  That's a good question, and you did indeed measure correctly, from flat ground to the top of your hitch receiver. Since that measurement is 10 inches and your trailer coupler is 15 inches, 5 inches is the correct rise, but an extra half-inch is absolutely acceptable, so you can use the Brophy ball mount: - Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop # BM96 As long as you're within about an inch or so of being level you won't have any issues at all when towing. So the # BM96...
  view full answer...
• Why Does my 2 Inch Hitch have a 1/2 in Pin Hole and a 5/8 in Pin hole
  The Curt Pin and Clip # F-4 that you referenced is designed to work on 1-1/4 inch hitches. The reason your hitch has a 1/2 inch hole and a 5/8 inch hole is because it is setup for an obsolete anti-rattle device Draw Tite J-Pin. We no longer carry the J-Pin so that hole is no longer used. This 1/2 inch hole is not designed to be use as a hitch pin hole, you will want to use 5/8 inch pin and clip like the # PC3.
  view full answer...
• Recommended Trailer Hitch and Wiring for 2018 Hyundai Tucson Sel Plus
  When we research towing capacities we base it off of what the owner's manual says but for some unknown reason there are no online manuals available for a 2018 Hyundai Tucson. I did take a look at the Hyundai website and as you said it listed the SEL Plus as having a 2,000 lb towing capacity as opposed to the 1,500 lb capacity of the SE and SEL; however, it looks like the SEL Plus only has some interior features differentiating it from the SE and SEL so it would not make sense for the capacity...
  view full answer...
  
• How To Transport A 2003 Yamaha YZ250 Dirt Bike With A 2015 Dodge Dart
  Hi Tommy! Motorcycle carriers like the Erickson # EM65MJ, Ultra-Fab # UF48-979033, and the no longer available etrailer e98873 have 500 pounds of capacity and will have no issues carrying you 230 pound 2003 Yamaha YZ250. The problem is going to be your 2015 Dodge Dart. The hitches we have available for your vehicle are all Class 1 (Curt # C11281 and Draw-Tite # 24890) and have 2,000 pounds of towing capacity and 200 pounds of tongue weight capacity. With that being said, you are always...
  view full answer...
• Ball Mount and Roof Rack for 2015 Ford Escape
  Let's start with the ball mount; since your Escape has a towing package and a hitch, you should start with a ball mount. You mentioned a Class II hitch so I am assuming your receiver is 1-1/4". As for the correct rise or drop, since your camper company specified 16 inches to the top of the ball you'll only need to measure from the ground to the top of your hitch receiver and find the difference between the two measurements. If the height of your hitch is greater, you will need a ball...
  view full answer...
  
• Recommended Trailer Hitch Receiver and Wiring for 2014 Audi Allroad
  For your 2014 Audi Allroad B8.5, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11195 which is a confirmed fit. Then you will need a ball mount like # C45521 and Pin and Clip # F-4. Then you'll need a hitch ball. I recommend # A-82 for a 2 inch ball or # A-80 for a 1-7/8 inch diameter hitch ball to match your trailer coupler. For your wiring, I recommend the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. This will allow...
  view full answer...
• Do They Make a 2 Inch Trailer Hitch for a 2005 Volvo S80
  The only trailer hitch receiver they offer for your 2005 Volvo S80 is the Curt Trailer Hitch Receiver part # C12285 which has a 1-1/4" receiver tube opening. Therefore, no they do not offer a trailer hitch receiver with a 2" receiver tube opening on your 2005 Volvo S80. You can obtain a 2" receiver tube opening by using the Curt Trailer Hitch Receiver Adapter part # C45785 but please keep in mind that this will reduce the weight capacity of your trailer hitch by 50%. If you can tell me...
  view full answer...
• Recommended Trailer Hitch Receiver for a 2013 Volkswagen Beetle
  You want the Curt, part # C11354, for your convertible 2013 Volkswagen Beetle. The other hitch you mentioned, part # C11260, fits the coupe model but not your convertible. If you plan to use the hitch to carry a cargo carrier, bike rack, or some other non-trailer accessory you also need to use a support strap, part # 18050, in order to be compliant with Curt's warranty. If instead you'll be towing a trailer with your Beetle, you don't need the strap but do need the recommend ball mount,...
  view full answer...
• Will Curt Class I Hitch Fit a 2024 Honda Civic
  Hey Luis, thanks for reaching out! The Curt Trailer Hitch Receiver # C92UR fits all 2024 Honda Civic models that don't have a center exhaust so it will fit as long as you don't have that! You'll need a 1/2" pin like part # F-4 to fit with this reciver. I'm attaching an installation video of this hitch as well as a photo of it installed for you to reference. The installation video will come in handy if you plan on installing the hitch on your own. What do you plan on using the hitch for?
  view full answer...
• Is There A Way To Transport A Shoprider 6Runner 10 Powerchair With A 2019 Toyota C-HR XLE?
  Hi Chrystal! You are indeed going to want a hitch for towing a small trailer. The hitches we have available for your 2019 Toyota C-HR XLE are going to Class 1 options with the 1-1/4" receiver, so there aren't any cargo carriers that a big enough to accommodate the chair, unfortunately. I found the specs for the Shoprider 6Runner 10 Powerchair, thanks for giving me the model, and it looks like it weighs 176 pounds and is 24" wide by 40" long. The closest option we have to that is the Curt...
  view full answer...
• Ball Mount For Curt Trailer Hitch With 2023 Subaru WRX
  Hey Edgar, For the Curt Trailer Hitch Receiver # C84ZV that fits your 2023 Subaru WRX, the ball mount/drawbar Curt recommends is the 2-5/8" Rise/3-1/4" Drop Curt Drawbar # C45521. Just keep in mind this drawbar doesn't come with a pin and clip or hitch ball, so you'll need to get that separately. For the pin and clip use # F-4, or instead you can secure it with Hitch Lock # e98879. For a hitch ball, depending on your trailer coupler you'll need either 1-7/8" Hitch Ball # C40001 or 2"...
  view full answer...
• How to Tell if a 2017 Honda Civic Can Tow the Yakima EasyRider Trailer
  Hey Brittney, thanks for reaching out! The Yakima EasyRider Double Decker Trailer # Y08129 weighs in at 175 lbs so as long as Honda has said it's okay to tow a trailer with your 2017 Honda Civic. I tried looking this up in the owner's manual but wasn't able to find any online manuals to confirm this. If you don't already have towing parts for your Honda Civic then I recommend picking up the following to accomplish this: - Draw-Tite Sportframe Trailer Hitch Receiver # 24954 - Wiring...
  view full answer...
• Replacement Hitch Pin and Clip Options
  Hey Cody, thanks for reaching out! For a 1-1/4" hitch then you need the Pin and Clip # F-4, but for a 2" or 2-1/2" hitch you need the Pin and Clip # C21500. If you need a more specialized pin just let me know what ball mount you're needing to install and I'd b more than happy to help you figure out what you need!
  view full answer...
• Is the Curt Ball Mount part # C45270 a Hollow or Solid Shank Ball Mount
  The Curt Ball Mount part # C45270 that you referenced is a hollow shank accessory. It may seem counterintuitive but hollow shank accessories are actually stronger than solid ones and would be considerably lighter. This ball mount has a 7,500 lb trailer capacity and 750 tongue weight capacity. Based on the weight of your trailer this ball mount should work well. For a 2-5/16 inch ball to fit this you would want the part # C40007, for a pin and clip # F-4 or for a locking one part # e98880.
  view full answer...
• Recommended Trailer Hitch on 2018 Cadillac CTS-V
  Yes, we do have parts that'll fit your 2018 Cadillac CTS to tow a trailer. From what I've found your car has a maximum capacity of 1,000 pounds tops. You didn't mention the size or weight of the trailer but just make sure you stay within this limitation. I also recommend checking your owner's manual just to verify the number. To fit the Cadillac you want the Curt hitch # C11900. It's a custom fit for the Cadillac and also has a concealed cross tube so you won't be messing with the...
  view full answer...
  
• Trailer Hitch Fit For 2015 Ford Fiesta ST Hatchback
  The 2015 Ford Fiesta ST is the hatchback model, and we have a trailer hitch is confirmed to fit. You would need the Curt Trailer Hitch Receiver # C11067. The accompanying photo is of a hitch on a Fiesta; I have also added a link to an install video so you can see exactly what you'll need to do. The only trimming you'll need to do is a 2" section of the heat shield which means there is no fascia trimming needed at all. Since you mentioned you will be towing there is a specific ball mount...
  view full answer...
  

Do you have a question about this Hitch Pins and Clip?