The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
Hey Josh! Yes, you can lock the BulletProof Hitches Aluminum Adjustable 2-Ball Mount #BPH97MR to your hitch receiver by using the Locking Kit #BPH34FR. This comes with a lock for the hitch receiver as well as the adjustable part of the platform so…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
Hello Andrei, There isn't an axle we can offer as there aren't any that small we have, but you may be able to get a different hub. I couldn't find the bearing sizes of that axle to find a new hub so you'll have to do a bit of…
Hey Paul, the most similar weight distribution shank we have to the part #RP69FR that fits a 2-1/2 inch hitch is the part #BPH75RR which fits the same heads as the Reese shanks so it will also work with same heads.
We aren't manufacturers of those parts, and we don't have the testing ability in house, so I reached out to a couple of our manufacturers to see what information they could provide to try and help. I reached out to my contact at Curt…
Thanks for all of the information Brent! You have done your home work extremely well. Let me reassure you that as long as your Newmar Dutch Star has a fully functional 7-way connector you won't need to address anything on your RV as far as wiring…
Hey Joanne, I think I've found what you're looking for with the Surehoof Ribbed Rubber Trailer Mat #4872SM. This measures 48" x 72" which I would think is enough to cover your ramp and help your horse feel a little more comfortable…
Good afternoon Nathan, that's a great question! You can use the etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers #e38FV with a 3" to 2" reducer adapter like Buyers Products 3" to 2" Receiver Tube Adapter…
Probably not unless you want to cut that round hole into a 2-1/4" square. The Square A-Frame Jack w/ Footplate item #e74VV is designed for a-frame trailer's that have a square cut out not the standard 2-1/4" circular cut out which I am…
The short answer is Yes, bearing #15123 is slightly larger and stronger than #LM67048 and they use different races which means they are not interchangeable. Bearing 15123 uses race #15245 which has an outer diameter of 2.441 inches and bearing…
Hello Justin, thanks for reaching out. The XL Anti-Rattle Trailer Hitch Receiver Lock #SHP2040-XL is NOT compatible with the Weigh Safe Hitch w/ Built-In Scale #WS68RR. The receiver lock requires a hollow shank and the shank of the Weigh Safe ball…
(2)
(1)
(1)
Filter Results
