Tang Replacement Spindle Washer

Tang Replacement Spindle Washer

Item # 5-71

lowest price pledge

Our Price: $3.28

Accessories and Parts

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.07 lbs

Quantity: 
In Stock, Ships Today
5-71 - Spindle Washer Redline Trailer Spindles
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Videos


  • Trailer Spindles
  • Spindle Washer
  • Redline
  • 1-1/2 Inch I.D.
Call 800-298-8924 to order Redline accessories and parts part number 5-71 or order online at etrailer.com. Free expert support on all Redline products. Guaranteed Lowest Price and Fastest Shipping for Tang Replacement Spindle Washer. Accessories and Parts reviews from real customers.


  • All Info
  • Reviews (4)
  • Q & A (13)
  • Videos (1)
  • Photos
  • Why etrailer?

Redline Accessories and Parts - 5-71


Replacement Tang Type B spindle

  • 1-1/2" I.D.



5-71 Tang Replacement Spindle Washer







Video of Tang Replacement Spindle Washer


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Redline Trailer Spindles 5-71 Review


Customer Reviews

Tang Replacement Spindle Washer - 5-71

Average Customer Rating:  4.8 out of 5 stars   (4 Customer Reviews)


- 5-71
by:

This was an easy buying experience. The sales representative was extremely helpful and very patient. I am not the end user for the items I purchased so I can not speak to that but, the service was excellent! 700028



- 5-71
by:

nice stuff thank you 629723



- 5-71
by:

I received the washer I order in a timely manner. Excellent condition. Great price. I usually have trouble finding the right parts I’m needing online but I found what I needed and had it ordered in about 5 minutes. Very efficient. Thanks! 568308



- 5-71
by:

item was just what I needed, great price and extremely fast service. 397871


4
4

Ask the Experts about this Redline Accessories and Parts

Do you have a question about this Accessories and Part?


  • Should There Be a Washer on Trailer Spindle Between Spindle Nut and Outer Bearing
  • There really should be a flat washer between the outer bearing of your hub and the nut that holds it on. The washer protects the back side of the bearing from the edges and points on the back side of the spindle nut. The Washer For 1 inch Spindle, # SW1000, is typically used on spindles that have a castle nut, like # 165686, and a cotter pin, # 165649. A D washer, # 5-23, would be used on a spindle that has a flat side and uses the same castle nut and cotter pin setup. A Tongue...
    view full answer...

  • Replacement Washer for an EZ Lube Trailer Spindle
  • EZ lube spindles generally use a tang washer to prevent the castle nut from turning. There are different sizes available depending on what is needed. For example, # 5-101 has an inner diameter of 1 inch. Washer # 5-71 has a different design and a 1-1/2 inch inner diameter. Washer # 5-59 is similar but larger with a 1-3/4 inch inner diameter. Sometimes you will see a D-shaped opening on an EZ spindle washer such as # 5-23. On this one the distance from the straight edge to the furthest...
    view full answer...

  • Causes for Hub Castle Nut to Come Loose After Installing and Using Hubs
  • A tang washer like # 5-101 or # 5-71 has a tab to secure the castle nut on the spindle so that it cannot rotate or back off on the threads. If the tang washer tab (or a cotter pin) is still in place in the notch on the castle nut (as in the linked photo) the nut should not be able to move. The only other place where slack in the hub's fit could develop is at the back side where the grease seal installs. This is the portion of the spindle noted by the arrow in the linked diagram. If the...
    view full answer...

  • Availability of Trailer Spindle Washers with Tabs
  • If you are talking about a washer like # 5-101, we have them. I cannot speak for any auto parts store but etrailer is here for you. We also have some other tang washers: # 5-59 or # 5-71.
    view full answer...

  • Trailer Spindle Washer with a 1-1/2 Inch Inner Diameter
  • We have a tang washer, # 5-71, which has a 1-1/2 inch inner diameter. I have linked a video of it for you. It is the only spindle washer we have with a 1-1/2 inch inner diameter.
    view full answer...

  • Is a Spindle Washer Needed Between the Spindle Nut and Outer Bearing on Dexter 5 on 4-1/2 Hubs
  • Yes, there should be a washer of some type between the spindle nut and the bearing on your trailer. The washer protects the back side of the bearing from the edges and points on the back side of the spindle nut. There are several types of spindle washers available depending on the spindle configuration on your trailer. The Washer For 1 inch Spindle, # SW1000, is typically used on spindles that have a castle nut, like # 165686, and a cotter pin, # 165649. A D washer, # 5-23, would...
    view full answer...

  • Should There Be a Washer on Trailer Spindle Between Spindle Nut and Outer Bearing
  • There really should be a flat washer between the outer bearing of your hub and the nut that holds it on. The washer protects the back side of the bearing from the edges and points on the back side of the spindle nut. The Washer For 1 inch Spindle, # SW1000, is typically used on spindles that have a castle nut, like # 165686, and a cotter pin, # 165649. A D washer, # 5-23, would be used on a spindle that has a flat side and uses the same castle nut and cotter pin setup. A Tongue...
    view full answer...

  • Replacement Spindle Washer For 3,500 Lb EZ Lube Spindle
  • For a 3,500 lb EZ Lube axle, the replacement spindle washer you will need is part # 5-101. This washer has an inside diameter of 1 inch, so you may want to measure the spindle diameter to be certain. We do offer other replacement spindle washers, like part # 5-71 for 1-1/2 inch spindles, and part # 5-59, which is for spindles that measure 1-2/4 inches.
    view full answer...

  • Spindle Nut Washer and Grease Seal for a Dexter 3500 Pound E-Z Lube Trailer Axle
  • The Replacement Spindle Washer, # 5-101, was designed specifically for E-Z Lube axles, so that should be the correct washer for you. You can make sure that your spindle has a 1 inch diameter at the end where the washer will be. It sounds like you have a #84 spindle which is for 3500 pound E-Z lube axles. The correct seal would be # RG06-050, for a pair of double lip seals. To be sure, you would need to find the bearing numbers of the inner and outer bearings. The numbers are stamped...
    view full answer...

  • Type of Spindle Washer Used on Boat Trailer Spindle with a Notch/Slot on Spindle
  • Actually what you have is pretty standard. It's a tang washer setup. We have the part # 5-101 or part # 5-71 which are similar styles. I attached a picture of what the part # 5-101 is designed to fit.
    view full answer...

  • Inner Diameters of Tang Washer Type B
  • The only two Tang Washer - Part B that we carry are the Tang Replacement Spindle Washer # 5-71 which has a 1-1/2 inch inner diameter and the Dexter Tang Washer - Type B # 5-59 which has a 1-3/4 inch inner diameter.
    view full answer...

  • Inner Wheel Bearing Recommendation for a Number 84 Spindle
  • The inner and outer bearing surfaces on a number 84 spindle are different diameters. The outer bearing will ride on a 1.00 inch diameter surface and the inner bearing will ride on a 1.378 inch surface. It sounds like you have the correct outer bearing and now are in need of the correct inner bearing. For that you would want the part # L68149 that you referenced. You will want to use a spindle washer. The washer protects the back side of the bearing from the edges and points on the...
    view full answer...

  • Tang Spindle Washer With 1 inch Diameter
  • The only tang spindle washer we offer with a 1 inch diameter is TruRyde part # 5-101 for an E-Z lube spindle. It does have two prongs to bend down over the castle nut. The Redline washer part # 5-71 is 1-1/2 inches in diameter. I have attached a video for your reference.
    view full answer...


Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael H
Installed by:
Jeff D
Updated by:
Laura H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924