Tang Style Washer for Trailer Spindle with Castle Nut
Updated 05/18/2020 | Published 05/14/2020
Products Featured in This Question
Question:
looking for tang washers for castle nuts
asked by: David L
0
Expert Reply:
It sounds like you are looking for the Replacement Spindle Washer - Tang Type for E-Z Lube # 5-101 if you have the D shaped spindle. If you don't then you will want the Tang Replacement Spindle Washer # 5-71 which has a 1-1/2 inch inner diameter or the Dexter Tang Washer - Type B # 5-59 which has a 1-3/4 inch inner diameter.
expert reply by:
Jason S
0
Product Page this Question was Asked From
Replacement Spindle Washer - Tang Type for E-Z Lube
- Accessories and Parts
- Trailer Spindles
- Spindle Washer
- 1 Inch I.D.
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Method for removing and Installing Tang-Style Spindles Washers
- Q&A: Can You Use 8,000 lb Leaf Springs On A 7,000 lb Axle?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Q&A: Should There Be a Washer on Trailer Spindle Between Spindle Nut and Outer Bearing
- Q&A: Length of Parking Brake Kit Cable
- Q&A: Who Makes The Best Quality Trailer Bearings?
- Q&A: Most Common Trailer Brake Line Fitting Size
- Q&A: Recommended Black Armour Heavy-Duty Trailer Mat
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers