bing tracking image
  1. Trailer Hubs and Drums
  2. Dexter
  3. 8 on 6-1/2 Inch
  4. For 9000 lbs Axles
  5. For 10000 lbs Axles
  6. Hub
Dexter Oil Hub for 9K to 10K General Duty Axles - After April 2013 - Qty 1

Dexter Oil Hub for 9K to 10K General Duty Axles - After April 2013 - Qty 1

Item # 008-430-03
Retail:$710.99
Our Price: $361.48
You Save: $349.51
Trailer Hubs and Drums
Shipping Weight: 24 lbs
Add to cart
In Stock
008-430-03 - For 9000 lbs Axles,For 10000 lbs Axles Dexter Trailer Hubs and Drums
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Hub fits 9K to 10K axles manufactured after April 2013. Inner race (382A), outer race (25520), and studs included. Bearings and seals sold separately. Great Prices for the best trailer hubs and drums from Dexter. Dexter Oil Hub for 9K to 10K General Duty Axles - After April 2013 - Qty 1 part number 008-430-03 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (11)
  • Q & A (0)
  • Photos

Dexter Trailer Hubs and Drums - 008-430-03

  • 8 on 6-1/2 Inch
  • For 9000 lbs Axles
  • For 10000 lbs Axles
  • Hub
  • 16 Inch Wheel
  • 16-1/2 Inch Wheel
  • 17 Inch Wheel
  • 17-1/2 Inch Wheel
  • Standard
  • 25580
  • 387A
  • Dexter

Hub fits 9K to 10K axles manufactured after April 2013. Inner race (382A), outer race (25520), and studs included. Bearings and seals sold separately.


Features:

  • Trailer hub can be used on an idler axle or paired with a slip-on rotor for disc brake applications
  • Oil bath lets you check lubricant level without disassembling the hub
  • Sturdy iron construction


Specs:

  • Application: Dexter 9,000-lb and 10,000-lb general duty axles
    • Works with axles manufactured after April 2013
  • Bolt pattern: 8 on 6-1/2"



Bearing, Race, and Seal Information

  • Bearings (sold separately)
    • Inner bearing: 387A
    • Outer bearing: 25580
  • Races (included):
    • Inner race: 382A
    • Outer race: 25520
  • Seal 10-51(sold separately)
    • Inner diameter: 2.875"
    • Outer diameter: 3.88"


008-430-03 Dexter Axle Oil Hub for 9,000-lb - 10,000-lb General Duty Axles - Qty 1





Customer Satisfaction Score:


Customer Reviews

Dexter Oil Hub for 9K to 10K General Duty Axles - After April 2013 - Qty 1 - 008-430-03

Average Customer Rating:  4.8 out of 5 stars   (11 Customer Reviews)

Hub fits 9K to 10K axles manufactured after April 2013. Inner race (382A), outer race (25520), and studs included. Bearings and seals sold separately.

by:

Very pleased with etrailers. Great costumer service and fast shipping.



by:

packaging can use some care.



by:

I ordered the part I needed and it showed up not only on time but it was the correct part



by:

worked great no one in the area had one great price fast shipping



by:

All good



by:



by:



by:



by:



by:

good price and fast delivery



by:


11
11

See what our Experts say about this Dexter Trailer Hubs and Drums

  • Dexter Hub # 008-430-03 Replacement Wheel Studs
    Yes, the Dexter Hub part # 008-430-03 you referenced does use the replacement studs part # RG03-120 that you also referenced.
    view full answer...
  • Solution for Needing Replacement Dexter 8-430-5 Trailer Hub
    The 8-430-5 you are wanting is very similar to the Dexter Trailer Hub Drum Assembly # 8-430-5UC3 we carry but it doesn't come with bearings and seals. While you aren't in need of those things they are relatively inexpensive so the price savings wouldn't be too big. Since this isn't a super popular replacement hub we just don't have all versions of it at this time.
    view full answer...
  • Drum Assembly For Dexter 9k to 10k Oil Bath Hub 008-430-03
    Yep, we have what you need as there is a drum that you can use with your Dexter Oil Hub for 9K to 10K General Duty Axles - After April 2013 # 008-430-03. The correct part is the Dexter Trailer Brake Drum for 9,000-lb to 10,000-lb Axles # DX64FR.
    view full answer...
  • What is the Part Number of the Hub from the K08-288-90 Assembly?
    Yes, we do sell the hub alone from the Dexter Trailer Hub and Drum Assembly for 9K to 10K Axles - 8 on 6-1/2 - Oil Bath # K08-288-90. That part is the # 008-430-03. It is important to note that this is the idler hub version that has a different design that comes with the # K08-288-90.
    view full answer...
  • What Is The Difference Between The Dexter Oil Hub 008-430-03 & The Dexter Trailer Hub 8-288-3UC1?
    The only difference between the: -Dexter Trailer Idler Hub Assembly for 9,000-lb to 10,000-lb Axles # 8-288-3UC1, & the, -Dexter Axle Oil Hub for 9,000-lb - 10,000-lb General Duty Axles # 008-430-03, is that # 008-430-03 is the new style, and is designed to work with 9,000 LB & 10,000 LB General Duty Axles After April 2013. Whereas, the Dexter Trailer Idler Hub Assembly for 9,000-lb to 10,000-lb Axles # 8-288-3UC1 is the old style, and is designed to work with 9,000-lb axles made after...
    view full answer...
  • Disc Brake Kit For Gooseneck Trailer With Dexter Idler Hub 008-430-03
    Thanks for writing in and giving all that information, Michael, it was very helpful. And with that info, I was able to possibly find a solution for adding disc brakes that will work with your 7-bolt brake flange. The important thing here was the hub you mentioned, as there is a kit designed exactly for the Dexter Oil Hub for 9K to 10K General Duty Axles - After April 2013 # 008-430-03. I do need to note that the reason I say "possible" is that this will only work if you have the leaf spring...
    view full answer...
  • Replacement Wheel Studs for 2006 Pro Trak Trailer With 10k Axles
    To replace the wheel studs you will need to start by identifying the correct size for your hubs. This varies between the brand and part number. For example, a 10k hub like the # 008-430-03 uses 5/8" x 3-1/8" studs # RG03-120. Others may use 5/8" x 2-3/4" like # 7-232. Measure the length (from the bottom of the head to the very end of the bolt) and width to find the correct size. Once you have the correct size for your hubs, simply drive out the old ones and drive in the new ones to replace...
    view full answer...
  • Replacement Dexter 9,000 lb Idler Hubs
    You'll definitely need idler hubs to go to disc brakes, and while we don't have 9k disc brakes, we potentially have the hubs. This will depend on when your Dexter general duty axle was made, and the only thing we have are oil bath idler hubs. - Axles Manufactured After April 2013: Dexter Oil Hub for 9K to 10K General Duty Axles # 008-430-03 - Axles Manufactured Before July 2009: Dexter Trailer Idler Hub Assembly for 9,000-lb to 10,000-lb Axles - 8 on 6-1/2 - Oil Bath # 8-288-3UC1
    view full answer...
  • Which Disc Brake Conversion Kit For 10000lb Dexter Axle Made In 2020
    For your 10000lb Dexter oil bath axle made in 2020 you will need to go with the Kodiak Disc Brake Kit # K2R1058D11E since your axle uses leaf springs, and is not a torsion axle. This will work with dual 16" wheels so you will need to make sure that is what your trailer currently uses. You will need to use Dexter Axle Oil Hub # 008-430-03 for each spindle to allow you to install the above kit unless you already have idler hubs. For an actuator to control these new disc brakes I recommend...
    view full answer...
  • Replacement Hub Options For a Dexter D1012 With Bearings 387A and 25580
    Here is your options for a Dexter D1012 with the Inner Bearing # 387A, Inner Race # 382A, Outer Bearing # 25580, and Outer Race # 25520. Idler Hub Prior July 2009 # 8-288-3UC1 Idler Hub After April 2013 # 008-430-03 Hub/Drum Prior July 2009 # K08-288-90 Hub/Drum After July 2009 # 8-430-5UC3 All but the Idler Hub After April 2013 # 008-430-03 include all the bearings and seals. For this you will have to also add the following components for each hub. Inner Bearing # 387A Inner Race #...
    view full answer...
  • Parts Needed To Covert Electric Drum Brakes On Triple Axle Texas Pride Car Hauler To Hydraulic Disc
    I was able to determine that your 9,000lb axles on your Texas Pride Trailer will accept the Dexter Axle Oil Hub # 008-430-03. It uses the same Outer Bearing # 25580, Inner Bearing # 387A and this will use the Oil Seal # 10-51 which is the same 2.875 inner diameter as your grease seal. You will need the Oil Cap Kit # RG04-270 for the new hubs. And the Kodiak Synthetic Bearing Oil # XLPROLUBE can be used with all manufactures. The Kodiak Disc Brake Kit # K2R1058D11E will provide you with...
    view full answer...
  • Disc Brakes for Dexter Axle Oil Hub 008-430-03
    We do have a disc brake kit that is compatible with the Dexter Axle Oil Hub for 9,000-lb - 10,000-lb General Duty Axles # 008-430-03 and for Dexter general-duty axles manufactured after May 2013. This disc brake kit is for spring axles only (which just means it will not fit torsion axles), and is the following: - Kodiak Disc Brake Kit - 11" Rotor - 8 on 6-1/2 - E-Coat Finish - Leaf Spring - 10,000 lb Dexter # K2R1058D11E These are over-the-hub rotors with cast iron calipers for exceptional...
    view full answer...
  • Recommended Kodiak Disc Brake Kit for a Dexter 10K Axle
    The disc brake kit I recommend for a Dexter 10,000 Lb Axle is the Kodiak Disc Brake Kit part # K2R1058D11E which will also require the Dexter Oil Hub for 9K to 10K General Duty Axles part # 008-430-03. Please note this setup is designed for axles made after May 2013 with leaf springs so if you have something different please just let me know. The manufacture's date code is listed on the axle tag in the center of the beam. If you don't want to reuse the old bearings/races and seals you'll...
    view full answer...
  • How To Convert Dexter Electric Drum Brakes to Hydraulic Disc Brakes on 10K Axle
    In order to convert a Dexter 10K Axle (Made After May 2013) from electric drum to hydraulic disc brakes you'll need the following: Kodiak Disc Brake Kit part # K2R1058D11E (1 per Axle) Dexter Oil Hub for 9K to 10K General Duty Axles part # 008-430-03 (2 per Axle) Inner Bearing part # 387A (2 per Axle) Outer Bearing part # 25580 (2 per Axle) Oil Seal part # 10-51 (2 per Axle) Replacement Oil Cap Kit part # RG04-300 (2 per Axle) Hydrastar Electric Over Hydraulic Actuator Kit part # HBA16-252-82...
    view full answer...
    Image 1 for Image 2 for
  • How To Switch From Electric Drum Brakes To EOH Disc Brakes For 10k General Duty Dexter Axles
    Since we don't know for sure what you axle is I do recommend first contacting Dexter and to try and confirm exactly what kind of axle you have. If you haven't really looked at them I do recommend getting under the trailer and trying to find a tag because it will make this process much easier. Assuming you have Dexter 10k general duty axles there will be two choices depending on the hub: Option 1: Kodiak Disc Brake Kit # K2R1058D11HD, which uses the Dexter Trailer Idler Hub Assembly...
    view full answer...
  • Converting to Electric Over Hydraulic Disc Brakes on 2021 Diamond C Trailer
    According to Dexter, the Kodiak Disc Brake Kit # K2R1058D11E is compatible with your 10,000 lb Lippert axles. For idler hubs you can use the Dexter Oil Hub # 008-430-03. From there you will need the Hydrastar Electric-Hydraulic Actuator w/ Line Kit # CAR-HBA16-2. This comes with the brake actuator as well as the hydraulic brake lines. If you don't already have a breakaway installed, I recommend the Bright Way # 3802308. If you need a brake controller as well, you can use the # RED24FR...
    view full answer...
  • Converting 2016 Diamond C 10k Axle Trailer and Iron Panther 7K Axle Trailer to Disc Brakes
    The D100G axles on your 2016 Diamond C trailer are 10,000 lb axles. Based on the manufacture date you need the Kodiak Disc Brake Kit - 11" Rotor - 8 on 6-1/2 - E-Coat Finish - Leaf Spring - 10,000-lb Dexter # K2R1058D11E which fits the # 008-430-03 hub made after May 2013. If you need hydraulic brake lines I recommend the Hydrastar Hydraulic Brake Line Kit # HS496-252 or # HS496-253. I'm not sure if you have tandem or triple axles so I gave you the option for both. For an actuator and...
    view full answer...

Do you have a question about this Trailer Hubs and Drum?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Cole B
Installed by:
Cole B
Employee Andy C
Installed by:
Andy C
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Michael B
Updated by:
Michael B
Employee Carrie F
Updated by:
Carrie F
Employee Mike S
Written by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924