bing tracking image
  1. RV Water Pump
  2. Seaflo
  3. Macerator Pump
  4. 12V
  5. 12.0 GPM
Seaflo Macerator Pump for Boats and RVs - 12 GPM - 1-1/2" Inlet - 1" Outlet - 12V

Seaflo Macerator Pump for Boats and RVs - 12 GPM - 1-1/2" Inlet - 1" Outlet - 12V

Item # SE64FR
lowest price pledge
Retail:$99.99
Our Price: $87.99
You Save: 12%
RV Water Pump
Orders above $99 qualify for Free Shipping
Shipping Weight: 6 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Self-priming macerator pump empties your marine fish box, livewell receptacles, or RV sewer tank. 4-Blade chopper reduces risk of clogs. Sealed motor and durable powder coat prevent internal and external corrosion. Lowest Prices for the best rv water pump from Seaflo. Seaflo Macerator Pump for Boats and RVs - 12 GPM - 1-1/2" Inlet - 1" Outlet - 12V part number SE64FR can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (3)
  • Q & A (0)
  • Videos (2)
  • Photos
  • Why etrailer?

Seaflo RV Water Pump - SE64FR

  • Macerator Pump
  • 12V
  • 12.0 GPM
  • Seaflo

Self-priming macerator pump empties your marine fish box, livewell receptacles, or RV sewer tank. 4-Blade chopper reduces risk of clogs. Sealed motor and durable powder coat prevent internal and external corrosion.


Features:

  • Macerator empties your marine fish box, livewell receptacles, or RV sewer tank
  • 4-Blade, stainless steel chopper reduces risk of clogs by grounding fish scales and residual waste
    • Cannot handle rags or hard objects
  • Triple-sealed motor and durable powder coat prevent internal and external corrosion
  • Thermally protected sensor controls run-dry period to allow for initial priming
    • Self-priming to a 5' lift when wet and 4' lift when dry
  • Copper and rubber impellar construction is durable
  • Bolt-on installation - mounting hardware not included
    • Mount as close to tank as possible for optimum performance


Specs:

  • Overall dimensions: 11-3/16" long x 5" wide x 3-7/8" tall
  • Mounting base dimensions: 3-1/8" long x 4-11/16" wide
  • Voltage: 12 volts DC
  • Maximum power draw: 12 amps
  • Flow: 16 gallons per minute
  • Ports:
    • Inlet: 1-1/2" MPT and 1-1/2" hose barb
    • Outlet: 1" hose barb
  • 4-Year limited warranty


SFMP1-120-01 Sea Flow Macerator Pump for Boats and RVs - 12 GPM - 1-1/2" Inlet - 1" Outlet - 12V





Video of Seaflo Macerator Pump for Boats and RVs - 12 GPM - 1-1/2" Inlet - 1" Outlet - 12V

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Seaflo Boats and RVs Macerator Pump Review

What's up, everybody, Adam here, we're at the property. This is the lake that I like to fish in, and this is the boat I use the catch my fish. So we had a problem. And the problem is, this deck that we put in isn't really sealed the best. So when it starts raining and stuff, the boat starts to fill up with water. So basically what we had to do is literally back my car down here and pull it up off the shore because the drain plugs at the bottom in the back.

It took a while and I'd rather just not have to do that. So what we did was we put in a bilge pump. So this is the sea flow bilge pump. Basically what we did, we put this in here, grabbed some tubings, some hose clamps and a switch. So we can go from having water in the boat to having no water in the boat.

So let's see how it works. It's a lot easier. And it's actually more satisfying just to sit here and flip a switch and watch all that water go out. So this is just gonna give me to the trails or on the lake a lot faster, which is awesome. So basically work smarter, not harder, right And that's what the bilge pump is gonna do for me.

So you can either use this in a live well, you can use it with just getting water out of your boat. There's a lot of different applications that you can do. It is gonna be sealed. So keeping it out of the elements, isn't really something you need to do. So it's a sealed system and it primes on its own, which is nice.

And that's a decent amount of water flow about 12 gallons per minute. So if this thing's completely full, it'll probably only take a minute or two to get it all pumped out. And that gets me pretty pumped. Notice how we have a decent amount of stuff in our boat. Well, we don't really have to put like a screen on this hose or anything 'cause the inside of the pump has a chopper in there. So it's gonna kind of chop that up. If you're using it for a live well, it's gonna take care of all those fish scales and stuff like that. So you really don't have to protect it. It protects itself from the elements. It's a submersible pump. It really wanted to do it that way. But all in all, it's kind of a easy installation. You don't really have to worry about anything. You just put it where water is and it gets rid of it. Well, just like that. I mean, there's a little bit of water left in there, but that's not gonna make us sink. So that's really awesome. Literally took maybe 50 seconds, a little under a minute to get all that water out and trust me, there's a lot of water in there. So that's really nice. Yeah. So we can get out on the boat. That's literally what it all comes down to. That's why we have a boat. So this way we can just get on and catch some fish a little bit quicker. Our boat is gonna be run by 12 volts. So we wanna make sure that we're not pumping 115 or 120 volts of this thing. So 12 volt DC systems. And it's gonna pump 12 gallons per minute. So what kind of helps that happen is just a big inlet and outlet. So this is gonna wanna just prevent clogging from whatever's in your boat or whatever's in your RV's tank when it comes to your sewage and stuff like that. So we don't really want this thing to clog and it's not going to. It does have a steel blade, which is stainless steel. So it's gonna reduce the risk of that stuff really clumping it up, which is always a plus. And that's basically it. You just gotta bolt it on to install it. You gotta hook it up to a 12 volt DC battery. But one thing I would definitely do is just grab a switch just so you can turn it on and off whenever you want. Well, that's basically it. If you guys are like me and you like to work smarter not harder, grab yourself a pump for your boat so you don't gotta do what I did cause it's all about fishing. So that's what I'm gonna do. If you guys wanna see exactly how I installed it earlier today, you just stick around, we'll show you exactly how we did it. First things first, let's figure out where we're putting this thing. So I might get fancy with it later and actually mount it underneath our deck. But just so you guys can see what's going on, I'm just gonna mount it right here for right now. It does not come with any hardware. So you're gonna have to source that out yourself. Basically what I'm doing is just grabbing some self-tappers to run through. Okay. Nice and square. And just install all four sides. One thing I recommend is putting a switch in line with this. So, pretty much we're gonna go from the positive lead of the battery to one side of our switch and then the positive from our pump. I'll put a little terminal on here. Crimp it down. Just so we don't want this pump to pump all the time. It's just whenever it kind of rains. The deck that we put on this thing, it just doesn't keep all that water out. And the bad thing that we're used to doing is literally just pulling this boat out and then pulling the drain plug away in 10 minutes. I'd rather just get on the boat, flip a switch and let the water go. So that's what we're doing here. So with the switch, we're gonna be able to turn it on and off. I am gonna make this a lot cleaner later on, but just to give you an idea, we're basically going from positive lead of our battery to one side, and then the positive from our pump on the other. And if you are looking for a ring terminal or a switch, we have all that at each area. So we have a lot of different switches. I just went with this one just cause I knew I was gonna put on the outside of this battery box. So let me kind of line this stuff up, put it in, I hope you guys can see, but you get the gist of it. I'm gonna put this in, screw it down, And we're gonna be good to go. Now that the switch is all wired up, and again, I'm gonna make this pretty later. But now since it's off, we can go ahead and kind of connect these. It shouldn't turn on. So we'll see if I did it right or not. I'm confident. There's the negative side. And then for the positive side, it shouldn't turn on when I touch this. All right. So far so good. There we go. And now let's just make sure that it's working properly. Cool. One thing that we do not have for you guys on our website is the tubing. Just because it's a little big for what we usually use with water pumps. So for the outlet, we're gonna have about an inch inner diameter. For the inlet, we're gonna have an inch and a half inner diameter. So just go to your local hardware store and grab whatever pipe is gonna fit you. Depending on where you're putting it, It's gonna depend on how much you're really gonna need. But once you do that, you can get some hose clamps from us and basically just put it on just to make sure it's nice and tight and tighten them all down. Well, problem solved. Now I don't have to pull the boat out and take the drain plug out and it's gonna take about 10 minutes with this. It'll take a flip of the switch and maybe a minute or two to pump all this water out and then I'd get on the water. So that was the goal. And that's basically it for a look at the sea flow bilge pump for your boats, RVs or anything else..


Customer Reviews

Seaflo Macerator Pump for Boats and RVs - 12 GPM - 1-1/2" Inlet - 1" Outlet - 12V - SE64FR

Average Customer Rating:  5.0 out of 5 stars   (3 Customer Reviews)

Self-priming macerator pump empties your marine fish box, livewell receptacles, or RV sewer tank. 4-Blade chopper reduces risk of clogs. Sealed motor and durable powder coat prevent internal and external corrosion.

- SE64FR
by:

Installation was easy and works great! Thank you!



- SE64FR
by:

Good price fast delivery. Everything as described.



- SE64FR
by:


3
3

Ask the Experts about this Seaflo RV Water Pump

  • What is Lift Height of Seaflo Macerator Pump for Boats and RV's SE64FR
    The Seaflo Macerator Pump for Boats and RVs, # SE64FR offers self-priming to a 5' lift when wet and 4' lift when dry.
    view full answer...
  • Replacement Macerator Pump
    We currently carry the Seaflo Macerator Pump for Boats and RVs, # SE64FR and while the amp draw and voltage will work for a replacement, I don't know if the physical fitment will based on your statement of tight fit. It is longer but less than an inch. From the specs available to me from an online search, the Pentair Shur-Flo 3200-001 macerator pump for RV's has dimensions of 10.6" x 4.9" x 3.8" while our option has overall dimensions of 11-3/16" long x 5" wide x 3-7/8" tall. So that...
    view full answer...
  • How To Hook Up the Seaflo Macerator Pump On An RV
    The Seaflo Macerator Pump for Boats and RVs part # SE64FR is designed for RV use among other things so it will work great for this. It can be installed a few different ways but tapping into the existing waste valve is most common. I can't really comment on the exact parts as this will vary widely by application but you are basically just tee'ing into the waste pipe before the valve. I was able to find some diagrams for this online using a quick google search like "RV Macerator Pump Plumbing". If...
    view full answer...

Do you have a question about this RV Water Pump?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv water pump for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv water pump information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Adam E
Installed by:
Adam E
Employee Chris R
Video Edited:
Chris R
Employee Alexander C
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.