See what our Experts say about this Optronics Trailer Lights

• Grommet Recommendation for the Trailer Clearance and Side Marker Lights A91AB
  The Optronics Flush Mount Grommet for # AL91AB Series Trailer Clearance and Side Marker Lights # A91GB, will fit a hole that measures 2-7/8 inches across and 1-1/2 inches tall.
  view full answer...
• Replacement Rectangular Amber 2-1/2 Inch Long by 1-1/2 Inch Wide Clearance Lights
  The “SAE P2PC 98” you provided is a code used by the department of transformation and will not have any bearing on the correct replacement. In order to determine the correct replacement I would need you to either A) remove the lens and find the part number inscribed on the base or B) send me a dimensional photo of the light.
  view full answer...
  
• Replacement Trailer Taillight Recommendation for a Featherlite Utility Trailer 1693
  I pulled up a picture of your Featherlite Trailer model 1693 and found that the taillights closely resemble what comes with the # TL16RK. The clearance lights of this kit are very similar to what you need as well so this would be a great starting point. For additional amber clearance lights you would need part # A91AB and then for red part # A91RB.
  view full answer...
• Replacement Amber Clearance Light for a Peterson PM 150
  Sealed lights would have to be replaced since there is not easy way to get them open and maintain functionality of the light. Your light looks similar to # A91AB. This light measures 2-1/2 inches across, 1-3/16 inches tall and 7/8 inches deep. It mounts in base # A91BB and can use harness # A91LW.
  view full answer...
  
• Replacement Marker Light for 2011 Tiffin Open Road Motorhome Mirror
  The # A91AB Optronics Trailer Clearance and Side Marker Light will work as a replacement for your current marker light. This has the same 2-1/2" x 1-3/16" dimensions as your current light and accepts the standard 2-prong plug which would be the the 2-pin connection you are describing. This has light has the same two tabs you mentioned on each end to fit in your mounting bracket. If you would like to replace both lights there is also an LED option which is the # AL91AB Thinline LED Clearance...
  view full answer...
• Replacement Amber Mini Trailer Clearance Light For Wesbar 3395
  We have just what you are looking for. The replacement clearance light we offer is the Optronics Mini Rectangular Clearance Light, part # A91AB. This is an amber light that measures 2-1/2 inches long x 1-3/16 inches wide x 7/8 inch deep. This light requires the # A91LW pigtail to complete the wiring and a mounting bracket. The bracket is available in black, part # A91BB. For a chrome finish, use # A91CB.
  view full answer...
• Matching Amber LED Light To A ThinLine LED Mini Trailer Clearance or Side Marker Light # AL90RCB
  While we don't currently offer a matching light to the ThinLine LED Mini Trailer Clearance or Side Marker Light # AL90RCB with an amber LED we do offer the FLEET Count Mini Thinline LED Clearance or Side Marker # AL90AB which has the same dimensions and an amber lens instead.
  view full answer...
• Replacement 2-1/2 x 1-1/4 Inch Amber and Red Trailer Clearance Lights and Chrome Base
  Based on your picture it looks like you are in need of some replacement lights and a bracket. It looks like you will need amber light # A91AB, red light # A91RB, and bracket # A91CB. And if you need the single wire (since the lights will ground through the bracket and mounting hardware) use # A91LW.
  view full answer...
  
• Replacement Wiring Needed for a 6 x 10 foot Trailer
  We don't actually manufacture our wiring harnesses, but we do have some options available for you. You can use the Wesbar Wiring Harness # 002220 to replace the wiring on your 6 x 10 aluminum trailer. To complete the installation you will only need a Ring Terminal # DW05702-1 and Butt Connectors, part # DW05744-5 for 5 or part # DW05744-10 for 10. Just simply splice in the lights that you have into the wiring. If you don't already have lights then you can use the Trailer Light Kit #...
  view full answer...
• What is Meant by PC-Rated Trailer Lighting and When Are This Type Required
  The term PC-Rated in reference to trailer lighting means Photometrically Certified. What this means in actual practice is that a light fixture is viewable from a 90-degree angle. Other non-PC-rated lights are considered to be viewable from a 45 degree angle. The PC-rated 90-degree viewable angle can be built-in to a light fixture (as in the case of a PC-rated light) or it can be achieved by mounting a non-PC-rated light such as # A91AB on the trailer in such a way that is can be seen from...
  view full answer...
• Is There a Difference Between the F008584-2 and the F008594-2
  Yes. The only difference between the Fulton # F008584-2 and the Fulton # F008594-2 is the color. Both of these step fenders are designed for 14" wheels. If you need mounting brackets you can use the Mounting Brackets for Trailer Fender - 13"/14"/15" Wheels - Galvanized Steel - Qty 2 # CE26098G-2 and you can add clearance lights on these fenders with the Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber # AL91AB (LED) or # A91AB (incandescent). I've...
  view full answer...
• Do You Have a Amber Clearance Light that Takes a Two Male Prong Wire Harness PL-10?
  Hello Bob, It sounds like the light you are talking about takes an industry standard PL-10 plug in like the Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead # A46PB. If that is the case we do have some clearance lights that use that style plug, but they are not the Peterson brand. We have the Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber # AL91AB, or the Optronics Trailer Clearance and Side Marker Light -...
  view full answer...
• What I Need To Install LED Trailer Lights On A Tent Trailer
  I have the perfect way for you to install tailights on your tent trailer with everything you will need although it will not come in a kit.You will want to piece together a lighting assembly for your tent trailer with your exact specifications, which I have done for you. For a set of round, surface mounted, LED taillights, I recommend using the Transit Tail Light part # STL90RB. These taillights are 7" wide X 1-7/16" thick and will work well for you. We also have a similar set of running...
  view full answer...
• Is there a Grommet for Peterson Clearance Light # M152A
  For a rubber grommet that will fit the Peterson clearance light # M152A you can use # A91GB. If you are looking for the plastic base we do not carry that particular model and in that case I recommend switching to light # A91AB and using bracket # A91BB with power wire # A91LW (the light grounds through one of the mounting screws with this light and bracket combination).
  view full answer...
• Recommended Optronics LED Clearance Light for a Trailer
  Hey Gus, it looks like the Optronics LED Clearance or Side Marker Light # MCL95AB is going to be the LED version of the # A91AB you're looking at. This light is a bit smaller though, measuring 3/8" shorter and 1/16" narrower, but it is 3/16" deeper.
  view full answer...
• Clearance Light Base Recommendation for the Clearance Light part # A91AB
  It sounds like you need the Black Mounting Bracket # A91BB. This is the black base for the Rectangular Trailer Clearance and Side Marker Light # A91AB that you referenced. Check out the review videos I attached for these products also.
  view full answer...
• How to Mounting the Mounting Bracket for A91 and AL91 Series Trailer Lights
  I would recommend using stainless steel sheet metal screws for mounting the Mounting Bracket for A91 and AL91 Series Trailer Clearance, Side Marker Lights, since the connection to the trailer needs to make a good ground connection.
  view full answer...
• Submersible Replacement Trailer Lights for Peterson Mfg. Company PM150A and PM150B
  The exact replacement for the Petersen lights you have PM150A and PM150R is the part # A91RB for red and part # A91AB for amber. These are submersible like you are wanting as well.
  view full answer...
• What Wiring and Accessories are Needed For Side Marker Trailer Light # A91AB
  The Sealed, Mini Rectangular Trailer Clearance and Side Marker Light, # A91AB, requires a pigtail and a mounting bracket. The pigtail is # A91LW. I have included a link to a video showing a typical installation for you. For a bracket, there are a couple of options. For black, use # A91BB. For a chrome finish, use # A91CB.
  view full answer...
• How Does Clearance Light Included with Trailer Light Kit part # TL16RK Wire to Trailer
  The clearance lights of the # TL16RK are the part # A91AB with the bracket part # A91CB. The assembly grounds through the mounting hardware and the single wire part # A91LW that comes with it runs to the running light circuit of the trailer like you mentioned.
  view full answer...
• Availability of Red Version of # A91AB
  Yes, we have the red version of the # A91AB as part # A91RB.
  view full answer...
• Will an Amber Side Marker Light Work on a 12 Volt System
  Optronics sealed marker light # A91AB is indeed an incandescent light and it is sealed so you cannot access the bulb to change it. A 6 volt system will not be enough for an incandescent bulb especially since the system will likely be powering more than one bulb at a time. The LED version draws less power but is still designed to work on a 12 volt system and will probably also not work despite drawing fewer amps. We do not offer lights specifically for 6 volt systems at this time.
  view full answer...
• Can the Amber Trailer Clearance and Side Marker Light, Part # A91AB Be Used on an Aluminum Trailer
  This light should work fine on your trailer. The fixture receives its ground connection via its mounting hardware.
  view full answer...
• Amber Version of the Clearance Light part # MCL98RB Availability
  To get an amber, LED version of the part # MCL93RB you would need to order replacement lens part # A91AB and then replace the red lenses with the amber lens. On the front of a trailer you need to have the amber lights displayed and on the back red.
  view full answer...

Do you have a question about this Trailer Light?