See what our Experts say about this CURT Pintle Hitch

• Recommended 2 Inch Pintle Hook for 80 Series Land Cruiser
  We have a wide selection of pintle hitch accessories available. It sounds like you may be looking for something like the Curt Pintle Hook with 2 Inch Hitch Ball # C48190. This is a pintle hook and hitch ball combination that includes hardware for a bolt-on installation. The 4 hole mounting holes will allow for installation onto a pintle hook mounting plate. The pintle hook itself has a 16,000 pound gross towing weight while the included 2 inch hitch ball has a 10,000 pound weight capacity....
  view full answer...
• What is Needed for a Pintle Hook for a Ford F-250 Super Duty to Tow a Trailer Level
  You will want a pintle hitch or any ball mount on a vehicle at the appropriate height to tow the trailer level. To do this you will need to park the vehicle and trailer on level ground and take some measurements. I have included a link to an FAQ article that will help. On a pintle hitch you would need to measure from the ground to opening on the hook part and on the ring measure from the ground to the bottom of the ring. Once you know the rise or drop you need what you can do is get an...
  view full answer...
• Pintle Hitch with 6 Inch Rise to Clear Spare Tire on a Jeep Liberty
  Given the low weight of the trailer you might be able to use an extension such as # HE06 since none of the pintle mounts will come out far enough to clear the spare tire on your Jeep Liberty. However, the use of an extender will reduce the tongue weight capacity of the hitch by 50 percent. As long as the tongue weight does not exceed the reduced tongue weight it will work. You could use a pintle hook mount, # 63058, with pintle hitch # C48205. If that will not work, then the easiest solution...
  view full answer...
• Will Pintle Hook Ball Mount Work With 2017 Ram 1500?
  The Curt Pintle Hook Mounting Plate # C48323 is not vehicle-specific; it is for use with 2" x 2" trailer hitch receivers and if that's what your 2017 Ram 1500 has then yes, it will work just fine. I've added a link to a review video of this mounting plate for you to take a look at.
  view full answer...
• Will a Reese Pintle Hook Fit Curt Mount # C48323
  The hole spacing on the Curt pintle mount # C48323 is 3-5/16 inches on center side to side and 1-3/4 inches on center up and down. Pintle hook/ball combo # C48200 or regular pintle hook # C48215 have the same mounting pattern so they will work. If you already have a Reese pintle hitch then it would just need to have the same mounting pattern.
  view full answer...
• Lengths of Curt Pintle Hook Ball Mounts C48007 and C48190 with C48323
  I spoke with my contact at Curt and he informed me that the length of the # C48007 is 9.9 inches and the part # C48190 with the # C48323 measures 12.875 inches. Since you want shorter you would want the part # C48007.
  view full answer...